CS should be cable select , try it both plugs on the cable , one should be master , the other slave , make sure the other drive is se to slave . if they dont work as master , swich them around on the cable connecters. You can only have one master and one slave per ide chanel. Hop this helps. At 08:02 PM 5/30/2000 +0200, James (Jim) Hatridge wrote:
HI All,,,
I was given a digital 245mb HD. I can only get it to work as the slave unit. I would like to use it as the master. On the bottom is three jumpers sp ds cs. When all three are open then it will work as ths slave unit. I tryed jumping each single and it would not work at all. Can anyone tell me how to set the jumpers as master?
TIA!
Jim Hatridge hatridge@straubing.baynet.de Proud Linux User #88484 ------------------------------------------------------------------------ Jim's Beowulf Project Looking for giveaway computers and parts I need it all! Email Jim for details on how you can help build a poor man's super computer.
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com
Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
Samy Elashmawy wrote:
CS should be cable select , try it both plugs on the cable , one should be master , the other slave , make sure the other drive is se to slave . if they dont work as master , swich them around on the cable connecters.
For cable select you need a special cable, sort of like the floppy-cable. Greets, Erland. -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
plian ide cable with three conecters , one to the MB/Controller , then two further down , one for each drive. At 06:03 PM 5/31/2000 +0200, Erland Moller wrote:
Samy Elashmawy wrote:
CS should be cable select , try it both plugs on the cable , one should be master , the other slave , make sure the other drive is se to slave . if they dont work as master , swich them around on the cable connecters.
For cable select you need a special cable, sort of like the floppy-cable.
Greets, Erland.
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
For cable select you need a special cable, sort of like the floppy-cable.
If you look at a CS cable you will find that one "branch" of it has a hole in one wire (#28). That goes to the drive you want to set as Slave. The other end goes to the Master. Set the jumpers for Cable Select on *both* drives. The middle connector is the one that goes onto the IDE bus connector, and each end goes to a drive. Dontcha just love this semi-proprietary crap!? -- Regards Don Hansford ECKYTECH COMPUTING Surfing the Net (without crashing) With SuSE 6.4 Linux (Thanx Linus!) "Microsoft democratised the computer market and served as a catalyst in making computers available to everybody. Later, however, they did as many revolutionaries do -- they became dictators. History has taught us the inevitable fate of dictators." -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
On Fri, 02 Jun 2000, Don Hansford wrote:
For cable select you need a special cable, sort of like the floppy-cable.
If you look at a CS cable you will find that one "branch" of it has a hole in one wire (#28). That goes to the drive you want to set as Slave. The other end goes to the Master. Set the jumpers for Cable Select on *both* drives. The middle connector is the one that goes onto the IDE bus connector, and each end goes to a drive. Dontcha just love this semi-proprietary crap!? --
I have an old quantum HD with the three jumpers labeled as you mentioned and I think that if you want to set it as master you have to put a jumper on the ds. I use a bunch of old drives like that on my systems and it seems that it is standard to jumper ds for master and no jumper for slave. I have three drives that are 1gig or less, they are all set up the same way. -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
Hi all, I use wvdial as root on my gateway machine, to connect to the internet .... I'd like to be able to connect to the net on demand from any of the Win98s on my LAN.. I'd like stepwise instructions on this please ... I know my network is configured OK .. because i can access the net from all my machines... FYI i use an ISDN TA . Best Regards Anurag Jalan -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
participants (5)
-
a_jalan＠vsnl.com -
damianks＠netnet.net -
donh＠halenet.com.au -
erland＠pandora.be -
samelash＠ix.netcom.com