I have a similar setup, but cannot get it to work either. VNC server is running on a SUSE93 system. router directs SSH-22 to an OpenBSD system. I'd like to tunnel from an outside system (Win98/WinXP) through the BSD system to the SUSE93 system. SSH from remote Win98 through router via PuTTY to OpenBSD works; VNC from a windows machine local to SUSE93 system works; but I can't seem to figure out the SSH tunneling/forwarding part. The webpage mentioned ny Sandeep refers to an old/obsolete version of PuTTY; perhaps this is part of the problem? Is there a more current page out there somewhere? The webpage is also not clear on which system one actually invokes vncviewer. Which is correct: 1) PuTTY into OpenBSD system, run vncviewer pointing to SUSE93 system 2) PuTTY into OpenBSD, ssh over to SUSE93; run vncviewer pointing to localhost. Frank At 12:15 PM 3/17/06, Sandeep Narasimha Murthy wrote:

Hi,

My Setup:

Home - Windows XP Office - 1 Solaris Box and 1 linux box

I connect to my office LAN via SSH (Solaris box). I need to reach the Linux box on my office network which has VNC server running on it.

My VNC Server in my linux box accepts requests on port 5901. I use PUTTY for SSH connection to the solaris box. I configured PUTTY according to the instructions in http://home.highertech.net/~john/Putty-Tunnel/putty-tunnel.html.

Next, launch VNC Viewer and try to do localhost:1, localhost:5901 etc.. but nothing happens..

Any suggestions ?

Thanks in adv,

Sg

-----Original Message----- From: vnc-tight-list-admin@lists.sourceforge.net [mailto:vnc-tight-list-admin@lists.sourceforge.net] On Behalf Of vnc-tight-list-request@lists.sourceforge.net Sent: sábado, 11 de Março de 2006 4:10 To: vnc-tight-list@lists.sourceforge.net Subject: VNC-Tight-list digest, Vol 1 #1648 - 7 msgs

Send VNC-Tight-list mailing list submissions to vnc-tight-list@lists.sourceforge.net

To subscribe or unsubscribe via the World Wide Web, visit https://lists.sourceforge.net/lists/listinfo/vnc-tight-list or, via email, send a message with subject or body 'help' to vnc-tight-list-request@lists.sourceforge.net

You can reach the person managing the list at vnc-tight-list-admin@lists.sourceforge.net

When replying, please edit your Subject line so it is more specific than "Re: Contents of VNC-Tight-list digest..."

Today's Topics:

1. RE: VNC-Tight-list digest, Vol 1 #1647 - 3 msgs (Sandeep Narasimha Murthy) 2. RE: VNC-Tight-list digest, Vol 1 #1647 - 3 msgs (John Aldrich) 3. Win 98 (nono) 4. RE: Win 98 (James Weatherall) 5. Connection options (David Russo) 6. RE: Connection options (John Aldrich) 7. RE: Connection options (Van Sickler, Jim)

--__--__--

Message: 1 Subject: RE: VNC-Tight-list digest, Vol 1 #1647 - 3 msgs Date: Fri, 10 Mar 2006 10:06:16 -0000 From: "Sandeep Narasimha Murthy" To: Cc:

Hi guys,

I am trying to do exactly what Ron is suggesting but having some = problems. The local machine is a WinXP machine and I connect to the = remote Server X using PUTTY.

How exactly do I configure Port forwarding in Putty ? and do I need to = run an additional X Server on my local machine ??

Thanks a lot,

Sandeep Murthy

-----Original Message----- From: vnc-tight-list-admin@lists.sourceforge.net = [mailto:vnc-tight-list-admin@lists.sourceforge.net] On Behalf Of = vnc-tight-list-request@lists.sourceforge.net Sent: sexta-feira, 10 de Mar=E7o de 2006 4:14 To: vnc-tight-list@lists.sourceforge.net Subject: VNC-Tight-list digest, Vol 1 #1647 - 3 msgs

Send VNC-Tight-list mailing list submissions to vnc-tight-list@lists.sourceforge.net

To subscribe or unsubscribe via the World Wide Web, visit https://lists.sourceforge.net/lists/listinfo/vnc-tight-list or, via email, send a message with subject or body 'help' to vnc-tight-list-request@lists.sourceforge.net

You can reach the person managing the list at vnc-tight-list-admin@lists.sourceforge.net

When replying, please edit your Subject line so it is more specific than "Re: Contents of VNC-Tight-list digest..."

Today's Topics:

1. Unix to Windows via VNC (Sandeep Narasimha Murthy) 2. Re: Unix to Windows via VNC (R) 3. Re: Unix to Windows via VNC (Ron Joffe)

-- __--__--

Message: 1 Subject: Unix to Windows via VNC Date: Thu, 9 Mar 2006 09:59:30 -0000 From: "Sandeep Narasimha Murthy" To:

This is a multi-part message in MIME format.

------_=3D_NextPart_001_01C64360.29425D13 Content-Type: text/plain; charset=3D"us-ascii" Content-Transfer-Encoding: quoted-printable

Hi,

=3D20

I am connecting to a remote Solaris server X via SSH and from server X have telnet and ftp access to all other machines on the network where the server X resides.

=3D20

My question is whether I can use tightVNC to connect to a windows machine from this Server X ?? i.e. launch a VNC session from the server ..

=3D20

Appreciate some suggestions,

=3D20

TIA,

=3D20

Sandeep

------_=3D_NextPart_001_01C64360.29425D13 Content-Type: text/html; charset=3D"us-ascii" Content-Transfer-Encoding: quoted-printable

xmlns:w=3D3D"urn:schemas-microsoft-com:office:word" =3D xmlns=3D3D"http://www.w3.org/TR/REC-html40">

Hi,

I am connecting to a remote Solaris server X = =3D via SSH and from server X have telnet and ftp access to all other machines on = =3D the network where the server X resides.

My question is whether I can use tightVNC to = =3D connect to a windows machine from this Server X ?? i.e. launch a VNC =3D session from the server ..

Appreciate some =3D suggestions,

TIA,

Sandeep

------_=3D_NextPart_001_01C64360.29425D13--

-- __--__--

Message: 2 Date: Thu, 9 Mar 2006 13:57:40 +0000 From: R To: vnc-tight-list@lists.sourceforge.net Subject: Re: Unix to Windows via VNC

On Thu, Mar 09, 2006 at 09:59:30AM -0000, Sandeep Narasimha Murthy = wrote:

...

Hi, =20 I am connecting to a remote Solaris server X via SSH and from server X have telnet and ftp access to all other machines on the network where the server X resides. =20 My question is whether I can use tightVNC to connect to a windows machine from this Server X ?? i.e. launch a VNC session from the = server ..

Since tightvnc is a graphical interface not a command line one, the simple answer is No, Having said that, if you can get the display that would be displayed on server X tunnlled back to your initial machine then yo could do this. It may be possible that you can do this by using the X11 Forwarding feature of SSH, and running a local X server, but this is a lot of hassle. Why not just run your tightvnc viewer on your local machine and tunnel that down to the other machines you want to acccess?

This is what I do here when I'm at work.

I SSH back to my home and login to a machine running OpenBSD which acts as my firewall etc. I port forward, using SSH tunneling, several local ports on my work PC to remote machines on the internal LAN of the remote OpenBSD machine.

I then run tightvnc locally, connect to localhost port 5901, and this gets forwarded to remote machine 192.168.1.x. If I connect to localhost port 5902 it gets forwarded to 192.168.1.y on my remote LAN etc etc. Works fine.

HTH

R. --=20 Today is the tomorrow you were worrying about yesterday. But tomorrow, today will be yesterday and you will be wondering why you were worrying about it in the first place.

-- __--__--

Message: 3 From: Ron Joffe To: vnc-tight-list@lists.sourceforge.net Subject: Re: Unix to Windows via VNC Date: Thu, 9 Mar 2006 10:59:38 -0500

On Thursday 09 March 2006 04:59, Sandeep Narasimha Murthy wrote:

...

I am connecting to a remote Solaris server X via SSH and from server X have telnet and ftp access to all other machines on the network where the server X resides.

Sandeep,

Is this the scenario you have?

1. You want to connect to a vnc server residing on a windows machine = (port=3D =3D20 5900 of ip 1.2.3.4).=3D20

2. The windows machine is accessible to the solaris server (ip = 6.7.8.9).=3D20

3. You access the solaris server via ssh.

If so, a bit of port redirection in in order.

=3D46rom you local machine (I am assuming unix flavor, but it can be the = same=3D via=3D20 putty on windows):

ssh -C -g -L 5910:1.2.3.4:5900 login@6.7.8.9

This will set up an ssh tunnel from your local machine to the solaris = serve=3D r.=3D20 Then it will add a port tunnel between the windows vnc server (port 5900 = of=3D =3D20 1.2.3.4) and port 5910 of your local machine.

Next:

vncviewer localhost:10

Try that out and let me know.

Ron

-- __--__--

___________________________________________________________ TightVNC mailing list, VNC-Tight-list@lists.sourceforge.net To change your subscription or to UNSUBSCRIBE, please visit https://lists.sourceforge.net/lists/listinfo/vnc-tight-list

End of VNC-Tight-list Digest

--__--__--

Message: 2 From: John Aldrich To: 'Sandeep Narasimha Murthy' Cc: "VNC List (E-mail)" Subject: RE: VNC-Tight-list digest, Vol 1 #1647 - 3 msgs Date: Fri, 10 Mar 2006 09:08:48 -0500

vnc-tight-list-admin@lists.sourceforge.net wrote on :

...

Hi guys,

I am trying to do exactly what Ron is suggesting but having some problems. The local machine is a WinXP machine and I connect to the remote Server X using PUTTY.

How exactly do I configure Port forwarding in Putty ? and do I need to run an additional X Server on my local machine ??

Sandeep: See http://faq.gotomyvnc.com/fom-serve/cache/30.html There's a couple step-by-step how-to documents listed there.

--__--__--

Message: 3 From: "nono" To: Subject: Win 98 Date: Fri, 10 Mar 2006 12:43:33 -0300

This is a multi-part message in MIME format.

------=_NextPart_000_0033_01C64440.3E0DB800 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable

First, sorry but my english is too bad.

My question is...

I install the VNC on W98se and make that start in service mode.... When the PC Starts showme the configuration windows. Why?

Thanks !

------=_NextPart_000_0033_01C64440.3E0DB800 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> First, sorry but my english is too=20 bad.

My question is...

I install the VNC on W98se and make = that=20 start in service mode.... When the PC Starts showme the = configuration=20 windows. Why?

Thanks !

------=_NextPart_000_0033_01C64440.3E0DB800--

--__--__--

Message: 4 From: "James Weatherall" To: "'nono'" , Subject: RE: Win 98 Date: Fri, 10 Mar 2006 17:29:34 -0000 Organization: RealVNC Ltd.

Nono,

You're seeing this behaviour because you're running a VNC 3.3-based server and haven't configured it for service-mode. You can either configure the service-mode settings, or you may find it simpler to upgrade to VNC Server 4 (http://www.realvnc.com/download.html).

Cheers,

Wez @ RealVNC Ltd.

...

-----Original Message----- From: vnc-tight-list-admin@lists.sourceforge.net [mailto:vnc-tight-list-admin@lists.sourceforge.net] On Behalf Of nono Sent: 10 March 2006 15:44 To: vnc-tight-list@lists.sourceforge.net Subject: Win 98

First, sorry but my english is too bad.

My question is...

I install the VNC on W98se and make that start in service mode.... When the PC Starts showme the configuration windows. Why?

Thanks !

--__--__--

Message: 5 Date: Fri, 10 Mar 2006 13:12:58 -0500 From: "David Russo" To: Subject: Connection options

--=__Part46631EBA.0__= Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit

How do I save changes to the Viewer connection options so that I don't have to set them each time?

How do I remove IP addresses from the drop down list in viewer connections?

Thanks.

--=__Part46631EBA.0__= Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Content-Description: HTML

How do I save changes to the Viewer connection options so that I = don't have to set them each time?

How do I remove IP addresses from the drop down list in viewer = connections?

Thanks.

--=__Part46631EBA.0__=--

--__--__--

Message: 6 From: John Aldrich To: 'David Russo' , vnc-tight-list@lists.sourceforge.net Subject: RE: Connection options Date: Fri, 10 Mar 2006 13:18:25 -0500

David Russo wrote on Friday, March 10, 2006 1:13 PM:

...

How do I save changes to the Viewer connection options so that I don't have to set them each time?

How do I remove IP addresses from the drop down list in viewer connections?

Thanks.

the first part is simple. Open a connection somewhere and then make the changes you want. Then hit your "F8" key and select "options" then click on the "load/save" tab and then in the "defaults" section, click "save" and that becomes your new default settings. Not sure how to clear the IP address from the drop-down box, unless you do it through Windows.

--__--__--

Message: 7 Date: Fri, 10 Mar 2006 16:59:36 -0500 From: "Van Sickler, Jim" Subject: RE: Connection options To: "Vnc-T-l (E-mail)"

-----Original Message----- From: Van Sickler, Jim Sent: Friday, March 10, 2006 11:37 AM To: 'John Aldrich' Subject: RE: Connection options

...

-----Original Message----- From: vnc-tight-list-admin@lists.sourceforge.net [mailto:vnc-tight-list-admin@lists.sourceforge.net] Sent: Friday, March 10, 2006 11:18 AM To: 'David Russo'; vnc-tight-list@lists.sourceforge.net Subject: RE: Connection options

David Russo wrote on Friday, March 10, 2006 1:13 PM:

...

How do I save changes to the Viewer connection options so that I don't have to set them each time?

How do I remove IP addresses from the drop down list in viewer connections?

Thanks.

the first part is simple. Open a connection somewhere and then make the changes you want. Then hit your "F8" key and select "options" then click on the "load/save" tab and then in the "defaults" section, click "save" and that becomes your new default settings. Not sure how to clear the IP address from the drop-down box, unless you do it through Windows.

To remove the previous sessions, open up the vncviewer, ("New TightVNC Connection" at the top) click on Options, then the Globals tab, and click on the "Clear the list of saved connections" button.

Jim

--__--__--

___________________________________________________________ TightVNC mailing list, VNC-Tight-list@lists.sourceforge.net To change your subscription or to UNSUBSCRIBE, please visit https://lists.sourceforge.net/lists/listinfo/vnc-tight-list

End of VNC-Tight-list Digest

------------------------------------------------------- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmdk&kid0944&bid$1720&dat1642 ___________________________________________________________ TightVNC mailing list, VNC-Tight-list@lists.sourceforge.net To change your subscription or to UNSUBSCRIBE, please visit https://lists.sourceforge.net/lists/listinfo/vnc-tight-list