Hi On Thu, Feb 26, 2009 at 2:52 PM, Marcus Meissner wrote:

On Thu, Feb 26, 2009 at 03:49:24PM +0100, LLLActive@GMX.Net wrote:

...

Hi,

can anyone help with these errors? What is "_kernel(default:lib) = 3da5922757d6e24e_" or "_kernel(trace:mm) = 67506958a8c60f3c_". I have not seen such an error message before.

Yes, I have the same errors, just install the new kernel which will match the nvidia driver version :) as Marcus suggested.

Go for a cup of coffee, come back in two hours and then install the all new fresh and dancing 11.1 Kernel update that matches above KMPs :) (I just released it, it will take one or two hours to the mirrors.)

Ciao, Marcus

here, I would like to ask, there is possible to keep also the old kernel and try the new one. "zypper lu" shows me the new kernel, and if I will do "zypper update" the old kernel will be removed and the new one added, but I would like to test the new kernel before remove the old one. I suppose that "zypper install new_kernel" will do the trick, am I right? If not, how is it possible to keep the old kernel also? Thanks, Ionut -- === Ioan Vancea http://www.vioan.ro -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org

On Fri, Feb 27, 2009 at 11:49:53AM +0100, Marcus Meissner wrote:

In /etc/zypp/zypp.conf is a commented out line with multiversion =

Change it to:

multiversion = kernel-default

(or your kernel flavour, perhaps kernel-pae)

And libzypp will keep all old versions.

Don't forget to add your nvidia kmp names to the list as well... Cheers, Michael. -- Michael Schroeder mls@suse.de SUSE LINUX Products GmbH, GF Markus Rex, HRB 16746 AG Nuernberg main(_){while(_=~getchar())putchar(~_-1/(~(_|32)/13*2-11)*13);} -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org

Hi, On Fri, Feb 27, 2009 at 2:03 PM, Ionut Vancea wrote:

On Fri, Feb 27, 2009 at 10:49 AM, Marcus Meissner wrote:

...

In /etc/zypp/zypp.conf is a commented out line with multiversion =

Change it to:

multiversion = kernel-default

(or your kernel flavour, perhaps kernel-pae)

And libzypp will keep all old versions.

Ciao, Marcus

Ofcourse I did already the update before to see your answer :) and now I have just the new kernel, the old one has been removed. Now, with the new kernel everything seems to be fine, but during the boot process I see the following: ......[skip]............. iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks iwl3945: Copyright(c) 2003-2008 Intel Corporation iwl3945 0000:06:00.0: power state changed by ACPI to D0 vendor=8086 device=27d2 iwl3945 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwl3945 0000:06:00.0: setting latency timer to 64 iwl3945: Detected Intel Wireless WiFi Link 3945ABG iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels phy0: Selected rate control algorithm 'iwl-3945-rs' loop: module loaded ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ------------[ cut here ]------------ WARNING: at kernel/softirq.c:137 local_bh_enable+0x3c/0x92() Modules linked in: sha256_generic aes_x86_64 aes_generic cbc ohci_hcd dm_crypt loop arc4 ecb crypto_blkcipher iwl3945 snd_hda_intel pcmcia rfkill snd_pcm uvcvideo hci_usb(N) snd_timer mac80211 iTCO_wdt i2c_i801 video snd_page_alloc ohci1394 yenta_socket nvidia(PX) iTCO_vendor_s upport rtc_cmos rsrc_nonstatic tifm_7xx1 compat_ioctl32 snd_hwdep videodev ieee1394 btusb battery led_class ac snd output usb_storage rtc_c ore tifm_core sony_laptop pcspkr button sr_mod v4l1_compat joydev intel_agp rtc_lib pcmcia_core sky2 i2c_core soundcore cdrom cfg80211 blue tooth sg usbhid hid ff_memless ehci_hcd uhci_hcd sd_mod crc_t10dif usbcore dm_snapshot dm_mod edd ext3 mbcache jbd fan ide_pci_generic piix ide_core ata_generic ata_piix libata scsi_mod dock thermal processor thermal_sys hwmon Supported: No Pid: 2095, comm: cryptsetup Tainted: P 2.6.27.19-3.2-default #1 Call Trace: [<ffffffff8020da29>] show_trace_log_lvl+0x41/0x58 [<ffffffff8049a3da>] dump_stack+0x69/0x6f [<ffffffff8023d562>] warn_on_slowpath+0x51/0x77 [<ffffffff802425b3>] local_bh_enable+0x3c/0x92 [<ffffffff80433be7>] sk_filter+0x97/0xa0 [<ffffffff80441a42>] netlink_broadcast+0x220/0x386 [<ffffffff803614cd>] kobject_uevent_env+0x452/0x520 [<ffffffff803401d7>] set_disk_ro+0x58/0x8d [<ffffffffa00ea1d1>] __bind+0x11d/0x136 [dm_mod] [<ffffffffa00ea23e>] dm_swap_table+0x54/0x70 [dm_mod] [<ffffffffa00ee766>] do_resume+0xa9/0x122 [dm_mod] [<ffffffffa00ef17d>] ctl_ioctl+0x1cb/0x213 [dm_mod] [<ffffffffa00ef1d3>] dm_ctl_ioctl+0xe/0x12 [dm_mod] [<ffffffff802bd249>] vfs_ioctl+0x21/0x6c [<ffffffff802bd4b6>] do_vfs_ioctl+0x222/0x231 [<ffffffff802bd516>] sys_ioctl+0x51/0x73 [<ffffffff8020bfbb>] system_call_fastpath+0x16/0x1b [<00007f5d03eacb77>] 0x7f5d03eacb77 ---[ end trace ac204b9e083915ce ]--- kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. fuse init (API version 7.9) JBD: barrier-based sync failed on dm-1 - disabling barriers Adding 3140180k swap on /dev/mapper/cr_sda3. Priority:-1 extents:1 across:3140180k type=1505 audit(1235740332.546:2): operation="profile_load" name="/bin/ping" name2="default" pid=2445 type=1505 audit(1235740332.582:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=2446 type=1505 audit(1235740332.646:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=2447 type=1505 audit(1235740332.714:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=2448 type=1505 audit(1235740332.826:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=2453 type=1505 audit(1235740332.931:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=2492 type=1505 audit(1235740333.411:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=2494 type=1505 audit(1235740333.539:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=2511 type=1505 audit(1235740333.635:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=2531 type=1505 audit(1235740333.727:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=2556 NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or .......[skip]........... So, I see that WARNING after I introduce the passphrase in order to be mounted /swap partition. The message does not repeat when I introduce the passphrase for /home partition I encrypted just /swap and /home during the installation of the system and I didn't see that warning and that Call Trace with the old kernel. So, something is wrong with the new kernel install or just to ignore that warning? Thank you again. -- === Ioan Vancea http://www.vioan.ro -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org

Marcus Meissner wrote:

On Thu, Feb 26, 2009 at 03:49:24PM +0100, LLLActive@GMX.Net wrote:

...

Hi,

can anyone help with these errors? What is "_kernel(default:lib) = 3da5922757d6e24e_" or "_kernel(trace:mm) = 67506958a8c60f3c_". I have not seen such an error message before.

#### YaST2 conflicts list - generated 2009-02-26 11:58:58 ####

nothing provides kernel(default:lib) = 3da5922757d6e24e needed by nvidia-gfxG02-kmp-default-180.29_2.6.27.18_0.3-0.1.x86_64

[ ] do not install nvidia-gfxG02-kmp-default-180.29_2.6.27.18_0.3-0.1.x86_64

nothing provides kernel(trace:mm) = 67506958a8c60f3c needed by nvidia-gfxG02-kmp-trace-180.29_2.6.27.18_0.3-0.1.x86_64

[ ] do not install x11-video-nvidiaG02-180.29-0.1.x86_64

#### YaST2 conflicts list END ###

System: OpenSUSE 11.1, KDE 3.5, uname -a Linux Server-1 2.6.27.7-9-default #1 SMP 2008-12-04 18:10:04 +0100 x86_64 x86_64 x86_64 GNU/Linux

Yes.

Go for a cup of coffee, come back in two hours and then install the all new fresh and dancing 11.1 Kernel update that matches above KMPs :) (I just released it, it will take one or two hours to the mirrors.)

Ciao, Marcus

Great, now it works. Thanx :-) Al -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org