Hi all, I recently installed Opensuse on my Toshiba Satellite 2430 Laptop. Everything worked fine out of the box. Today, as I rebooted the system, suddenly the touchpad (alps) didn't move anymore. My external USB mouse works fine, though. I tried to change the configuration via Sax2, but nothing helped. Here are my xorg.conf entries: Section "InputDevice" Driver "mouse" Identifier "Mouse[1]" Option "Buttons" "7" Option "Device" "/dev/input/mice" Option "Emulate3Buttons" "on" Option "Name" "ExplorerPS/2 on USB" Option "Protocol" "ExplorerPS/2" Option "Vendor" "USB-Mouse" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Driver "synaptics" Identifier "Mouse[3]" Option "AccelFactor" "0.01" Option "BottomEdge" "650" Option "CircScrollDelta" "0.1" Option "CircScrollTrigger" "2" Option "CircularScrolling" "1" Option "Device" "/dev/input/mice" Option "EdgeMotionMaxSpeed" "15" Option "EdgeMotionMinSpeed" "15" Option "Emulate3Buttons" "on" Option "EmulateMidButtonTime" "75" Option "FingerHigh" "15" Option "FingerLow" "14" Option "HorizScrollDelta" "20" Option "LeftEdge" "120" Option "MaxSpeed" "0.5" Option "MaxTapMove" "110" Option "MaxTapTime" "180" Option "MinSpeed" "0.2" Option "Name" "Touchpad" Option "Protocol" "auto-dev" Option "RightEdge" "830" Option "SHMConfig" "on" Option "TopEdge" "120" Option "UpDownScrolling" "1" Option "Vendor" "ALPS" Option "VertScrollDelta" "20" Option "ZAxisMapping" "4 5" EndSection Section "ServerLayout" Identifier "Layout[all]" InputDevice "Keyboard[0]" "CoreKeyboard" InputDevice "Mouse[3]" "CorePointer" InputDevice "Mouse[1]" "SendCoreEvents" Option "Clone" "off" Option "Xinerama" "off" Screen "Screen[0]" EndSection My guesses are: some modules are not loaded (correctly) or the driver doesn't work properly any more. Unfortunately I am a complete Linux/SuSe Newbie and don't know what to do or where to look next. I would appreciate any help and tips, because I really would like to be able to use my touchpad again without installing everything new. Greetings, Meggy