[opensuse] HP Printer PSC1315
Hi, I am trying to make my printer work wit opensuse 10.3. Seems to be detected correctly but there is no PSC 1315 (or 1310 series) in the drivers list. I checked the opensuse site and it says that it is supported. The only "similar" one is PhotoSmart P1315, but I don't think is the same (I tested it just in case and it would work). I have the hplip-hpijs 2.7.7 package. Am I missing something? Also when I try to detect the scanner with the yast utility, it stays in the "Detect USB and SCSI scanners" for ever (well, I actually get tired waiting cause I wouldn't expect to be that long). Thanks in advance for any help. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On 09/29/2007 10:03 AM, Andrés Cosa wrote:
Hi,
I am trying to make my printer work wit opensuse 10.3. Seems to be detected correctly but there is no PSC 1315 (or 1310 series) in the drivers list. I checked the opensuse site and it says that it is supported. The only "similar" one is PhotoSmart P1315, but I don't think is the same (I tested it just in case and it would work).
I have the hplip-hpijs 2.7.7 package. Am I missing something?
Do you have hplip-2.7.7 installed? This would be needed for the PSC. The hpijs is only a printer driver.
Also when I try to detect the scanner with the yast utility, it stays in the "Detect USB and SCSI scanners" for ever (well, I actually get tired waiting cause I wouldn't expect to be that long).
Thanks in advance for any help.
Try after installing hplip and starting hplip service. -- Joe Morris Registered Linux user 231871 running openSUSE 10.2 x86_64 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Andrés Cosa wrote:
Hi,
I am trying to make my printer work wit opensuse 10.3. Seems to be detected correctly but there is no PSC 1315 (or 1310 series) in the drivers list. I checked the opensuse site and it says that it is supported. The only "similar" one is PhotoSmart P1315, but I don't think is the same (I tested it just in case and it would work).
I have the hplip-hpijs 2.7.7 package. Am I missing something?
Also when I try to detect the scanner with the yast utility, it stays in the "Detect USB and SCSI scanners" for ever (well, I actually get tired waiting cause I wouldn't expect to be that long).
Thanks in advance for any help.
I hate to be negative. But [ always one of these in a sentence like this ], I had a PSC1315 and I never could get it to work. The PSC2350 works like a charm "right out of the box". If you can, upgrade is the best advice I can give you. -- (o:]>*HUGGLES*<[:o) Billie Walsh The three best words in the English Language: "I LOVE YOU" Pass them on! -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On 09/29/2007 10:55 AM, Billie Walsh wrote:
Andrés Cosa wrote:
Hi,
I am trying to make my printer work wit opensuse 10.3. Seems to be detected correctly but there is no PSC 1315 (or 1310 series) in the drivers list. I checked the opensuse site and it says that it is supported. The only "similar" one is PhotoSmart P1315, but I don't think is the same (I tested it just in case and it would work). It is supported, but only by installing hplip (HP Linux Imaging and Printing).
I have the hplip-hpijs 2.7.7 package. Am I missing something?
Also when I try to detect the scanner with the yast utility, it stays in the "Detect USB and SCSI scanners" for ever (well, I actually get tired waiting cause I wouldn't expect to be that long).
Thanks in advance for any help.
I hate to be negative. But [ always one of these in a sentence like this ], I had a PSC1315 and I never could get it to work. The PSC2350 works like a charm "right out of the box". If you can, upgrade is the best advice I can give you.
According to http://hplip.sourceforge.net/supported_devices/inkjet_aio.html that aio printer has been supported by hplip since version .0.9.5. 2.7.7 should not have any problem, but for support for that printer, hplip is necessary. -- Joe Morris Registered Linux user 231871 running openSUSE 10.2 x86_64 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Indeed, printer works fine. I'll check the scanner and post a message. Thanks! Joe Morris (NTM) wrote:
On 09/29/2007 10:55 AM, Billie Walsh wrote:
Andrés Cosa wrote:
Hi,
I am trying to make my printer work wit opensuse 10.3. Seems to be detected correctly but there is no PSC 1315 (or 1310 series) in the drivers list. I checked the opensuse site and it says that it is supported. The only "similar" one is PhotoSmart P1315, but I don't think is the same (I tested it just in case and it would work).
It is supported, but only by installing hplip (HP Linux Imaging and Printing).
I have the hplip-hpijs 2.7.7 package. Am I missing something?
Also when I try to detect the scanner with the yast utility, it stays in the "Detect USB and SCSI scanners" for ever (well, I actually get tired waiting cause I wouldn't expect to be that long).
Thanks in advance for any help.
I hate to be negative. But [ always one of these in a sentence like this ], I had a PSC1315 and I never could get it to work. The PSC2350 works like a charm "right out of the box". If you can, upgrade is the best advice I can give you.
According to http://hplip.sourceforge.net/supported_devices/inkjet_aio.html that aio printer has been supported by hplip since version .0.9.5. 2.7.7 should not have any problem, but for support for that printer, hplip is necessary.
-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Fri, 2007-28-09 at 21:55 -0500, Billie Walsh wrote:
Andrés Cosa wrote:
Hi,
I am trying to make my printer work wit opensuse 10.3. Seems to be detected correctly but there is no PSC 1315 (or 1310 series) in the drivers list. I checked the opensuse site and it says that it is supported. The only "similar" one is PhotoSmart P1315, but I don't think is the same (I tested it just in case and it would work).
I have the hplip-hpijs 2.7.7 package. Am I missing something?
Also when I try to detect the scanner with the yast utility, it stays in the "Detect USB and SCSI scanners" for ever (well, I actually get tired waiting cause I wouldn't expect to be that long).
Thanks in advance for any help.
I hate to be negative. But [ always one of these in a sentence like this ], I had a PSC1315 and I never could get it to work. The PSC2350 works like a charm "right out of the box". If you can, upgrade is the best advice I can give you.
I set up a PSC 1315 for my brother no sweat under 10.2, in fact it set itself up, the OP needs to make sure the latest hp-lip package is installed, and use the hp=setup utility if 10.3 beta is not finding this unit. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Hello, On Sep 29 10:03 Andrés Cosa wrote (shortened):
... when I try to detect the scanner with the yast utility, it stays in the "Detect USB and SCSI scanners" for ever (well, I actually get tired waiting cause I wouldn't expect to be that long).
I am interested in this particular problem. When YaST does "Detect USB and SCSI scanners" it runs the script /usr/lib/YaST2/bin/autodetect_scanners Basically /usr/lib/YaST2/bin/autodetect_scanners runs "sane-find-scanner -q" in the background and waits 10 seconds that it finished and if not it kills it. Therefore from my point of view it cannot happen that YaST hangs for ever at "Detect USB and SCSI scanners". What does "sane-find-scanner -q" result on your system? Usually it should result nothing because scanners in HP all-in-one devices cannot be detected with sane-find-scanner (see the YaST help text). If "sane-find-scanner -q" results something on your system, please post the result on this mailing list. Could you activate the 'set -x' line (i.e. remove the '#' character from the '#set -x' line) in /usr/lib/YaST2/bin/autodetect_scanners and then run it as root as follows: /usr/lib/YaST2/bin/autodetect_scanners &>/tmp/autodetect_scanners.out Then post the content of /tmp/autodetect_scanners.out on this mailing list. Kind Regards Johannes Meixner -- SUSE LINUX Products GmbH, Maxfeldstrasse 5, 90409 Nuernberg, Germany AG Nuernberg, HRB 16746, GF: Markus Rex
participants (5)
-
Andrés Cosa -
Billie Walsh -
Joe Morris (NTM) -
Johannes Meixner -
Mike McMullin