Netmod modem by Intracom ubable to connect
Hi, I have a problem with Suse 8 and my modem. I have a ISDN terminal produced in grecee, with come whit a internal modem, called Intracom NetMod . Suse 8 detect the modem ok, all the other settings are OK, but when I try to connect on the net I receive a error about "bad initialization string". So, any ideea how to fix that ? For writing this message I was obligated to install again Windows ...... here are the errors SuSE Meta pppd (smpppd), Version 0.73 on linux. wwwoffle not is running Selection of interface/provider "ppp1"/"DirectNet" succeeded. Reloading configuration. Reloading interfaces and providers. No interface configured. Use YaST2 to configure. Reloading configuration. Reloading interfaces and providers. Selection of interface/provider "ppp0"/"DirectNet" succeeded. Starting connection. (2002-06-26 22:21:02 EEST) pppd: Plugin passwordfd.so loaded. pppd: Perms of /dev/ttyS1 are ok, no 'mesg n' neccesary. pppd: --> WvDial: Internet dialer version 1.42 pppd: --> Initializing modem. pppd: --> Sending: ATB40 pppd: ATB40 pppd: OK pppd: --> Sending: AT Q0 V1 E1 S0=0 &C1 +FCLASS=0 pppd: AT Q0 V1 E1 S0=0 &C1 +FCLASS=0 pppd: --> Sending: ATQ0 pppd: ATQ0 pppd: ERROR pppd: --> Re-Sending: AT Q0 V1 E1 S0=0 &C1 +FCLASS=0 pppd: AT Q0 V1 E1 S0=0 &C1 +FCLASS=0 pppd: --> Modem not responding. pppd: Connect script failed pppd died: Connect script failed (exit code 8)
Hi , I have also ISDN in my home. The string "AT Q0 V1 E1 S0=0 &C1 +FCLASS=0" is not correct. Try to put "AT&C1" only or don't put anything . I will look the string i use at my home and i send you the correct. On Wednesday 26 June 2002 12:39, primariatalmaciu wrote:
Hi, I have a problem with Suse 8 and my modem. I have a ISDN terminal produced in grecee, with come whit a internal modem, called Intracom NetMod . Suse 8 detect the modem ok, all the other settings are OK, but when I try to connect on the net I receive a error about "bad initialization string". So, any ideea how to fix that ? For writing this message I was obligated to install again Windows ......
here are the errors SuSE Meta pppd (smpppd), Version 0.73 on linux.
wwwoffle not is running
Selection of interface/provider "ppp1"/"DirectNet" succeeded.
Reloading configuration.
Reloading interfaces and providers.
No interface configured. Use YaST2 to configure.
Reloading configuration.
Reloading interfaces and providers.
Selection of interface/provider "ppp0"/"DirectNet" succeeded.
Starting connection. (2002-06-26 22:21:02 EEST)
pppd: Plugin passwordfd.so loaded.
pppd: Perms of /dev/ttyS1 are ok, no 'mesg n' neccesary.
pppd: --> WvDial: Internet dialer version 1.42
pppd: --> Initializing modem.
pppd: --> Sending: ATB40
pppd: ATB40
pppd: OK
pppd: --> Sending: AT Q0 V1 E1 S0=0 &C1 +FCLASS=0
pppd: AT Q0 V1 E1 S0=0 &C1 +FCLASS=0
pppd: --> Sending: ATQ0
pppd: ATQ0
pppd: ERROR
pppd: --> Re-Sending: AT Q0 V1 E1 S0=0 &C1 +FCLASS=0
pppd: AT Q0 V1 E1 S0=0 &C1 +FCLASS=0
pppd: --> Modem not responding.
pppd: Connect script failed
pppd died: Connect script failed (exit code 8)
-- Best regards ******************************** Nick Katsamas e-Mail: nkat@forthnet.gr OS: SuSE Linux v7.3 Kernel: 2.4.18 XFree: 4.2.0 ********************************
Hi ,
I have also ISDN in my home. The string "AT Q0 V1 E1 S0=0 &C1 +FCLASS=0" is not correct. Try to put "AT&C1" only or don't put anything . I will look
string i use at my home and i send you the correct.
On Wednesday 26 June 2002 12:39, primariatalmaciu wrote:
Hi, I have a problem with Suse 8 and my modem. I have a ISDN terminal produced in grecee, with come whit a internal modem, called Intracom NetMod . Suse 8 detect the modem ok, all the other settings are OK, but when I
TANKS, i USE SUSE 8 AND i NEED TO GO ON THE NET ..... I WAIT FOR YOUR STRING ----- Original Message ----- From: "Nick Katsamas" <nkat@forthnet.gr> To: "primariatalmaciu" <primariatalmaciu@directnet.ro>; <suse-linux-e@suse.com> Sent: Wednesday, June 26, 2002 12:51 PM Subject: Re: [SLE] Netmod modem by Intracom ubable to connect the try
to connect on the net I receive a error about "bad initialization string". So, any ideea how to fix that ? For writing this message I was obligated to install again Windows ......
here are the errors SuSE Meta pppd (smpppd), Version 0.73 on linux.
wwwoffle not is running
Selection of interface/provider "ppp1"/"DirectNet" succeeded.
Reloading configuration.
Reloading interfaces and providers.
No interface configured. Use YaST2 to configure.
Reloading configuration.
Reloading interfaces and providers.
Selection of interface/provider "ppp0"/"DirectNet" succeeded.
Starting connection. (2002-06-26 22:21:02 EEST)
pppd: Plugin passwordfd.so loaded.
pppd: Perms of /dev/ttyS1 are ok, no 'mesg n' neccesary.
pppd: --> WvDial: Internet dialer version 1.42
pppd: --> Initializing modem.
pppd: --> Sending: ATB40
pppd: ATB40
pppd: OK
pppd: --> Sending: AT Q0 V1 E1 S0=0 &C1 +FCLASS=0
pppd: AT Q0 V1 E1 S0=0 &C1 +FCLASS=0
pppd: --> Sending: ATQ0
pppd: ATQ0
pppd: ERROR
pppd: --> Re-Sending: AT Q0 V1 E1 S0=0 &C1 +FCLASS=0
pppd: AT Q0 V1 E1 S0=0 &C1 +FCLASS=0
pppd: --> Modem not responding.
pppd: Connect script failed
pppd died: Connect script failed (exit code 8)
-- Best regards ******************************** Nick Katsamas e-Mail: nkat@forthnet.gr OS: SuSE Linux v7.3 Kernel: 2.4.18 XFree: 4.2.0 ********************************
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com
Hi, I look My init string from /etc/wvdial.conf and the only init string is: Init1= ATZ Init2= ATB40 Init3= Init8= Init9= ATX3 make the modifications and all sould be ok. -- Best regards ******************************** Nick Katsamas e-Mail: nkat@forthnet.gr OS: SuSE Linux v7.3 Kernel: 2.4.18 XFree: 4.2.0 ********************************
participants (2)
-
Nick Katsamas -
primariatalmaciu