[opensuse] Error - KInternet (Could not connect to local server. Maybe smpppd is not running...)
I'm a newbie, and recently newly installed OpenSuSE version 10.3 (KDE) and I have problem to connect internet using my mobile phone Nokia 6230 via USB cable to my computer. After logon with root account and then trying to troubleshoot my problem to connect to ISP. Could you please advise me for the pop-up error message whenever I run KInternet. Thank you. Note, this mobile phone is working fine if I running under Windows XP. Error - KInternet (Could not connect to local server. Maybe smpppd is not running or you are not member of the group "dialout". Also check the server settings in the dialog "Various Settings".) _*Please find the below is the extracted from command dmesg :*_ usb 3-2: new device found, idVendor=0421, idProduct=040f usb 3-2: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-2: Product: Nokia 6230 usb 3-2: Manufacturer: Nokia usb 3-2: configuration #1 chosen from 1 choice _*Then I run the command # wvdialconf /etc/wvdial.conf*_ Editing `/etc/wvdial.conf'. Scanning your serial ports for a modem. ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Modem Port Scan<*1>: S1 S2 S3 ttyS4<Info>: No such device or address Modem Port Scan<*1>: S4 ttyS5<Info>: No such device or address Modem Port Scan<*1>: S5 ttyS6<Info>: No such device or address Modem Port Scan<*1>: S6 ttyS7<Info>: No such device or address Modem Port Scan<*1>: S7 WvModem<*1>: Cannot get information for serial port. ttyACM0<*1>: ATQ0 V1 E1 -- OK ttyACM0<*1>: ATQ0 V1 E1 Z -- OK ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttyACM0<*1>: Modem Identifier: ATI -- Nokia ttyACM0<*1>: Speed 4800: AT -- OK ttyACM0<*1>: Speed 9600: AT -- OK ttyACM0<*1>: Speed 19200: AT -- OK ttyACM0<*1>: Speed 38400: AT -- OK ttyACM0<*1>: Speed 57600: AT -- OK ttyACM0<*1>: Speed 115200: AT -- OK ttyACM0<*1>: Speed 230400: AT -- OK ttyACM0<*1>: Speed 460800: AT -- OK ttyACM0<*1>: Max speed is 460800; that should be safe. ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK Found an USB modem on /dev/ttyACM0. Modem configuration written to /etc/wvdial.conf. ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" _*Then followed by the command # wvdial*_ --> WvDial: Internet dialer version 1.56 (abuild@mandelbrot) --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Sending: AT+cso=33 AT+cso=33 ERROR --> Bad init string. --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Sending: AT+cso=33 AT+cso=33 ERROR --> Bad init string. --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Sending: AT+cso=33 AT+cso=33 ERROR --> Bad init string. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
participants (1)
-
williamkow