Hi, I'm at installing opensuse 10.2 on a Fujitsu Siemens Primergy Econel 100 Server with Raid 1. I have 2 Sata Hdds installed and want these to be in a Raid 1 array. So I first configured the raid in the LSI bios, then as this page http://en.opensuse.org/How_to_install_SUSE_Linux_on_software_RAID told me for fakeraid (it is fakeraid, isnt it?!) If you want to install the kind of RAID that is supported by some motherboards (so called fakeRAID), just enable RAID in your BIOS and install as usual. NOTE: FakeRAID is only supported by openSUSE 10.2 or later. Earlier versions of SUSE DO NOT support fakeRAID I started the installation as normal though both drives, sda and sdb, showed up. So I partitioned sda and installed on it, the system booted and it works so far, except the raid. I do not find much useful documentation on the net for 10.2 and such a raid, nor on those server cds. What can you recommend? thanks i advance vb -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org