[opensuse] Bluetooth configuration a seeming no-go
Hello everyone, I have been trying - and, thus far, without success - to connect a Bluetooth mosue (by Interlink) to a Linux machine. I have tried on two machines: a Dell Vostro 1500 with OpenSuSE 11 and a desktop with OpenSuSE 10.3 with a USB bluetooth dongle. On none of them does hcitool even find any devices. So, basically, thus far I am dead in the water. Any advice would be much appreciated. Boris. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Fri, Aug 8, 2008 at 11:52 AM, Boris Epstein
Hello everyone,
I have been trying - and, thus far, without success - to connect a Bluetooth mosue (by Interlink) to a Linux machine. I have tried on two machines: a Dell Vostro 1500 with OpenSuSE 11 and a desktop with OpenSuSE 10.3 with a USB bluetooth dongle. On none of them does hcitool even find any devices.
So, basically, thus far I am dead in the water. Any advice would be much appreciated.
Boris. --
I did this on my Dell 9400, and it was so easy I don't remember all the details. Basically it just worked. I run Kbluetooth. I right clicked the tray icon and selected Configuration / Input Devices and then on the input divices pop-up I selected Add new device just after pushing the Find-Me button on the bottom of the mouse. My mouse was a Dell Branded Anatel. Your Bluetooth address and pin are usually printed on the bottom of the mouse. You might need these. My laptop's bluetooth was built in, not a dongle, so that might be different than your situation, because the dongle has to first get thru the USB layer before you can even talk to it. -- ----------JSA--------- There are 10 kinds of people in this world, those that can read binary and those that can't. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
--- On Fri, 8/8/08, John Andersen
Hello everyone,
I have been trying - and, thus far, without success - to connect a Bluetooth mosue (by Interlink) to a Linux machine. I have tried on two machines: a Dell Vostro 1500 with OpenSuSE 11 and a desktop with OpenSuSE 10.3 with a USB bluetooth dongle. On none of
From: John Andersen
Subject: Re: [opensuse] Bluetooth configuration a seeming no-go To: Cc: "opensuse" Date: Friday, August 8, 2008, 8:09 PM On Fri, Aug 8, 2008 at 11:52 AM, Boris Epstein wrote: them does hcitool even find any devices.
So, basically, thus far I am dead in the water. Any advice would be much appreciated.
Boris.
Bluetooth mouse doesn't use hci server but hidd; personnally I use an acer mouse on a ferrari serie laptop under suse10.2 and it works but sometimes you have to be very patient; to search for devices type hidd --search, for help for options type hidd --help etc...
--
I did this on my Dell 9400, and it was so easy I don't remember all the details. Basically it just worked.
I run Kbluetooth.
I right clicked the tray icon and selected Configuration / Input Devices and then on the input divices pop-up I selected Add new device just after pushing the Find-Me button on the bottom of the mouse.
My mouse was a Dell Branded Anatel. Your Bluetooth address and pin are usually printed on the bottom of the mouse.
Really??lucky man I don't have it on my mouse (acer ferrari); the adress of the device is given by hidd --search or hidd --show; once it is know, keep it safe and to connect type:
hidd --connect
need these.
My laptop's bluetooth was built in, not a dongle, so that might be different than your situation, because the dongle has to first get thru the USB layer before you can even talk to it.
-- ----------JSA--------- There are 10 kinds of people in this world, those that can read binary and those that can't. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Friday 08 August 2008, Boris Epstein wrote:
Hello everyone,
I have been trying - and, thus far, without success - to connect a Bluetooth mosue (by Interlink) to a Linux machine. I have tried on two machines: a Dell Vostro 1500 with OpenSuSE 11 and a desktop with OpenSuSE 10.3 with a USB bluetooth dongle. On none of them does hcitool even find any devices.
So, basically, thus far I am dead in the water. Any advice would be much appreciated.
Boris.
not sure if this is a similar device but i have a Logitech mouse that uses a usb dongle all i do is plug the dongle in and bingo mouse up and running on 10.3 on 11.0 i have to leave it out till everything has settled down then plug the dongle in that is yet another reason that 11.0 has been canned Pete -- SuSE Linux 10.3-Alpha3. (Linux is like a wigwam - no Gates, no Windows, and an Apache inside.) -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Sat, Aug 9, 2008 at 3:58 AM, peter nikolic
On Friday 08 August 2008, Boris Epstein wrote:
Hello everyone,
I have been trying - and, thus far, without success - to connect a Bluetooth mosue (by Interlink) to a Linux machine. I have tried on two machines: a Dell Vostro 1500 with OpenSuSE 11 and a desktop with OpenSuSE 10.3 with a USB bluetooth dongle. On none of them does hcitool even find any devices.
So, basically, thus far I am dead in the water. Any advice would be much appreciated.
Boris.
not sure if this is a similar device but i have a Logitech mouse that uses a usb dongle all i do is plug the dongle in and bingo mouse up and running on 10.3 on 11.0 i have to leave it out till everything has settled down then plug the dongle in that is yet another reason that 11.0 has been canned
Pete
Yes,but USB is a totally different problem than Bluetooth. I've only run 11.0 on virtual machines, which hides the bluetooth from the actual OS, but 10.2 and 10.3 just found the bluetooth automatically. I don't remember if there was something to do in yast or not. -- ----------JSA--------- There are 10 kinds of people in this world, those that can read binary and those that can't. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
participants (4)
-
Boris Epstein
-
John Andersen
-
Michel Maria-Sube
-
peter nikolic