[opensuse] default root password
Hi I installed opensuse 12.3 by following this link: https://en.opensuse.org/HCL:Highbank#Installing_the_openSUSE_12.3_Image_.28P... this section: Installing the openSUSE 12.3 Image (direct disk access) After finish and reboot, it ask me login user name and password. During the install, it dose not ask to create a user account, so I login as root, but I don't know the root password. Could anyone tell me what is default root password? or default user/password? Thanks, Yaning -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 19/06/13 16:58, Yaning wrote:
Hi I installed opensuse 12.3 by following this link: https://en.opensuse.org/HCL:Highbank#Installing_the_openSUSE_12.3_Image_.28P...
this section:
Installing the openSUSE 12.3 Image (direct disk access)
After finish and reboot, it ask me login user name and password. During the install, it dose not ask to create a user account, so I login as root, but I don't know the root password. Could anyone tell me what is default root password? or default user/password?
Is it not just 'linux' like with a Live CD? -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 6/19/2013 11:34 AM, Peter wrote:
On 19/06/13 16:58, Yaning wrote:
Hi I installed opensuse 12.3 by following this link: https://en.opensuse.org/HCL:Highbank#Installing_the_openSUSE_12.3_Image_.28P...
this section:
Installing the openSUSE 12.3 Image (direct disk access)
After finish and reboot, it ask me login user name and password. During the install, it dose not ask to create a user account, so I login as root, but I don't know the root password. Could anyone tell me what is default root password? or default user/password?
Is it not just 'linux' like with a Live CD? I could possibly be your user password too. One of the options during an install is that the first user name's password can be the same as the administration password. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Hi I installed opensuse 12.3 by following this link: https://en.opensuse.org/HCL:Highbank#Installing_the_openSUSE_12.3_Imag e_.28PXE_deployment.29
this section:
Installing the openSUSE 12.3 Image (direct disk access)
After finish and reboot, it ask me login user name and password. During the install, it dose not ask to create a user account, so I login as root, but I don't know the root password. Could anyone tell me what is default root password? or default user/password? Are you sure your install DVD was good? did you check the checksums and
On Wednesday, June 19, 2013 07:58:30 AM Yaning wrote: the do the media check before the install. Every install of openSUSE I have done always asks for a user name and password and for a root password, right after the the disk partiting section. Can you login from runlevel 3, (Text Mode)?
Thanks, Yaning -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org -- openSUSE 12.3(Linux 3.7.10-1.11-desktop x86_64)|KDE 4.10.4 "release 569"|Intel core2duo 2.5 MHZ,|8GB DDR3|GeForce 8400GS(NVIDIA-Linux-x86_64-319.17)
-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 06/19/2013 06:41 PM, Upscope wrote:
Every install of openSUSE I have done always asks for a user name and password and for a root password, right after the the disk partiting section.
me too, but i have never done a "PXE deployment" on an "ARM Highbank" (whatever all that means)...have you? dd -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 6/19/2013 9:51 AM, DenverD wrote:
On 06/19/2013 06:41 PM, Upscope wrote:
Every install of openSUSE I have done always asks for a user name and password and for a root password, right after the the disk partiting section.
me too, but i have never done a "PXE deployment" on an "ARM Highbank" (whatever all that means)...have you?
dd
You'd expect this behavior from Ubuntu, but not from Linux. The first thing I would do is log in as a user and see if sudo -s would yield a shell (as root), then set root's password. Then I'd take the first user out of the admin group. Always having a separate login for root saves so much grief down the road. -- _____________________________________ ---This space for rent--- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On Wednesday, June 19, 2013 06:51:57 PM DenverD wrote:
On 06/19/2013 06:41 PM, Upscope wrote:
Every install of openSUSE I have done always asks for a user name and password and for a root password, right after the the disk partiting section.
me too, but i have never done a "PXE deployment" on an "ARM Highbank" (whatever all that means)...have you? NO
dd -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org -- openSUSE 12.3(Linux 3.7.10-1.11-desktop x86_64)|KDE 4.10.4 "release 569"|Intel core2duo 2.5 MHZ,|8GB DDR3|GeForce 8400GS(NVIDIA-Linux-x86_64-319.17)
-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Reboot the machine and add init=/bin/bash on the grub command line, this will boot you directly into a root shell. Then run "passwd" and set your root password, then reboot and you'll be all set. Perhaps emailing the maintainers of Highbank and asking them what they've set the root password might bare some fruit. -- Later, Darin On Wed, Jun 19, 2013 at 10:58 AM, Yaning <yaning98@gmail.com> wrote:
Hi I installed opensuse 12.3 by following this link: https://en.opensuse.org/HCL:Highbank#Installing_the_openSUSE_12.3_Image_.28P...
this section:
Installing the openSUSE 12.3 Image (direct disk access)
After finish and reboot, it ask me login user name and password. During the install, it dose not ask to create a user account, so I login as root, but I don't know the root password. Could anyone tell me what is default root password? or default user/password?
Thanks, Yaning -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Just for others' information, it seems that the OP succeeded with 'linux' as I suggested, but I just noticed their reply was to me rather than to the list where it was probably intended. I made the same mistake myself earlier in the week. At least where I am I can blame the heat. On Wed, Jun 19, 2013 at 8:34 AM, Peter wrote:
On 19/06/13 16:58, Yaning wrote:
Hi I installed opensuse 12.3 by following this link:
https://en.opensuse.org/HCL:Highbank#Installing_the_openSUSE_12.3_Image_.28P...
this section:
Installing the openSUSE 12.3 Image (direct disk access)
After finish and reboot, it ask me login user name and password. During the install, it dose not ask to create a user account, so I login as root, but I don't know the root password. Could anyone tell me what is default root password? or default user/password?
Is it not just 'linux' like with a Live CD?
On 19/06/13 18:02, Yaning wrote:
Yes, thank you very much
Yaning -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 6/20/2013 3:36 PM, Peter wrote:
Just for others' information, it seems that the OP succeeded with 'linux' as I suggested, but I just noticed their reply was to me rather than to the list where it was probably intended. I made the same mistake myself earlier in the week. At least where I am I can blame the heat.
A scary choice. How many insecure installations are there out there with linux as the default password? Hopefully root can only log in locally, but still, not a good practice. -- _____________________________________ ---This space for rent--- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Thursday, 2013-06-20 at 17:35 -0700, John Andersen wrote:
On 6/20/2013 3:36 PM, Peter wrote:
Just for others' information, it seems that the OP succeeded with 'linux' as I suggested, but I just noticed their reply was to me rather than to the list where it was probably intended. I made the same mistake myself earlier in the week. At least where I am I can blame the heat.
A scary choice. How many insecure installations are there out there with linux as the default password?
Whatever the default password is for any system has the same risk, they are publicly known. It doesn't matter how complex they are. Default passwords have to be changed at the first chance. - -- Cheers, Carlos E. R. (from 12.3 x86_64 "Dartmouth" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iEYEARECAAYFAlHDqncACgkQtTMYHG2NR9V6/wCgi0ffcJcQvtZLmAk7raplUXW6 A24AoJGk7OH3eNtrvIRNhcuA/JRDFLWz =yUSY -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 6/20/2013 6:20 PM, Carlos E. R. wrote:
Whatever the default password is for any system has the same risk, they are publicly known. It doesn't matter how complex they are.
Not necessarily. Many wifi routers now days come with the default password containing the serial number. There is no way to determine this without having the device in hand. -- _____________________________________ ---This space for rent--- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Thursday, 2013-06-20 at 18:24 -0700, John Andersen wrote:
On 6/20/2013 6:20 PM, Carlos E. R. wrote:
Whatever the default password is for any system has the same risk, they are publicly known. It doesn't matter how complex they are.
Not necessarily. Many wifi routers now days come with the default password containing the serial number. There is no way to determine this without having the device in hand.
Nice trick. I have not bumped into one of those. Anyway... my router has a default fixed password. I changed both login and password, but as its control page is http, they can be sniffed. Local security is nil. Who is going to sniff it? Well, it has parental control, so the kids will, eventually >:-P - -- Cheers, Carlos E. R. (from 12.3 x86_64 "Dartmouth" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iEYEARECAAYFAlHDrXkACgkQtTMYHG2NR9UpJgCdF4SaedfQxTwxIAxup4NzWqmk VkkAn2Q41AAUICB7WdW3PRLwWQ/73Fqa =uhcj -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Carlos E. R. wrote:
On Thursday, 2013-06-20 at 18:24 -0700, John Andersen wrote:
On 6/20/2013 6:20 PM, Carlos E. R. wrote:
Whatever the default password is for any system has the same risk, they are publicly known. It doesn't matter how complex they are.
Not necessarily. Many wifi routers now days come with the default password containing the serial number. There is no way to determine this without having the device in hand.
Nice trick. I have not bumped into one of those.
But it's only a nice trick for a piece of hardware that you can print the password on! It can't be applied to a downloaded software image. So it isn't an answer to the issue that you described. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Friday, 2013-06-21 at 10:32 +0100, Dave Howorth wrote:
Nice trick. I have not bumped into one of those.
But it's only a nice trick for a piece of hardware that you can print the password on! It can't be applied to a downloaded software image. So it isn't an answer to the issue that you described.
For those, as I said before, you change the password as soon as you can. Supposedly, remote network should be disabled till you do, at least. - -- Cheers, Carlos E. R. (from 12.3 x86_64 "Dartmouth" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iEYEARECAAYFAlHEO3UACgkQtTMYHG2NR9WQ4ACfYHZz9JqiMPvMfTL8587qY1Qg GNkAnA5DicScTYn4z1glv/Or+k/aeudd =gFLz -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Really? All my computers have at least one number that is unique which can be fetched by software as it is being installed. Disks, nics, cpus, etc. Ask the user their mother's middle name, anything but a standard default. Dave Howorth <dhoworth@mrc-lmb.cam.ac.uk> wrote:
Carlos E. R. wrote:
On Thursday, 2013-06-20 at 18:24 -0700, John Andersen wrote:
On 6/20/2013 6:20 PM, Carlos E. R. wrote:
Whatever the default password is for any system has the same risk, they are publicly known. It doesn't matter how complex they are.
Not necessarily. Many wifi routers now days come with the default password containing the serial number. There is no way to determine this without having the device in hand.
Nice trick. I have not bumped into one of those.
But it's only a nice trick for a piece of hardware that you can print the password on! It can't be applied to a downloaded software image. So it isn't an answer to the issue that you described.
-- Sent from my Android phone with K-9 Mail. Please excuse my brevity. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On Thu, Jun 20, 2013 at 8:35 PM, John Andersen <jsamyth@gmail.com> wrote:
On 6/20/2013 3:36 PM, Peter wrote:
Just for others' information, it seems that the OP succeeded with 'linux' as I suggested, but I just noticed their reply was to me rather than to the list where it was probably intended. I made the same mistake myself earlier in the week. At least where I am I can blame the heat.
A scary choice. How many insecure installations are there out there with linux as the default password?
Hopefully root can only log in locally, but still, not a good practice.
Susestudio defaults to linux as the root default password. You can change that when you create a build, but the new default password is shown to the world if you publish the appliance, so there is not much point. Greg -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
participants (10)
-
Carlos E. R. -
Darin Perusich -
Dave Howorth -
DenverD -
Greg Freemyer -
John Andersen -
Michael S. Dunsavage -
Peter -
Upscope -
Yaning