Hi I am using Konqueror from KDE 2.2.1 on SuSE 7.3 and mainly its great. However I do a lot of work with Cisco kit and it has major problems with their web site. If you load a big html document as you read down it the fonts get bigger and bigger and bigger until there is only maybe one or two words line (at 1024x768 !!!). The following url demonstrates the problem, you will have to page down to at least a quarter of the way through it before it gets really bad. Does anyone else get the same thing ? http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/78_1330... Pat -- ----------------------------------- Pat Colbeck E-mail: pcolbeck@bashq.org Tel: I'm not telling -----------------------------------
Yep, I've seen that beheaviour before. I'm running the KDE3 beta1 and it is fixed :-) now. Nash On Thursday 20 December 2001 16:35, you wrote:
Hi
I am using Konqueror from KDE 2.2.1 on SuSE 7.3 and mainly its great. However I do a lot of work with Cisco kit and it has major problems with their web site. If you load a big html document as you read down it the fonts get bigger and bigger and bigger until there is only maybe one or two words line (at 1024x768 !!!). The following url demonstrates the problem, you will have to page down to at least a quarter of the way through it before it gets really bad. Does anyone else get the same thing ?
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/78_133 08.htm
Pat
If you have the problem I think you have, a possible workaround would be to
open Konq, click Settings->Settings...->Appearance, then choose either
iso8859-1 or iso8859-15 (or whatver your preferred charset) then click
Enforce default charset encoding at the bottom of the dialog. Try to read
the page again. If you don't have the problem I think you have, never mind.
John
----- Original Message -----
From: "Pat Colbeck"
Hi
I am using Konqueror from KDE 2.2.1 on SuSE 7.3 and mainly its great. However I do a lot of work with Cisco kit and it has major problems with their web site. If you load a big html document as you read down it the fonts get bigger and bigger and bigger until there is only maybe one or two words line (at 1024x768 !!!). The following url demonstrates the problem, you will have to page down to at least a quarter of the way through it before it gets really bad. Does anyone else get the same thing ?
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/78_1330 8.htm
Pat -- ----------------------------------- Pat Colbeck
----- Original Message ----- From: "Pat Colbeck"
To: Sent: Thursday, December 20, 2001 4:35 PM Subject: [SLE] Konqueror weird font behavior Hi
I am using Konqueror from KDE 2.2.1 on SuSE 7.3 and mainly its great. However I do a lot of work with Cisco kit and it has major problems with their web site. If you load a big html document as you read down it the fonts get bigger and bigger and bigger until there is only maybe one or two words line (at 1024x768 !!!). The following url demonstrates the problem, you will have to page down to at least a quarter of the way through it before it gets really bad. Does anyone else get the same thing ?
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/78_1330 8.htm
I checked the web page with Konqueror 2.2.2 (an upgrade from SuSE's web site). There was no problem. My Konqueror fonts are configured as follows: Minimum font size: 9 Medium font size: 10 Charset: iso8859-1 Standard: helvetica Fixed: adobe-courier Serif: times Sans Serif: helvetica Cursive: helvetica Fantasy: helvetica Font size adjustment: 0 Default Encoding: Use language encoding Enforce default Encoding charset is OFF -- ____________________________________________________________________ Robert Paulsen paulsen@texas.net
Hi to All, Help required ! I'm trying to setup Virtual Domain's in SuSE Email III. It works fine, but the problem is as follows, Example: There are 3 Domain Names with user "sales". The mails of one domain should be independent of other domains. That is, sales@first-domain.com sales@second-domain.com sales@third-domain.com Currently Copies of Emails "sales@first-domain.com" is also received by "sales@second-domain.com" and "sales@third-domain.com". I also tried editing the file /etc/postfix/virtual & rebuilt the database with postfix reload. It does not seem to work. Help ! Thank you in advance, Mahesh Pillari
participants (5)
-
John Scott
-
mahesh pillari
-
Nash Hoogwater
-
Pat Colbeck
-
Robert C. Paulsen Jr.