Cannot connect to ISP with Kinternet
I have setup the modem, etc. but when I try to dial with Kinternet, it comes up dials, connects, then sends dummy password where ISP comes back and says login/password pair mismatch. If I dial with KPPP, it connects with no problem. How do I get Kinternet to do the correct login and password? It is selecting the correct modem etc. Also had this problem with 7.3 on the desktop, but on the laptop, it worked with 7.3. Now, the laptop comes up with same problem. Art Fore
Here is the log from Kinternet. Looks like it is sending dummy logon and
some unknown password. Does anyone know where is this coming from and how
can I fix it?
SuSE Meta pppd (smpppd), Version 0.73 on sporthorse.
wwwoffle not is running
Selection of interface/provider "ppp0"/"AT&T WorldNet Service (AT&T Corp)"
succeeded.
Starting connection. (2002-04-26 23:55:53 PDT)
pppd: Plugin passwordfd.so loaded.
pppd: Perms of /dev/ttyS3 are ok, no 'mesg n' neccesary.
pppd: --> WvDial: Internet dialer version 1.42
pppd: --> Initializing modem.
pppd: --> Sending: ATZ
pppd: ATZ
pppd: OK
pppd: --> Sending: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
pppd: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
pppd: OK
pppd: --> Sending: ATM1
pppd: ATM1
pppd: OK
pppd: --> Modem initialized.
pppd: --> Sending: ATDT5408991
pppd: --> Waiting for carrier.
pppd: ATDT5408991
pppd: CONNECT 115200
pppd: --> Carrier detected. Waiting for prompt.
pppd: STATION ID - snfca11rh08hp001,snfca43ev
pppd: Welcome
pppd: Please Sign-on:
pppd: --> Looks like a login prompt.
pppd: --> Sending: dummy
pppd: dummy
pppd: Password:
pppd: --> Looks like a password prompt.
pppd: --> Sending: (password)
pppd: Name, password pair incorrect
pppd: Please Sign-on:
pppd: --> Looks like a login prompt.
pppd: --> Sending: dummy
pppd: dummy
pppd: Password:
pppd: --> Looks like a password prompt.
pppd: --> Sending: (password)
pppd: Name, password pair incorrect
pppd: Please Sign-on:
pppd: --> Looks like a login prompt.
pppd: --> Sending: dummy
pppd: --> Don't know what to do! Starting pppd and hoping for the best.
pppd: Serial connection established.
pppd: using channel 2
pppd: Using interface ppp0
pppd: Connect: ppp0 <--> /dev/ttyS3
pppd: sent [LCP ConfReq id=0x1
Hi Check /etc/wvdial.conf Jaska Viestissä Lauantai 27. Huhtikuuta 2002 10:23, Art Fore kirjoitti:
Here is the log from Kinternet. Looks like it is sending dummy logon and some unknown password. Does anyone know where is this coming from and how can I fix it?
SuSE Meta pppd (smpppd), Version 0.73 on sporthorse. wwwoffle not is running Selection of interface/provider "ppp0"/"AT&T WorldNet Service (AT&T Corp)" succeeded. Starting connection. (2002-04-26 23:55:53 PDT) pppd: Plugin passwordfd.so loaded. pppd: Perms of /dev/ttyS3 are ok, no 'mesg n' neccesary. pppd: --> WvDial: Internet dialer version 1.42 pppd: --> Initializing modem. pppd: --> Sending: ATZ pppd: ATZ pppd: OK pppd: --> Sending: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 pppd: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 pppd: OK pppd: --> Sending: ATM1 pppd: ATM1 pppd: OK pppd: --> Modem initialized. pppd: --> Sending: ATDT5408991 pppd: --> Waiting for carrier. pppd: ATDT5408991 pppd: CONNECT 115200 pppd: --> Carrier detected. Waiting for prompt. pppd: STATION ID - snfca11rh08hp001,snfca43ev pppd: Welcome pppd: Please Sign-on: pppd: --> Looks like a login prompt. pppd: --> Sending: dummy pppd: dummy pppd: Password: pppd: --> Looks like a password prompt. pppd: --> Sending: (password) pppd: Name, password pair incorrect pppd: Please Sign-on: pppd: --> Looks like a login prompt. pppd: --> Sending: dummy pppd: dummy pppd: Password: pppd: --> Looks like a password prompt. pppd: --> Sending: (password) pppd: Name, password pair incorrect pppd: Please Sign-on: pppd: --> Looks like a login prompt. pppd: --> Sending: dummy pppd: --> Don't know what to do! Starting pppd and hoping for the best. pppd: Serial connection established. pppd: using channel 2 pppd: Using interface ppp0 pppd: Connect: ppp0 <--> /dev/ttyS3 pppd: sent [LCP ConfReq id=0x1
<pcomp> <accomp>] pppd: sent [LCP ConfReq id=0x1 <pcomp> <accomp>] pppd: sent [LCP ConfReq id=0x1 <pcomp> <accomp>] pppd: sent [LCP ConfReq id=0x1 <pcomp> <accomp>] pppd: sent [LCP ConfReq id=0x1 <pcomp> <accomp>] pppd: sent [LCP ConfReq id=0x1 <pcomp> <accomp>] pppd: sent [LCP ConfReq id=0x1 <pcomp> <accomp>] pppd: sent [LCP ConfReq id=0x1 <pcomp> <accomp>] pppd: sent [LCP ConfReq id=0x1 <pcomp> <accomp>] pppd: sent [LCP ConfReq id=0x1 <pcomp> <accomp>] pppd: sent [LCP ConfReq id=0x1 <pcomp> <accomp>] pppd: sent [LCP ConfReq id=0x1 <pcomp> <accomp>] pppd: sent [LCP ConfReq id=0x1 <pcomp> <accomp>] pppd: sent [LCP ConfReq id=0x1 <pcomp> <accomp>] pppd: sent [LCP ConfReq id=0x1 <pcomp> <accomp>] pppd: sent [LCP ConfReq id=0x1 <pcomp> <accomp>] pppd: Hangup (SIGHUP) pppd: Modem hangup pppd: Connection terminated. pppd died: A modem hung up the phone (exit code 16) -----Original Message----- From: Art Fore [mailto:art_fore@3mts.com] Sent: Friday, April 26, 2002 10:31 PM To: suse-linux-e@suse.com Subject: [SLE] Cannot connect to ISP with Kinternet
I have setup the modem, etc. but when I try to dial with Kinternet, it comes up dials, connects, then sends dummy password where ISP comes back and says login/password pair mismatch.
If I dial with KPPP, it connects with no problem. How do I get Kinternet to do the correct login and password? It is selecting the correct modem etc. Also had this problem with 7.3 on the desktop, but on the laptop, it worked with 7.3. Now, the laptop comes up with same problem.
Art Fore
Put logon and password in wvdial.conf. Now it does not even connect! Just does abnormal termination. Art -----Original Message----- From: jaakko tamminen [mailto:jtamminen@satabaana.net] Sent: Saturday, April 27, 2002 12:30 AM To: art_fore@3mts.com; suse-linux-e@suse.com Subject: Re: [SLE] Cannot connect to ISP with Kinternet, additional info Hi Check /etc/wvdial.conf Jaska Viestissä Lauantai 27. Huhtikuuta 2002 10:23, Art Fore kirjoitti:
Here is the log from Kinternet. Looks like it is sending dummy logon and some unknown password. Does anyone know where is this coming from and how can I fix it?
SuSE Meta pppd (smpppd), Version 0.73 on sporthorse. wwwoffle not is running Selection of interface/provider "ppp0"/"AT&T WorldNet Service (AT&T Corp)" succeeded. Starting connection. (2002-04-26 23:55:53 PDT) pppd: Plugin passwordfd.so loaded. pppd: Perms of /dev/ttyS3 are ok, no 'mesg n' neccesary. pppd: --> WvDial: Internet dialer version 1.42 pppd: --> Initializing modem. pppd: --> Sending: ATZ pppd: ATZ pppd: OK pppd: --> Sending: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 pppd: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 pppd: OK pppd: --> Sending: ATM1 pppd: ATM1 pppd: OK pppd: --> Modem initialized. pppd: --> Sending: ATDT5408991 pppd: --> Waiting for carrier. pppd: ATDT5408991 pppd: CONNECT 115200 pppd: --> Carrier detected. Waiting for prompt. pppd: STATION ID - snfca11rh08hp001,snfca43ev pppd: Welcome pppd: Please Sign-on: pppd: --> Looks like a login prompt. pppd: --> Sending: dummy pppd: dummy pppd: Password: pppd: --> Looks like a password prompt. pppd: --> Sending: (password) pppd: Name, password pair incorrect pppd: Please Sign-on: pppd: --> Looks like a login prompt. pppd: --> Sending: dummy pppd: dummy pppd: Password: pppd: --> Looks like a password prompt. pppd: --> Sending: (password) pppd: Name, password pair incorrect pppd: Please Sign-on: pppd: --> Looks like a login prompt. pppd: --> Sending: dummy pppd: --> Don't know what to do! Starting pppd and hoping for the best. pppd: Serial connection established. pppd: using channel 2 pppd: Using interface ppp0 pppd: Connect: ppp0 <--> /dev/ttyS3 pppd: sent [LCP ConfReq id=0x1
<pcomp> <accomp>] pppd: sent [LCP ConfReq id=0x1 <pcomp> <accomp>] pppd: sent [LCP ConfReq id=0x1 <pcomp> <accomp>] pppd: sent [LCP ConfReq id=0x1 <pcomp> <accomp>] pppd: sent [LCP ConfReq id=0x1 <pcomp> <accomp>] pppd: sent [LCP ConfReq id=0x1 <pcomp> <accomp>] pppd: sent [LCP ConfReq id=0x1 <pcomp> <accomp>] pppd: sent [LCP ConfReq id=0x1 <pcomp> <accomp>] pppd: sent [LCP ConfReq id=0x1 <pcomp> <accomp>] pppd: sent [LCP ConfReq id=0x1 <pcomp> <accomp>] pppd: sent [LCP ConfReq id=0x1 <pcomp> <accomp>] pppd: sent [LCP ConfReq id=0x1 <pcomp> <accomp>] pppd: sent [LCP ConfReq id=0x1 <pcomp> <accomp>] pppd: sent [LCP ConfReq id=0x1 <pcomp> <accomp>] pppd: sent [LCP ConfReq id=0x1 <pcomp> <accomp>] pppd: sent [LCP ConfReq id=0x1 <pcomp> <accomp>] pppd: Hangup (SIGHUP) pppd: Modem hangup pppd: Connection terminated. pppd died: A modem hung up the phone (exit code 16) -----Original Message----- From: Art Fore [mailto:art_fore@3mts.com] Sent: Friday, April 26, 2002 10:31 PM To: suse-linux-e@suse.com Subject: [SLE] Cannot connect to ISP with Kinternet
I have setup the modem, etc. but when I try to dial with Kinternet, it comes up dials, connects, then sends dummy password where ISP comes back and says login/password pair mismatch.
If I dial with KPPP, it connects with no problem. How do I get Kinternet to do the correct login and password? It is selecting the correct modem etc. Also had this problem with 7.3 on the desktop, but on the laptop, it worked with 7.3. Now, the laptop comes up with same problem.
Art Fore
participants (2)
-
Art Fore
-
jaakko tamminen