Re: [opensuse] nvidia display proble in 11.3
On Saturday 17 July 2010 13:33:01 lynn wrote:
On Saturday 17 July 2010 13:17:56 Ken Schneider - openSUSE wrote:
On 07/17/2010 06:58 AM, lynn pecked at the keyboard and wrote:
Hi everyone
I just upgraded from 11.2 to 11.3. Now the maximum resolution I can get is 1280 x 960 and it is slow with poor quality. Before I had 1440 x 900 with crisp fast graphics.
I've tried nomodeset on the kernel line as per the release instructions.
Does anyone have any idea how to fix this? nvidia 6100.
Thanks.
You need to install nvidia driver from their site.
Hi Ken. Thanks. Is it this one? I have an amd 64:
Linux AMD64/EM64T Latest Version: 256.35
TIA Hi After a lot of fighting with a similar problem, my screen referrer 1440x900, but Xorg went to 1440x960 all the time. I put this line in my .bashrc file xrandr --output default --mode 1440x900 --preferred
btw running 11.3 updated from 11.2 with Nvidia 256.35 from nvidia.com -- greeting Joel Young -- Greetings from Joel Young aka JULLE -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Saturday 17 July 2010 20:04:48 Joel Young wrote:
On Saturday 17 July 2010 13:33:01 lynn wrote:
On Saturday 17 July 2010 13:17:56 Ken Schneider - openSUSE wrote:
On 07/17/2010 06:58 AM, lynn pecked at the keyboard and wrote:
Hi everyone
I just upgraded from 11.2 to 11.3. Now the maximum resolution I can get is 1280 x 960 and it is slow with poor quality. Before I had 1440 x 900 with crisp fast graphics.
I've tried nomodeset on the kernel line as per the release instructions.
Does anyone have any idea how to fix this? nvidia 6100.
Thanks.
You need to install nvidia driver from their site.
Hi Ken. Thanks. Is it this one? I have an amd 64:
Linux AMD64/EM64T Latest Version: 256.35
TIA
Hi After a lot of fighting with a similar problem, my screen referrer 1440x900, but Xorg went to 1440x960 all the time. I put this line in my .bashrc file xrandr --output default --mode 1440x900 --preferred
btw running 11.3 updated from 11.2 with Nvidia 256.35 from nvidia.com
Thanks Joel That did it. You saved me a lot of time. L x -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Saturday 17 July 2010 20:04:48 Joel Young wrote:
On Saturday 17 July 2010 13:33:01 lynn wrote:
On Saturday 17 July 2010 13:17:56 Ken Schneider - openSUSE wrote:
On 07/17/2010 06:58 AM, lynn pecked at the keyboard and wrote:
Hi everyone
I just upgraded from 11.2 to 11.3. Now the maximum resolution I can get is 1280 x 960 and it is slow with poor quality. Before I had 1440 x 900 with crisp fast graphics.
I've tried nomodeset on the kernel line as per the release instructions.
Does anyone have any idea how to fix this? nvidia 6100.
Thanks.
You need to install nvidia driver from their site.
Hi Ken. Thanks. Is it this one? I have an amd 64:
Linux AMD64/EM64T Latest Version: 256.35
TIA
Hi After a lot of fighting with a similar problem, my screen referrer 1440x900, but Xorg went to 1440x960 all the time. I put this line in my .bashrc file xrandr --output default --mode 1440x900 --preferred
btw running 11.3 updated from 11.2 with Nvidia 256.35 from nvidia.com
Hi I put the xrandr command in my /home/lynn/.bashrc file Is there a global system wide file which does the same for all users? Thanks. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Sunday 18 July 2010 09:56:40 lynn wrote:
On Saturday 17 July 2010 20:04:48 Joel Young wrote:
On Saturday 17 July 2010 13:33:01 lynn wrote:
On Saturday 17 July 2010 13:17:56 Ken Schneider - openSUSE wrote:
On 07/17/2010 06:58 AM, lynn pecked at the keyboard and wrote:
Hi everyone
I just upgraded from 11.2 to 11.3. Now the maximum resolution I can get is 1280 x 960 and it is slow with poor quality. Before I had 1440 x 900 with crisp fast graphics.
I've tried nomodeset on the kernel line as per the release instructions.
Does anyone have any idea how to fix this? nvidia 6100.
Thanks.
You need to install nvidia driver from their site.
Hi Ken. Thanks. Is it this one? I have an amd 64:
Linux AMD64/EM64T Latest Version: 256.35
TIA
Hi After a lot of fighting with a similar problem, my screen referrer 1440x900, but Xorg went to 1440x960 all the time. I put this line in my .bashrc file xrandr --output default --mode 1440x900 --preferred
btw running 11.3 updated from 11.2 with Nvidia 256.35 from nvidia.com
Hi I put the xrandr command in my /home/lynn/.bashrc file
Is there a global system wide file which does the same for all users?
Thanks. Hi A good place would be /etc/bash.bashrc.local
-- Greetings from Joel Young aka JULLE -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Hello, On Sun, 18 Jul 2010, Joel Young wrote:
I put the xrandr command in my /home/lynn/.bashrc file [..] A good place would be /etc/bash.bashrc.local
Neither are a good place. You should use ~/.xinitrc or /etc/X11/xinit/xinitrc (after the "Add your own lines" comment). I have e.g. 'xset -b b 0' and a 'nvclock' call there ;) HTH, -dnh -- +-------------------------------------------------------------------+ |-- SELF-ASSEMBLY MOEBIUS-STRIP - SEE OTHER SIDE FOR INSTRUCTIONS --| +-------------------------------------------------------------------+ -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Sunday 18 July 2010 14:16:30 David Haller wrote:
Hello,
On Sun, 18 Jul 2010, Joel Young wrote:
I put the xrandr command in my /home/lynn/.bashrc file
[..]
A good place would be /etc/bash.bashrc.local
Neither are a good place. You should use ~/.xinitrc or /etc/X11/xinit/xinitrc (after the "Add your own lines" comment).
I have e.g. 'xset -b b 0' and a 'nvclock' call there ;)
HTH, -dnh
Hi 2 methods work: /home/lynn/.bashrc /etc/X11/xinit/xinitrc I suppose one would need create: /etc/bash.bashrc.local It's not present on my 11.3 box but I'm sure it would work equally well. Not sure why one method is better than the other other than one is local and the other two are system wide Thanks. L x -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 2010-07-18 14:45, lynn wrote:
2 methods work:
/home/lynn/.bashrc
/etc/X11/xinit/xinitrc
I suppose one would need create:
/etc/bash.bashrc.local
It's not present on my 11.3 box but I'm sure it would work equally well.
Not sure why one method is better than the other other than one is local and the other two are system wide
Because the "bashrc" is run every time you open a terminal, be it in text mode, or inside X. Every time you have an interactive session it will be run - not only when you are starting X. The correct place is indeed the xinitrc file - which can be systemwide or per user. - -- Cheers / Saludos, Carlos E. R. (from 11.2 x86_64 "Emerald" GM (Elessar)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/ iEYEARECAAYFAkxC/skACgkQU92UU+smfQU20wCgh6AmbO/13gf7lCMAkK93ic83 QD8AmQHUtWaEVfbi17NIvfpQ5jsbxpV2 =K+bZ -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Hello, On Sun, 18 Jul 2010, Carlos E. R. wrote:
On 2010-07-18 14:45, lynn wrote:
2 methods work:
/home/lynn/.bashrc
For "interesting" definitions of working.
/etc/X11/xinit/xinitrc
I suppose one would need create:
/etc/bash.bashrc.local
Yes.
Because the "bashrc" is run every time you open a terminal, be it in text mode, or inside X. Every time you have an interactive session it will be run - not only when you are starting X.
And it will not be run at all if you decide to use pdksh or zsh ...
The correct place is indeed the xinitrc file - which can be systemwide or per user.
Thanks Carlos, for your clarification. -dnh -- If someone attacks me in the office, my response will be to take off my shoes, tie the laces together and throw them at my assailant like a bolas. If it doesn't strangle them, the smell will kill them. -- Kevin G. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On 2010/07/18 03:56 (GMT-0400) lynn composed:
On Saturday 17 July 2010 20:04:48 (GMT+0200) Joel Young wrote:
After a lot of fighting with a similar problem, my screen referrer 1440x900, but Xorg went to 1440x960 all the time. I put this line in my .bashrc file xrandr --output default --mode 1440x900 --preferred
.bashrc is intended for bash, your login shell, which runs on every login, not really what you want for commands designed to be run only for X. Did you try putting it in ~/.xinitrc (which isn't necessary by default)?
I put the xrandr command in my /home/lynn/.bashrc file
Is there a global system wide file which does the same for all users?
I put global xrandr commands in /etc/X11/xinit/xinitrc. No one's told me a better place when I've asked about problems with xrandr commands used there. It seems when you have multiple xrandr commands, order of execution is important, as well as order of command line parameters, which can make getting configured quite confusing and frustrating. -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Sunday 18 July 2010 14:23:12 Felix Miata wrote:
On 2010/07/18 03:56 (GMT-0400) lynn composed:
On Saturday 17 July 2010 20:04:48 (GMT+0200) Joel Young wrote:
After a lot of fighting with a similar problem, my screen referrer 1440x900, but Xorg went to 1440x960 all the time. I put this line in my .bashrc file xrandr --output default --mode 1440x900 --preferred
.bashrc is intended for bash, your login shell, which runs on every login, not really what you want for commands designed to be run only for X. Did you try putting it in ~/.xinitrc (which isn't necessary by default)?
I put the xrandr command in my /home/lynn/.bashrc file
Is there a global system wide file which does the same for all users?
I put global xrandr commands in /etc/X11/xinit/xinitrc. No one's told me a better place when I've asked about problems with xrandr commands used there. It seems when you have multiple xrandr commands, order of execution is important, as well as order of command line parameters, which can make getting configured quite confusing and frustrating. Thanks for clarify this, I put it there after finding it put there in nvnew forum --
Greetings from Joel Young aka JULLE -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
participants (5)
-
Carlos E. R. -
David Haller -
Felix Miata -
Joel Young -
lynn