is this bad? almost 30000 colisions
view attachment. It is a txt _______________________ Raul Gutierrez Segales oxford@campoalto.edu.py
re raul, Am Dienstag, 29. Mai 2001 01:46 schrieb Raul Gutierrez Segales:
view attachment. It is a txt
_______________________ Raul Gutierrez Segales oxford@campoalto.edu.py
well. on the ethernet there can be many devices on one cable/bus. all listen until they send, but under heavy traffic it can occur that some cards try to send at the same time. thus the collisions. (especially on coax wirings) but the 5 errors should not be ok, i think ..... greets, chris -- visit me at http://mamalala.de
Cheers ! Well I would say it is very bad ! look at my ifconfig: ------------------------------------------------------------------ eth0 Linkverkapselung:Ethernet HWaddr 00:01:02:C9:1A:13 inet addr:195.141.250.131 Bcast:255.255.255.255 Maske:255.255.255.224 UP BROADCAST RUNNING MTU:1500 Metric:1 Empfangene Pakete:7217247 Fehler:0 Weggeworfen:0 Überlauf:0 Rahmen:0 Verschickte Packete:3008360 Fehler:0 Weggeworfen:0 Überlauf:0 Rahmen:3 Kollisionen:8193 Sendewarteschlangenlänge:100 Interrupt:10 Basisadresse:0x6100 --------------------------------------------------------------------------- sorry it's german but I think you can figure it out ?! Well in your case you probably have more than 6 workstations in the network ! I can give you only one advice ...you must buy a switch instead of a HUB ! cheers Patric Illi Raul Gutierrez Segales wrote:
view attachment. It is a txt
_______________________ Raul Gutierrez Segales oxford@campoalto.edu.py
------------------------------------------------------------------------ Name: ifconfig.txt ifconfig.txt Type: Plain Text (TEXT/plain) Encoding: BASE64
------------------------------------------------------------------------ -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq and the archives at http://lists.suse.com
This is my cable modem interface:
eth0 Link encap:Ethernet HWaddr 00:C0:F0:45:B9:5E
inet addr:24.27.9.229 Bcast:255.255.255.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:420040 errors:0 dropped:0 overruns:0 frame:0
TX packets:310330 errors:0 dropped:0 overruns:0 carrier:0
collisions:13978 txqueuelen:100
Interrupt:11 Base address:0x1420
Small numbers, I needed to re-compile the kernel after 56 days up.
HTH,
Jeffrey
Quoting patric illi
Cheers !
Well I would say it is very bad !
look at my ifconfig: eth0 Linkverkapselung:Ethernet HWaddr 00:01:02:C9:1A:13 inet addr:195.141.250.131 Bcast:255.255.255.255 Maske:255.255.255.224 UP BROADCAST RUNNING MTU:1500 Metric:1 Empfangene Pakete:7217247 Fehler:0 Weggeworfen:0 Überlauf:0 Rahmen:0
Verschickte Packete:3008360 Fehler:0 Weggeworfen:0 Überlauf:0 Rahmen:3 Kollisionen:8193 Sendewarteschlangenlänge:100 Interrupt:10 Basisadresse:0x6100 sorry it's german but I think you can figure it out ?! Well in your case you probably have more than 6 workstations in the network ! I can give you only one advice ...you must buy a switch instead of a HUB !
cheers
Patric Illi
Raul Gutierrez Segales wrote:
view attachment. It is a txt
_______________________ Raul Gutierrez Segales oxford@campoalto.edu.py
Name: ifconfig.txt ifconfig.txt Type: Plain Text (TEXT/plain) Encoding: BASE64
-- I don't do Windows and I don't come to work before nine. -- Johnny Paycheck
participants (4)
-
Christian Klippel -
Jeffrey Taylor -
patric illi -
Raul Gutierrez Segales