Boycot Intel Pentium III <http://www.bigbrotherinside.com/> ---------- Forwarded message ---------- Date: Mon, 13 Mar 2000 13:25:45 -0500 (EST) From: Mark B Withers <gooober@one.net> To: Timothy Metz <tmetz@frankfurt.netsurf.de> Subject: Re: [SLE] Samba I should have specified more information here. I have the client for mircosoft networks installed, have also disabled the dummy eth0 device on my Linux box and have also specified "netbios name =" parameter in the /etc/smb.conf file. I think all of this has to do with an Internet explorer upgrade that I downloaded from MS. This was so that I could play active X games on the internet. Anyway, this is just a theory but I believe that's how I lost the "change password" tab. I have an "Internet" option in the control panel which looks a lot like Internet Explorer. Maybe I will have to uninstall Internet Explorer to get everything to work? I have followed the instructions in "Using Samba" by Oreilly & associates to configure it on the Windows side except for the "password" option for the reasons I previously described. On Mon, 13 Mar 2000, Timothy Metz wrote: | this may sound stupid, but, you do have "client for microsoft networks" | installed, right? | | Tim | | ----- Original Message ----- | From: "Mark B Withers" <gooober@one.net> | To: "Chris Reeves" <chris.reeves@iname.com> | Cc: "Derek Fountain" <fountai@hursley.ibm.com>; "SuSE Mailing List" | <suse-linux-e@suse.com> | Sent: Monday, March 13, 2000 6:19 PM | Subject: Re: [SLE] Samba | | | > I have the same problem with S.u.S.E. 6.1 and Samba. | > | > I can't get Windows '95 to recognise it in Network Neighborhood, nor | > can I map a drive to it. I can, however find my Linux box if I search | > for it. Maybe there's a port disabled by default that I have to | > enable in the inetd? | > | > I think the problem may also be that my Windows '95 just isn't trying | > to log onto the network. In the Samba book, it says to enable the | > password by double-clicking on "passwords" in the control panel, then | > click on the 3rd tab "Change Passwords". When I double-click on | > "Passwords" in the control panel, the "Change Passwords" tab is | > missing! I have managed to hunt and find it elsewhere, but it doesn't | > seem to work at all. | > | > Any suggesstions would be appreciated. Also maybe an example of how | > to use the "map network drive" option. It doesn't seem to work as | > well because the reply is "not logged in". | > | > Mark | > | > On Mon, 13 Mar 2000, Chris Reeves wrote: | > | > | Derek Fountain wrote: | > | > | > | > This is true, but my SuSE-6.1 box has the netbios name | > | > exported, as does my SuSE-6.3 box. The config files are | > | > pretty much identical. Works fine on 6.3, not on 6.1. There | > | > must be a problem with Samba on 6.1, or a problem I put in | > | > my hand rolled kernel on the 6.1 box. I thought it was a bit | > | > odd, but it seems someone else has the same problem. | > | | > | Have you checked to see if the dummy network device is active with | 'ifconfig'? | > | SuSE may well have turned off dummy network device by default in SuSE | 6.3, but | > | it certainly wasn't off by default in 6.1. See my post earlier for | details... | > | | > | > > it's the netbios export that makes it visible - MS networking relies | on | > | > > NetBios (aka netBEUI) regardless of the TCP/IP transport. Without a | valid | > | > > netbios name export there's nothing for Network Neighborhood to see. | Doing | > | > > a "net use" to connect to a samba box keeps the machine alive in the | > | > > browser. | > | > > | > | > > On Monday, March 13, 2000 8:25 AM, Derek Fountain | > | > > [SMTP:fountai@hursley.ibm.com] wrote: | > | > > > I have exactly the same problem with one of my servers. One | > | > > > machine is 6.1 based with a hand rolled 2.2.12 kernel, and | > | > > > that doesn't show up in Network Neighbourhood. The other is | > | > > > 6.3 based, with the stock SuSE kernel and that does show up. | > | > > > Both use the same config file (with the odd very slight | > | > > > tweak such as netbios name, etc). | > | > > > | > | > > > I can still map a network drive from the 6.1 machine by | > | > > > naming it explictly, and that's all I needed, so I stopped | > | > > > worrying about it. Still a bit odd though. | > | > > > | > | > > > The really annoying thing is that I saw the solution to this | > | > > > some time ago, thought "Oh, that's the problem!", then | > | > > > forgot both what the soultion was and where I saw it! I seem | > | > > > to remember that you needed something compiled into the | > | > > > kernel. | > | > > > | > | > > > | > | > > > > James Smith wrote: | > | > > > > | > | > > > > I'm trying to set up samba on Suse 6.1 to enanble | > | > > > > file/print sharing with my Windows based PC. I have set | > | > > > > up all the shares as necessary and set all permissions and | > | > > > > any administrative options correctly for my set up | > | > > > > according to their suggestions. However, My Windows | > | > > > > machine will not find my Linux machine in Network | > | > > > > neighbourhood, or by using find computer. I was able to | > | > > > > set up my printer, however, and get it to print out. Any | > | > > > > suggestions? | > | | > | Hope that helps, | > | Chris | > | -- | > | __ _ | > | -o)/ / (_)__ __ ____ __ Chris Reeves | > | /\\ /__/ / _ \/ // /\ \/ / ICQ# 22219005 | > | _\_v __/_/_//_/\_,_/ /_/\_\ | > | | > | -- | > | To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com | > | For additional commands send e-mail to suse-linux-e-help@suse.com | > | Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/ | > | | > | > | > -- | > To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com | > For additional commands send e-mail to suse-linux-e-help@suse.com | > Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/ | > | > | -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
Mark B Withers wrote:
Boycot Intel Pentium III <http://www.bigbrotherinside.com/>
[snip] Many people are concerned about the processor serial number in the Pentium ///, but what about the MAC address inside every NIC? For an interesting walk down Windows Security Lane, head on over to www.grc.com and let him read your MAC address (N/A Linux). The brief discussion at http://www.bigbrotherinside.com on MAC addresses may have been valid three years ago, but is rapidly becoming obsolete. Cable modems and DSL are more and more commonplace. In my office alone, half of us have cable and the other half are on dial-up ISP's. This indicates half of us (in the U.S.) can be tracked via MAC address regardless of processor. Fortunatly, my stealth firewall scripts eliminate that little problem. And Linux is spreading one by one as I set up Linux-based firewalls. -- George Toft http://www.georgetoft.com -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
On Wed, 15 Mar 2000, George Toft wrote:
Mark B Withers wrote:
Boycot Intel Pentium III <http://www.bigbrotherinside.com/>
[snip]
Many people are concerned about the processor serial number in the Pentium ///, but what about the MAC address inside every NIC? For an interesting walk down Windows Security Lane, head on over to www.grc.com and let him read your MAC address (N/A Linux).
The brief discussion at http://www.bigbrotherinside.com on MAC addresses may have been valid three years ago, but is rapidly becoming obsolete. Cable modems and DSL are more and more commonplace. In my office alone, half of us have cable and the other half are on dial-up ISP's. This indicates half of us (in the U.S.) can be tracked via MAC address regardless of processor.
Fortunatly, my stealth firewall scripts eliminate that little problem. And Linux is spreading one by one as I set up Linux-based firewalls.
-- George Toft http://www.georgetoft.com
Fortunately they are easy to change. A recent thread on FreeBSD -questions list discussed this thoroughly. www.freebsd.org -- Bob F EMail FBob@wt.net A Truly Wise Man Never Plays Leapfrog With A Unicorn... -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
On Thu, 16 Mar 2000, you wrote:
On Wed, 15 Mar 2000, George Toft wrote:
Mark B Withers wrote:
Boycot Intel Pentium III <http://www.bigbrotherinside.com/>
[snip]
Many people are concerned about the processor serial number in the Pentium ///, but what about the MAC address inside every NIC? For an interesting walk down Windows Security Lane, head on over to www.grc.com and let him read your MAC address (N/A Linux).
The brief discussion at http://www.bigbrotherinside.com on MAC addresses may have been valid three years ago, but is rapidly becoming obsolete. Cable modems and DSL are more and more commonplace. In my office alone, half of us have cable and the other half are on dial-up ISP's. This indicates half of us (in the U.S.) can be tracked via MAC address regardless of processor.
Fortunatly, my stealth firewall scripts eliminate that little problem. And Linux is spreading one by one as I set up Linux-based firewalls.
-- George Toft http://www.georgetoft.com
Fortunately they are easy to change. A recent thread on FreeBSD -questions list discussed this thoroughly.
www.freebsd.org
My screwup (first one today)! This was discussed recently on BUGTRAQ, not FreeBSD -questions. I subscribe to too many lists........................ Theyallruntogether. -- Bob F EMail FBob@wt.net A Truly Wise Man Never Plays Leapfrog With A Unicorn... -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
participants (3)
-
Anonymous User
-
FBob@wt.net
-
grtoft@yahoo.com