ADSL configuration problem: Waiting for PADO - Please check your setup and try again
Hi there, I really need some help on my ADSL connection with SuSE8.0. Problem is: when I try to connect, KInternet log gives: pppd: Sending PADI and then: Waiting for PADO. Please check your setup and try again. On Win2k the ADSl connection is working alright (with the same cables). I use an Alcatel Speedtouch 510 ADSL modem and a Realtek RTL8139 Ethernet Adapter, my pppd version is 2.4.1, kernel version is 2.4.18-4GB. Service provider is Tiscali in Holland. I have to use PPPoE. First I tried to use the YAST2 setup. I can ping the modem. According to Tiscali I should set the Network Adapter to 10MBit/half duplex. If I dmesg |grep eth0: 'eth0: RealTek TRL8139 Fast Ethernet at 0xe4da8000 00:40:f4:2e:2f:0a, IRQ 5 eth0: Identified 8139 chip type 'RTL-8139C' eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1. eth0: no IPv6 routers present' However, when I use mii-tool the output is: 'eth0: 10 MBit, half duplex, no link' So I assume the bandwidth is automatically set correct, although I do not quite understand why dmesg is giving the above message. What does 'no link' mean, should I have a link? There is one LED burning at the adapter, and I can ping the ADSL modem so I expect the adapter is okay (?) I tried putting 'options rtl8139 options=0x40' (i.e. 10 MBit/half duplex) in /etc/modules.conf but then the network adapter fails in the boot process. I tried configuring the /etc/modules.conf and /etc/ppp/options according to http://www.adsl4linux.de/howtos/ but when I come to testing 'pppd eth0' I get: 'Sending PADI' and nothing happens anymore. I tried disabling the SuSEfirewall2 (and enabling the personal firewall) by renaming the three SuSEfirewall2 files in the init.d directory. I still got: 'Waiting for PADO. Please check your setup and try again.' I tried using the RP-PPPoE program instead of the kernel facility. No result: again a 'timed out' message. If anybody has any suggestions how to solve this problem, I would be eternally grateful!!! Thanks, regards, Han Rauwerda
Typically adsl modem is also a router, especially when
you connect to it via ethernet. Alcatel Speedtouch 510
should be adsl modem/router so you don't need to run
ppp on Linux box, it would be your adsl modem/router
job. It should be enough to setup default gateway on
your Linux box pointing to adsl modem/router or even
better let dhcp to take care of it dynamically.
Martin
--- Han Rauwerda
Hi there,
I really need some help on my ADSL connection with SuSE8.0.
Problem is: when I try to connect, KInternet log gives: pppd: Sending PADI and then: Waiting for PADO. Please check your setup and try again.
On Win2k the ADSl connection is working alright (with the same cables). I use an Alcatel Speedtouch 510 ADSL modem and a Realtek RTL8139 Ethernet Adapter, my pppd version is 2.4.1, kernel version is 2.4.18-4GB. Service provider is Tiscali in Holland. I have to use PPPoE.
First I tried to use the YAST2 setup. I can ping the modem.
According to Tiscali I should set the Network Adapter to 10MBit/half duplex. If I dmesg |grep eth0: 'eth0: RealTek TRL8139 Fast Ethernet at 0xe4da8000 00:40:f4:2e:2f:0a, IRQ 5 eth0: Identified 8139 chip type 'RTL-8139C' eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1. eth0: no IPv6 routers present'
However, when I use mii-tool the output is: 'eth0: 10 MBit, half duplex, no link'
So I assume the bandwidth is automatically set correct, although I do not quite understand why dmesg is giving the above message. What does 'no link' mean, should I have a link? There is one LED burning at the adapter, and I can ping the ADSL modem so I expect the adapter is okay (?)
I tried putting 'options rtl8139 options=0x40' (i.e. 10 MBit/half duplex) in /etc/modules.conf but then the network adapter fails in the boot process.
I tried configuring the /etc/modules.conf and /etc/ppp/options according to http://www.adsl4linux.de/howtos/ but when I come to testing 'pppd eth0' I get: 'Sending PADI' and nothing happens anymore.
I tried disabling the SuSEfirewall2 (and enabling the personal firewall) by renaming the three SuSEfirewall2 files in the init.d directory. I still got: 'Waiting for PADO. Please check your setup and try again.'
I tried using the RP-PPPoE program instead of the kernel facility. No result: again a 'timed out' message.
If anybody has any suggestions how to solve this problem, I would be eternally grateful!!!
Thanks, regards, Han Rauwerda
-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
__________________________________ Do you Yahoo!? SBC Yahoo! DSL - Now only $29.95 per month! http://sbc.yahoo.com
On Sunday 15 June 2003 00:04, Han Rauwerda wrote:
Hi there,
I really need some help on my ADSL connection with SuSE8.0.
Problem is: when I try to connect, KInternet log gives: pppd: Sending PADI and then: Waiting for PADO. Please check your setup and try again.
I'm having the same problem with my SuSE 8.1 box and modem IPM Datacom trying to connect to telecom italia. Please help. Fabio.
participants (3)
-
fabio de francesco -
Han Rauwerda -
Martin