![](https://seccdn.libravatar.org/avatar/0d8243e2164e041a0dba4a00de6fa10f.jpg?s=120&d=mm&r=g)
Hello, I tried yesterday to install OpenSuSE10-Beta on my box. First I found a problem with parted. This program was not able to read the partition-table of my pc. I am not able to put a new partition on hdb. I had to do this with Yast/parted from 9.3 (on the same box). Later - after the first installation of 10.0 on the box - there are problems with grub (from 10.0). I am not able to start 9.3 again and run into a kernel-panic short after the start (root-partition of 9.3). I tried to fix this problem with the repair-modus of 9.3. But there was no change. I run again in this trouble. Only a full update of 9.3 with installing grub of this distri fixed the problem. I think, OpenSuSE had made some changes on the root-partition of 9.3 or there are a problem with grub (10.0). My box is a AMD64-3000 with two harddisks, 512MB Memory, Asus K8N-Board. --------snipp --------------------------------------------------- Fstab of 9.3: /dev/hda2 / ext3 acl,user_xattr 1 1 /dev/hda3 /boot ext3 acl,user_xattr 1 2 /dev/hdb12 /data1 auto noauto,user 0 0 /dev/hdb13 /data2 auto noauto,user 0 0 /dev/hdb14 /data3 auto noauto,user 0 0 /dev/hdb15 /data4 auto noauto,user 0 0 /dev/hdb16 /data5 auto noauto,user 0 0 /dev/hdb6 /home ext3 defaults 1 2 /dev/hda9 /local ext3 defaults 1 2 /dev/hdb8 /local2 ext3 defaults 1 2 /dev/hdb11 /local3 ext3 defaults 1 2 /dev/hdb5 /opt ext3 acl,user_xattr 1 2 /dev/hdb10 /usr ext3 acl,user_xattr 1 2 /dev/hda8 /var ext3 acl,user_xattr 1 2 /dev/hda1 /windows/C ntfs ro,users,gid=users,umask=0002,nls=utf8 0 0 /dev/hda5 /windows/D vfat users,gid=users,umask=0002,utf8=true 0 0 /dev/hda6 /windows/E vfat users,gid=users,umask=0002,utf8=true 0 0 /dev/hdb7 /work ext3 defaults 1 2 /dev/hda7 swap swap pri=42 0 0 /dev/hdb9 swap swap pri=42 0 0 devpts /dev/pts devpts mode=0620,gid=5 0 0 proc /proc proc defaults 0 0 usbfs /proc/bus/usb usbfs noauto 0 0 sysfs /sys sysfs noauto 0 0 /dev/cdrecorder /media/cdrecorder subfs noauto,fs=cdfss,ro,procuid,nosuid,nodev,exec,iocharset=utf8 0 0 /dev/dvd /media/dvd subfs noauto,fs=cdfss,ro,procuid,nosuid,nodev,exec,iocharset=utf8 0 0 /dev/fd0 /media/floppy subfs noauto,fs=floppyfss,procuid,nodev,nosuid,sync 0 0 /dev/hdb17 /data6 auto noauto,user 0 0 -----------------------snap -------------------------------------- On the partition with data 1 - 5 are a SuSE 9.2. On /dev/hdb17 I installed OpenSuSE. Any hints? Should I put some more information to this thread? Regards, Andreas -- ## Content Developer OpenOffice.org: lang/DE ## Freie Office-Suite für Linux, Mac, Windows, Solaris ## http://de.openoffice.org ## Meine Seite http://www.amantke.de
![](https://seccdn.libravatar.org/avatar/0d8243e2164e041a0dba4a00de6fa10f.jpg?s=120&d=mm&r=g)
Hello, I will put some more information to this thread: grub from 10.0 (menu.lst): # Modified by YaST2. Last modification on Di Aug 16 20:17:17 UTC 2005 color white/blue black/light-gray default 0 timeout 8 gfxmenu (hd1,16)/boot/message ###Don't change this comment - YaST2 identifier: Original name: linux### title SUSE LINUX 10.0 root (hd1,16) kernel /boot/vmlinuz root=/dev/hdb17 vga=0x317 selinux=0 splash=silent resume=/dev/hdb9 splash=silent showopts initrd /boot/initrd ###Don't change this comment - YaST2 identifier: Original name: SUSE LINUX 9.3 (/dev/hda3)### title SUSE LINUX 9.3 (/dev/hda3) kernel (hd0,2)/vmlinuz root=/dev/hda2 vga=0x317 selinux=0 splash=silent console=tty0 resume=/dev/hdb9 showopts (...) -------------end of menu.lst (10.0) ---------------------- The menu-list of 9.3: ###Don't change this comment - YaST2 identifier: Original name: linux### title SUSE LINUX 9.3 kernel (hd0,2)/vmlinuz root=/dev/hda2 vga=0x317 selinux=0 splash=silent console=tty0 resume=/dev/hdb9 showopts initrd (hd0,2)/initrd ----------------------------------- Are there any hints, why I run into the trouble (kernel-panic)? Regards, Andreas -- ## Content Developer OpenOffice.org: lang/DE ## Freie Office-Suite für Linux, Mac, Windows, Solaris ## http://de.openoffice.org ## Meine Seite http://www.amantke.de
![](https://seccdn.libravatar.org/avatar/e76779f0629280df6d2dfce07e4e1600.jpg?s=120&d=mm&r=g)
Hello, Am Mittwoch, 17. August 2005 20:05 schrieb Andreas Mantke: [...]
Are there any hints, why I run into the trouble (kernel-panic)?
I don't think so as long as you don't tell us the reason for the kernel panic. What error messages do you see? Do you use beta1 or beta2? I remember some grub related reports in beta1 (not all fixed yet), so please search for them on https://bugzilla.novell.com If you have the YaST logs from the installation and your problem isn't in bugzilla yet, open a bugreport and append them. (If you don't have the logs, boot from CD again, try to reproduce the parted problem and, if "successful", save the y2logs [Shift-F8 IIRC]) Regards, Christian Boltz -- 2.-5.9.2005: Weinfest in Insheim Bei der Landjugend: Liquid, AH-Band und Deafen Goblins Mehr Infos: www.Landjugend-Insheim.de
![](https://seccdn.libravatar.org/avatar/0d8243e2164e041a0dba4a00de6fa10f.jpg?s=120&d=mm&r=g)
Hello, Am Donnerstag, 18. August 2005 01:18 schrieb Christian Boltz:
Hello,
Am Mittwoch, 17. August 2005 20:05 schrieb Andreas Mantke: [...]
Are there any hints, why I run into the trouble (kernel-panic)?
I don't think so as long as you don't tell us the reason for the kernel panic. What error messages do you see?
my problem is, that I had no screenshot or output of this kernel-panic. I remember only that it stops by reading the boot-partition of 9.3.
Do you use beta1 or beta2?
Beta 1.
I remember some grub related reports in beta1 (not all fixed yet), so please search for them on https://bugzilla.novell.com
I had a look to bugzilla. There are three bugs with parted; also with beta2.
If you have the YaST logs from the installation and your problem isn't in bugzilla yet, open a bugreport and append them. (If you don't have the logs, boot from CD again, try to reproduce the parted problem and, if "successful", save the y2logs [Shift-F8 IIRC])
I had submitted a bugreport and the yast2log of my installation from tuesday: Bug 105612. Regards, Andreas -- ## Content Developer OpenOffice.org: lang/DE ## Freie Office-Suite für Linux, Mac, Windows, Solaris ## http://de.openoffice.org ## Meine Seite http://www.amantke.de
participants (2)
-
Andreas Mantke
-
Christian Boltz