[opensuse] Annoying bug / incompatibility with temperature plasmoid in TW.
Hello everybody. I am struggling to understand the following bug/ incompatibility when running temperature monitor plasmoid with TW. https://paste.opensuse.org/view//51764536 Is how it looks like. The monitors for sdd, hdds are working. GPU and CPU no values. Now, when I do a "reload temperature sources it looks like this: https://paste.opensuse.org/view//24347012 The CPU value is low, when under normal usage it is 20 and idle 6 because it is very well cooled. So the values are right, no problem. I tried to shorten refresh times but now luck. Now, strangely enough, there is no way apparently to have it work right from the start. You always have manually to reload the data, once the system runs and then, even only seconds after the boot up, it will run well until shutdown. Hours or days it does not matter. It is surely a minor annoyance, but in precedent version it had the issue with all temp sources. Now "just" with two. I would really like to understand why this is so and if I can fix it. Any idea what goes wrong? _________________________________________________________________ ________________________________________________________ Ihre E-Mail-Postf�cher sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Confirmed in Leap 15. using Plasma from OBS. Am Dienstag, 5. Februar 2019, 11:23:08 CET schrieb stakanov:
Hello everybody. I am struggling to understand the following bug/ incompatibility when running temperature monitor plasmoid with TW.
https://paste.opensuse.org/view//51764536
Is how it looks like. The monitors for sdd, hdds are working. GPU and CPU no values. Now, when I do a "reload temperature sources it looks like this:
https://paste.opensuse.org/view//24347012
The CPU value is low, when under normal usage it is 20 and idle 6 because it is very well cooled. So the values are right, no problem. I tried to shorten refresh times but now luck. Now, strangely enough, there is no way apparently to have it work right from the start. You always have manually to reload the data, once the system runs and then, even only seconds after the boot up, it will run well until shutdown. Hours or days it does not matter. It is surely a minor annoyance, but in precedent version it had the issue with all temp sources. Now "just" with two.
I would really like to understand why this is so and if I can fix it. Any idea what goes wrong?
_________________________________________________________________ ________________________________________________________ Ihre E-Mail-Postf�cher sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de
-- Mathias Homann Senior Systems Engineer, IT Consultant. IT Trainer Mathias.Homann@openSUSE.org http://www.tuxonline.tech gpg key fingerprint: 8029 2240 F4DD 7776 E7D2 C042 6B8E 029E 13F2 C102
In data martedì 5 febbraio 2019 12:14:44 CET, Mathias Homann ha scritto:
Confirmed in Leap 15. using Plasma from OBS.
Am Dienstag, 5. Februar 2019, 11:23:08 CET schrieb stakanov:
Hello everybody. I am struggling to understand the following bug/ incompatibility when running temperature monitor plasmoid with TW.
https://paste.opensuse.org/view//51764536
Is how it looks like. The monitors for sdd, hdds are working. GPU and CPU no values. Now, when I do a "reload temperature sources it looks like this:
https://paste.opensuse.org/view//24347012
The CPU value is low, when under normal usage it is 20 and idle 6 because it is very well cooled. So the values are right, no problem. I tried to shorten refresh times but now luck. Now, strangely enough, there is no way apparently to have it work right from the start. You always have manually to reload the data, once the system runs and then, even only seconds after the boot up, it will run well until shutdown. Hours or days it does not matter. It is surely a minor annoyance, but in precedent version it had the issue with all temp sources. Now "just" with two.
I would really like to understand why this is so and if I can fix it. Any idea what goes wrong?
_________________________________________________________________ ________________________________________________________ Ihre E-Mail-Postf�cher sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de Hi Mathias. So no action needed, I can consider this "cared of"?
Or should I raise a report? Thank you. _________________________________________________________________ ________________________________________________________ Ihre E-Mail-Postf�cher sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Am Dienstag, 5. Februar 2019, 16:33:39 CET schrieb stakanov:
In data martedì 5 febbraio 2019 12:14:44 CET, Mathias Homann ha scritto:
Confirmed in Leap 15. using Plasma from OBS.
Am Dienstag, 5. Februar 2019, 11:23:08 CET schrieb stakanov:
Hello everybody. I am struggling to understand the following bug/ incompatibility when running temperature monitor plasmoid with TW.
https://paste.opensuse.org/view//51764536
Is how it looks like. The monitors for sdd, hdds are working. GPU and CPU no values. Now, when I do a "reload temperature sources it looks like this:
https://paste.opensuse.org/view//24347012
The CPU value is low, when under normal usage it is 20 and idle 6 because it is very well cooled. So the values are right, no problem. I tried to shorten refresh times but now luck. Now, strangely enough, there is no way apparently to have it work right from the start. You always have manually to reload the data, once the system runs and then, even only seconds after the boot up, it will run well until shutdown. Hours or days it does not matter. It is surely a minor annoyance, but in precedent version it had the issue with all temp sources. Now "just" with two.
I would really like to understand why this is so and if I can fix it. Any idea what goes wrong?
_________________________________________________________________ ________________________________________________________ Ihre E-Mail-Postf�cher sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de
Hi Mathias. So no action needed, I can consider this "cared of"?
please do a report. Cheers MH
In data martedì 5 febbraio 2019 17:18:07 CET, Mathias Homann ha scritto:
Am Dienstag, 5. Februar 2019, 16:33:39 CET schrieb stakanov:
In data martedì 5 febbraio 2019 12:14:44 CET, Mathias Homann ha scritto:
Confirmed in Leap 15. using Plasma from OBS.
Am Dienstag, 5. Februar 2019, 11:23:08 CET schrieb stakanov:
Hello everybody. I am struggling to understand the following bug/ incompatibility when running temperature monitor plasmoid with TW.
https://paste.opensuse.org/view//51764536
Is how it looks like. The monitors for sdd, hdds are working. GPU and CPU no values. Now, when I do a "reload temperature sources it looks like this:
https://paste.opensuse.org/view//24347012
The CPU value is low, when under normal usage it is 20 and idle 6 because it is very well cooled. So the values are right, no problem. I tried to shorten refresh times but now luck. Now, strangely enough, there is no way apparently to have it work right from the start. You always have manually to reload the data, once the system runs and then, even only seconds after the boot up, it will run well until shutdown. Hours or days it does not matter. It is surely a minor annoyance, but in precedent version it had the issue with all temp sources. Now "just" with two.
I would really like to understand why this is so and if I can fix it. Any idea what goes wrong?
_________________________________________________________________ ________________________________________________________ Ihre E-Mail-Postf�cher sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de
Hi Mathias. So no action needed, I can consider this "cared of"?
please do a report.
Cheers MH Thanks, done with Bug 1124363
_________________________________________________________________ ________________________________________________________ Ihre E-Mail-Postf�cher sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
participants (2)
-
Mathias Homann -
stakanov