[opensuse] 10.2 fails to auto-power-off; 10.1 was ok. bug or misconfiguration?
i've successfully updated my 10.1 box to 10.2. on 10.1, when i, shutdown -h now the box halted services then powered-off automatically. on 10.2 all services etc are 'halted', but i only get as far as, ... skipped services in runlevel 0: nfs stty: shutdown input: unable to perform all requested operations and the system hangs there. poweroff further requires me to push/toggle the power button. again, this is *different* behavior that the same box/setup with opensuse 10.1. googling, my suspicion is this may be related to acpi/apm, but i'm not certain. lots of questions raised online, but no definitive answers that i've found. given that ACPI/APM is an "either-or" *not* 'both' selection, i've setup my box as, /root# cat /boot/grub/menu.lst # Modified by YaST2. Last modification on Sun Dec 10 21:57:03 PST 2006 default 0 timeout 8 gfxmenu (hd0,0)/message title OpenSuSE 10.2 root (hd0,0) kernel /vmlinuz-2.6.18.2-34-default root=/dev/hda3 resume=/dev/hda2 apm=on acpi=off splash=silent showopts elevator= initrd /initrd-2.6.18.2-34-default title Failsafe -- OpenSuSE 10.2 root (hd0,0) kernel /vmlinuz-2.6.18.2-34-default root=/dev/hda3 showopts ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off 3 initrd /initrd-2.6.18.2-34-default /root# dmesg | grep apm Kernel command line: root=/dev/hda3 resume=/dev/hda2 apm=on acpi=off splash=silent elevator= apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) /root# dmesg | grep acpi Kernel command line: root=/dev/hda3 resume=/dev/hda2 apm=on acpi=off splash=silent elevator= /root# ps ax | grep apm 51 ? S 0:00 [kapmd] 3091 ? Ss 0:00 /usr/sbin/apmd -w 10 -P /usr/sbin/apmd_proxy 3617 pts/1 S+ 0:00 grep apm /root# ps ax | grep acpi 3619 pts/1 R+ 0:00 grep acpi /root# -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
snowcrash+opensuse wrote:
shutdown -h now
on 10.2 all services etc are 'halted', but i only get as far as,
... skipped services in runlevel 0: nfs stty: shutdown input: unable to perform all requested operations
and the system hangs there. poweroff further requires me to push/toggle the power button. You might try apm=realmode_power_off on the command line. At one point I needed that for mine to power off, don't remember now the reasons.
-- Joe Morris Registered Linux user 231871 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
You might try apm=realmode_power_off on the command line. At one point I needed that for mine to power off, don't remember now the reasons.
i note others online have tried the same cmd string. i've now tried all of, ... apm=on acpi=off ... apm=on apm=realmode_power_off acpi=off ... apm=realmode_power_off acpi=off as grub/menu.lst options. same behavior in each case. still no auto-power-off. :-( thanks. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
participants (2)
-
Joe Morris (NTM)
-
snowcrash+opensuse