RE: [SLE] Big Problem on APM in kernel
Hi, -----Original Message----- From: Syeh Abidin [SMTP:Syehabidin@Telkom.net] Sent: Wednesday, May 03, 2000 8:24 AM
Hi, I have find all my configuration file to make my computer (ATX) can power off in Halt But I know now the problem, The Kernel has no APM Support.. I know it in #make menuconfig, no check box in APM (advanced power management) and in Power Off too.. in /proc there is no file apm, this mean has no APM Support
Does anybody know how to compile it to produce file apm in /proc ?? Your help is very needed, My COmpuer still can't poweroff..
If linux is shutdown you should be able to turn off the power by holding the power button down (about 5 or 6 seconds). Usually this is configurable in the bios so you should have the option to change it to power off without the delay. As far as apm goes, the best I can do is recommend that you install the apm kernel from the CD (depending on which version you have) since I haven't played with apm or looked at the options carefully enough to guide you. Tim -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
Hello Tim, Oh Great thank's How I can don't know if can turn off computer by that, Oh I know it now. Thanks For the SuSE Maker, why don't make kernel after instalation with APM support.. ?? most of new computer now with APM Support, user must recompile it..and this difficult one. Any User of SuSE 6.4 or 6.3 is the kernel already support APM without recomple it ?? Wednesday, May 03, 2000, 7:49:08 PM, you wrote: TD> Hi, TD> -----Original Message----- TD> From: Syeh Abidin [SMTP:Syehabidin@Telkom.net] TD> Sent: Wednesday, May 03, 2000 8:24 AM
Hi, I have find all my configuration file to make my computer (ATX) can power off in Halt But I know now the problem, The Kernel has no APM Support.. I know it in #make menuconfig, no check box in APM (advanced power management) and in Power Off too.. in /proc there is no file apm, this mean has no APM Support
Does anybody know how to compile it to produce file apm in /proc ?? Your help is very needed, My COmpuer still can't poweroff..
TD> If linux is shutdown you should be able to turn off the power by holding TD> the power button down (about 5 or 6 seconds). Usually this is TD> configurable in the bios so you should have the option to change it to TD> power off without the delay. TD> As far as apm goes, the best I can do is recommend that you install the TD> apm kernel from the CD (depending on which version you have) since I TD> haven't played with apm or looked at the options carefully enough to TD> guide you. TD> Tim -- Best regards, Syeh mailto:Syehabidin@Telkom.net -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
Syeh Abidin wrote:
Hello Tim,
Oh Great thank's How I can don't know if can turn off computer by that, Oh I know it now. Thanks
For the SuSE Maker, why don't make kernel after instalation with APM support.. ?? most of new computer now with APM Support, user must recompile it..and this difficult one. Any User of SuSE 6.4 or 6.3 is the kernel already support APM without recomple it ??
Wednesday, May 03, 2000, 7:49:08 PM, you wrote:
During the installation you were asked to select a kernel via Yast. All you had to do was select the one marked *.apm. Mark -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
Mark Hounschell wrote:
Syeh Abidin wrote:
Hello Tim,
Oh Great thank's How I can don't know if can turn off computer by that, Oh I know it now. Thanks
For the SuSE Maker, why don't make kernel after instalation with APM support.. ?? most of new computer now with APM Support, user must recompile it..and this difficult one. Any User of SuSE 6.4 or 6.3 is the kernel already support APM without recomple it ??
Wednesday, May 03, 2000, 7:49:08 PM, you wrote:
During the installation you were asked to select a kernel via Yast. All you had to do was select the one marked *.apm.
That should have said for 6.4 SuSE. I don't think the apm supporting kernel was available in 6.3 or less.
Mark
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
Hello Mark, In where ..I isn't asked that when I install it !! Please in where ..? In what section ? Thursday, May 04, 2000, 6:50:38 PM, you wrote: MH> Syeh Abidin wrote:
Hello Tim,
Oh Great thank's How I can don't know if can turn off computer by that, Oh I know it now. Thanks
For the SuSE Maker, why don't make kernel after instalation with APM support.. ?? most of new computer now with APM Support, user must recompile it..and this difficult one. Any User of SuSE 6.4 or 6.3 is the kernel already support APM without recomple it ??
Wednesday, May 03, 2000, 7:49:08 PM, you wrote:
MH> During the installation you were asked to select a kernel via Yast. MH> All you had to do was select the one marked *.apm. MH> Mark -- Best regards, Syeh mailto:Syehabidin@Telkom.net -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
Syeh Abidin wrote:
Hello Mark,
In where ..I isn't asked that when I install it !! Please in where ..? In what section ?
Thursday, May 04, 2000, 6:50:38 PM, you wrote:
MH> Syeh Abidin wrote:
Hello Tim,
Oh Great thank's How I can don't know if can turn off computer by that, Oh I know it now. Thanks
For the SuSE Maker, why don't make kernel after instalation with APM support.. ?? most of new computer now with APM Support, user must recompile it..and this difficult one. Any User of SuSE 6.4 or 6.3 is the kernel already support APM without recomple it ??
Wednesday, May 03, 2000, 7:49:08 PM, you wrote:
MH> During the installation you were asked to select a kernel via Yast. MH> All you had to do was select the one marked *.apm.
MH> Mark
I'm assuming 6.4. If you using yast1 then its under System Admin, Kernel and boot configuration, Select boot kernel. If your using Yast2 I'm not sure because I still use Yast1. During the install no matter whether you used yast1 or yast2 it had to give you a choice of boot kernels. But then again I still use yast1 so what I say about yast2 may be incorrect. Be sure to run lilo after installing a new one. Mark -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
participants (3)
-
dmarkh＠cfl.rr.com -
Syehabidin＠Telkom.net -
tduggan＠dekaresearch.com