Hi, I've a set of problems, which i guess are related. I use Suse 8.1 with XFree86 4.2.0, on an IBM Netvista machine. It has Intel 82810a graphic controller chipset on it. The problems are explained below. I also included parts from Sax.log & XFree86.0.log at the bottom. TIA, 1. When i try to make a Sax config. Sax sees my monitor & video card undefined. When i click Finalize at Sax, it says : (EE) Problem parsing the config file (EE) Error from xf86HandleConfigFile() I get this error everytime, even if i do no modification. 2. When i start KWinTV, these errors occur : WARNING: Your X-Server has no DGA support. WARNING: couldn't find framebuffer base address, try manual configuration ("v4l-conf -a <addr>") I can scan & find channels, i can hear sounds correctly, but can only see a black screen on each. 3. With xavtv, it's the same. Sounds ok, but screens not. Xawtv gives these errors : This is xawtv-3.76, running on Linux/i686 (2.4.19-4GB) WARNING: Your X-Server has no DGA support. WARNING: couldn't find framebuffer base address, try manual configuration ("v4l-conf -a <addr>") /root/.xawtv:15: syntax error config: invalid value for input: (null) valid choices for "input": "Television", "Composite1", "S-Video" ioctl: VIDIOCCAPTURE(on): Invalid argument ioctl: VIDIOCCAPTURE(off): Invalid argument 4. I try v4l-config to solve this framebuffer thing, but it gives these errors : v4l-conf: using X11 display :0.0 WARNING: Your X-Server has no DGA support. mode: 1024x768, depth=24, bpp=32, bpl=4096, base=unknown /dev/video0 [v4l2]: ioctl VIDIOC_QUERYCAP: Invalid argument WARNING: couldn't find framebuffer base address, try manual configuration ("v4l-conf -a <addr>") /dev/video0 [v4l]: configuration done
From SaX log :
(++) Using config file: "/var/cache/sax/files/XF86Config" Data incomplete in file /var/cache/sax/files/XF86Config Undefined InputDevice "Keyboard[0]" referenced by ServerLayout "Layout[all]". (EE) Problem parsing the config file (EE) Error from xf86HandleConfigFile() Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.99.0.log". Please report problems to feedback@suse.de. ] 30-Jan 22:38:35 <I> qx: command returned (null) string Data incomplete in file /tmp/isax-14920/XF86Config Undefined InputDevice "Keyboard[0]" referenced by ServerLayout "Layout[all]". Problem when parsing config file ..... .....
From XFree96.0.log :
ABI class: XFree86 XInput driver, version 0.3 (II) I810: Driver for Intel i810 chipset: i810, i810-dc100, i810e, i815, i830M, 845G (II) Primary Device is: PCI 00:01:0 (--) Assigning device section with no busID to primary device (--) Chipset i810e found ..... ..... (**) I810(0): Depth 24, (--) framebuffer bpp 24 (==) I810(0): RGB weight 888 (==) I810(0): Default visual is TrueColor ..... ..... (II) I810(0): e74: Using vrefresh range of 50.00-120.00 Hz (II) I810(0): Clock range: 12.00 to 136.00 MHz (II) I810(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) ..... ..... (II) I810(0): Not using default mode "1024x768" (unknown reason) (II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) ..... ..... (II) I810(0): Not using default mode "1280x1024" (hsync out of range) ..... ..... (--) I810(0): Virtual size is 1024x768 (pitch 1024) (**) I810(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz (II) I810(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (**) I810(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz (II) I810(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (**) I810(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz (II) I810(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (--) I810(0): Display dimensions: (320, 240) mm (--) I810(0): DPI set to (81, 81) ..... .....
Hi again, I've some improvements on this. I didn't get a reply yet, & don't think i can succeed on myself.. Anyway, hope someone will get on it for me soon. Here's what i've done : - I think i need DGA support _or_ framebuffer driver working. Not both. Am i wrong? - I enabled DGA support. Both Kwintv & xawtv stopped complaining about dga & Framebuffer address. - Now xawtv shows some horizontal lines on whole screen. (Not only inside the xawtv window) It seems to display the tv channels tiled, in a very bad quality. - I can change the capture setting from overlay to grabdisplay, and then displaying in the window goes fine. But performance is very bad. Sth like slow-motion. It crashes when i make it full-screen. And when i change the channel, it goes again to overlay mode.. So, can anyone tell me what my problem is? TIA, oeren@ykb.com : Hi, I've a set of problems, which i guess are related. I use Suse 8.1 with XFree86 4.2.0, on an IBM Netvista machine. It has Intel 82810a graphic controller chipset on it. The problems are explained below. I also included parts from Sax.log & XFree86.0.log at the bottom. TIA, 1. When i try to make a Sax config. Sax sees my monitor & video card undefined. When i click Finalize at Sax, it says : (EE) Problem parsing the config file (EE) Error from xf86HandleConfigFile() I get this error everytime, even if i do no modification. 2. When i start KWinTV, these errors occur : WARNING: Your X-Server has no DGA support. WARNING: couldn't find framebuffer base address, try manual configuration ("v4l-conf -a <addr>") I can scan & find channels, i can hear sounds correctly, but can only see a black screen on each. 3. With xavtv, it's the same. Sounds ok, but screens not. Xawtv gives these errors : This is xawtv-3.76, running on Linux/i686 (2.4.19-4GB) WARNING: Your X-Server has no DGA support. WARNING: couldn't find framebuffer base address, try manual configuration ("v4l-conf -a <addr>") /root/.xawtv:15: syntax error config: invalid value for input: (null) valid choices for "input": "Television", "Composite1", "S-Video" ioctl: VIDIOCCAPTURE(on): Invalid argument ioctl: VIDIOCCAPTURE(off): Invalid argument 4. I try v4l-config to solve this framebuffer thing, but it gives these errors : v4l-conf: using X11 display :0.0 WARNING: Your X-Server has no DGA support. mode: 1024x768, depth=24, bpp=32, bpl=4096, base=unknown /dev/video0 [v4l2]: ioctl VIDIOC_QUERYCAP: Invalid argument WARNING: couldn't find framebuffer base address, try manual configuration ("v4l-conf -a <addr>") /dev/video0 [v4l]: configuration done
From SaX log :
(++) Using config file: "/var/cache/sax/files/XF86Config" Data incomplete in file /var/cache/sax/files/XF86Config Undefined InputDevice "Keyboard[0]" referenced by ServerLayout "Layout[all]". (EE) Problem parsing the config file (EE) Error from xf86HandleConfigFile() Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.99.0.log". Please report problems to feedback@suse.de. ] 30-Jan 22:38:35 <I> qx: command returned (null) string Data incomplete in file /tmp/isax-14920/XF86Config Undefined InputDevice "Keyboard[0]" referenced by ServerLayout "Layout[all]". Problem when parsing config file ..... .....
From XFree96.0.log :
ABI class: XFree86 XInput driver, version 0.3 (II) I810: Driver for Intel i810 chipset: i810, i810-dc100, i810e, i815, i830M, 845G (II) Primary Device is: PCI 00:01:0 (--) Assigning device section with no busID to primary device (--) Chipset i810e found ..... ..... (**) I810(0): Depth 24, (--) framebuffer bpp 24 (==) I810(0): RGB weight 888 (==) I810(0): Default visual is TrueColor ..... ..... (II) I810(0): e74: Using vrefresh range of 50.00-120.00 Hz (II) I810(0): Clock range: 12.00 to 136.00 MHz (II) I810(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) ..... ..... (II) I810(0): Not using default mode "1024x768" (unknown reason) (II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) ..... ..... (II) I810(0): Not using default mode "1280x1024" (hsync out of range) ..... ..... (--) I810(0): Virtual size is 1024x768 (pitch 1024) (**) I810(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz (II) I810(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (**) I810(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz (II) I810(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (**) I810(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz (II) I810(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (--) I810(0): Display dimensions: (320, 240) mm (--) I810(0): DPI set to (81, 81) ..... .....
participants (1)
-
oeren＠ykb.com