===== Original Message From suse-linux-e@suse.com ===== Hi,
RR> I'd love to get my Canon G2 working with Linux. I'm yet to find a simple RR> dummies guide to "Here are the first things to do to using your digital RR> camera under linux." (I'm using suse 8.1, Kde 3.0.5).
Did you try to mount it as a usb-mass-storage-device? (I think the cam is usb?) Just plug the activated camera in the usb-connector when the system is running with usb-support active. Then look if 'dmesg' tells you something about a new mass storage device (e.g. /dev/sdc1) or something like that . Then just mount it, with 'mount /dev/xxx /mnt' where xxx is the dev showed by the dmesg-command. If that works for your camera (I don't tried your one) the files should be available under /mnt.
Bye.
I had the same problem but could not get an answere from the list. I tried these suggestions and when i looked at the dmesg I got this for my usb device usb.c: USB disconnect on device 2 hub.c: USB new device connect on bus1/2, assigned device number 3 usb.c: USB device 3 (vend/prod 0x8086/0x630) is not claimed by any active driver
-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
On Saturday 21 December 2002 22:26, harry302 wrote:
I tried these suggestions and when i looked at the dmesg I got this for my usb device
usb.c: USB disconnect on device 2 hub.c: USB new device connect on bus1/2, assigned device number 3 usb.c: USB device 3 (vend/prod 0x8086/0x630) is not claimed by any active driver
I got this todat testing a friend's cam - it generally means that the camera is not usb-mass-storage compliant and hence needs proprietry software. Dylan
-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
-- "Sweet moderation Heart of this nation Desert us not, we are Between the wars"
On Sat, 21 Dec 2002 22:36:38 +0000
Dylan
On Saturday 21 December 2002 22:26, harry302 wrote:
I tried these suggestions and when i looked at the dmesg I got this for my usb device
usb.c: USB disconnect on device 2 hub.c: USB new device connect on bus1/2, assigned device number 3 usb.c: USB device 3 (vend/prod 0x8086/0x630) is not claimed by any active driver
I got this todat testing a friend's cam - it generally means that the camera is not usb-mass-storage compliant and hence needs proprietry software.
I get a similar display from my canon g2. I'm confused though since the libgphoto2 stuff says it supports the canon g2? Do different versions of Linux work with digital cameras to the point that some versions will work with it and some will not? -- Rick
On Sunday 22 December 2002 02:04, Rick Reumann wrote:
On Sat, 21 Dec 2002 22:36:38 +0000
Dylan
wrote: On Saturday 21 December 2002 22:26, harry302 wrote:
I tried these suggestions and when i looked at the dmesg I got this for my usb device
usb.c: USB disconnect on device 2 hub.c: USB new device connect on bus1/2, assigned device number 3 usb.c: USB device 3 (vend/prod 0x8086/0x630) is not claimed by any active driver
I got this todat testing a friend's cam - it generally means that the camera is not usb-mass-storage compliant and hence needs proprietry software.
I get a similar display from my canon g2. I'm confused though since the libgphoto2 stuff says it supports the canon g2?
I can't say, I'm afraid, because my camera turns up as a mountable filesystem...
Do different versions of Linux work with digital cameras to the point that some versions will work with it and some will not?
Well, it's going to depend to some extent on the kernel version... With respect to the kio slave, if it's installed, I believe you use camera: as a protocol prefix in the address, but as to how to make that work? Sorry again :( Dylan -- "Sweet moderation Heart of this nation Desert us not, we are Between the wars"
On Saturday 21 December 2002 17:36, Dylan wrote:
I got this todat testing a friend's cam - it generally means that the camera is not usb-mass-storage compliant and hence needs proprietry software.
If so, get a card reader. *************************************************** Powered by SuSE Linux 8.0 Professional KDE 3.0.0 KMail 1.4 This is a Microsoft-free computer Bryan S. Tyson bryantyson@earthlink.net ***************************************************
* harry302
===== Original Message From suse-linux-e@suse.com ===== Hi,
RR> I'd love to get my Canon G2 working with Linux. I'm yet to find a simple RR> dummies guide to "Here are the first things to do to using your digital RR> camera under linux." (I'm using suse 8.1, Kde 3.0.5).
Did you try to mount it as a usb-mass-storage-device? (I think the cam is usb?) Just plug the activated camera in the usb-connector when the system is running with usb-support active. Then look if 'dmesg' tells you something about a new mass storage device (e.g. /dev/sdc1) or something like that . Then just mount it, with 'mount /dev/xxx /mnt' where xxx is the dev showed by the dmesg-command. If that works for your camera (I don't tried your one) the files should be available under /mnt.
Bye.
I had the same problem but could not get an answere from the list.
I tried these suggestions and when i looked at the dmesg I got this for my usb device
usb.c: USB disconnect on device 2 hub.c: USB new device connect on bus1/2, assigned device number 3 usb.c: USB device 3 (vend/prod 0x8086/0x630) is not claimed by any active driver
try gphoto2, pat@wahoo:~> gphoto2 --list-cameras | grep G2 "Canon PowerShot G2" my son brought his Olympus 3000 over and we hooked it up (usb), ran gphoto2 and had immediate access (SuSE 8.1). -- Patrick Shanahan Registered Linux User #207535 @ http://counter.li.org icq#173753138 http://home.indy.rr.com/paka/
participants (5)
-
Bryan Tyson
-
Dylan
-
harry302
-
Rick Reumann
-
SuSEnixER