Re: [SLE] Can;t telnet to other machines on my homenet
Bruce,
What are the steps in getting SuSEfirewall2 setup, I assume:
1. tar zxvf SuSEfirewall2....tar.gz into my home dir
2. turn off personal-firewall
3. run ./INSTALL
4. check /etc/rc.config.d/firewall2.rc.config
I now I have ipchains loads (see attached file)
What else ?
Thanks,
Keith B.
Running SuSE 7.2 Personal Edition
Bruce Marshall
On Monday 06 August 2001 12:24, kbb0927@cs.com wrote:
Okay Bruce, will do. I trust you.
Best,
Keith B.
Let me know if/when you want me to scan your machine... Even if you have a dynamic IP, we could set up a time and you email me with your IP once you get connected.
Might want to do a before/after ipchains/iptables so you know 'how bad it was before'... <grin>
Bruce Marshall
wrote: On Monday 06 August 2001 11:26, kbb0927@cs.com wrote:
I can now telnet into the gateway by setting start_inetd to yes in Yast2. I have even turned on IP_FORWARD in Yast. I did download SuSEFIrewall and SuSE2FIrewall, but afraid to test it because I thought it used iptables which I know nothing about.
Regards,
Keith B.
I don't know much about iptables either (want me to prove it?? :o) but I'm using firewall2 and it works great!! I had a *very* good set of ipchains rules and didn't want to lose any security but I've externally scanned my system for problems and haven't found any. And some of the things that gave me real problems with ipchains (like forwarding VPN to an internal machine) were done automatically on the first cut using firewall2.
Give it a try.....
+------------------------------------------------------------------------- ---+ + Bruce S. Marshall bmarsh@bmarsh.com Bellaire, MI 08/06/01 12:00 + +------------------------------------------------------------------------ ----+ "In the first place, God made idiots; this was for practice; then He made school boards. -- Mark Twain"
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq and the archives at http://lists.suse.com
-- +----------------------------------------------------------------------------+ + Bruce S. Marshall bmarsh@bmarsh.com Bellaire, MI 08/06/01 13:35 + +----------------------------------------------------------------------------+ "He is no lawyer who cannot take two sides."
Module Size Used by ppp_deflate 39840 0 (autoclean) bsd_comp 4192 0 (autoclean) ppp_async 6480 1 (autoclean) ppp_generic 14416 3 (autoclean) [ppp_deflate bsd_comp ppp_async] snd-pcm-oss 18816 1 (autoclean) snd-pcm-plugin 15024 0 (autoclean) [snd-pcm-oss] snd-mixer-oss 5120 0 (autoclean) [snd-pcm-oss] snd-card-ymfpci 4576 1 snd-ymfpci 35088 0 [snd-card-ymfpci] snd-pcm 30560 0 [snd-pcm-oss snd-pcm-plugin snd-ymfpci] snd-ac97-codec 24576 0 [snd-ymfpci] snd-mixer 24224 0 [snd-mixer-oss snd-ymfpci snd-ac97-codec] snd-opl3 4848 0 [snd-card-ymfpci] snd-hwdep 3376 0 [snd-opl3] snd-timer 8560 0 [snd-pcm snd-opl3] snd-mpu401-uart 2512 0 [snd-card-ymfpci] snd-rawmidi 9664 0 [snd-mpu401-uart] snd-seq-device 4032 0 [snd-rawmidi] snd 34032 1 [snd-pcm-oss snd-pcm-plugin snd-mixer-oss snd-card-ymfpci snd-ymfpci snd-pcm snd-ac97-codec snd-mixer snd-opl3 snd-hwdep snd-timer snd-mpu401-uart snd-rawmidi snd-seq-device] soundcore 3632 3 [snd] parport_pc 18480 1 (autoclean) lp 5392 0 (autoclean) parport 24352 1 (autoclean) [parport_pc lp] printer 4960 0 mousedev 4032 0 (unused) hid 11760 0 (unused) input 3168 0 [mousedev hid] usb-uhci 21840 0 (unused) usbcore 47120 1 [printer hid usb-uhci] nfsd 67280 0 (autoclean) ipv6 126272 -1 (autoclean) ne2k-pci 4640 1 (autoclean) 8390 6240 0 (autoclean) [ne2k-pci] ipchains 33408 0 (unused) reiserfs 156432 1 aic7xxx 101936 0 (unused)
participants (1)
-
kbb0927@cs.com