Bruce.
Hello! Good to see you here from linux-users list.
Yes, I have the personal package and the manual only mentions it is not
covered., therefore I went to the SuSE Knowledge Portal and read the
mini-tutorial, part 2 on home networks.
I know how to do this with COL eD2.4, but the example given in the tutorial
is for a network that is directly connected to the net without a dial-up, which
is where I, as a newbie, am confused.. This is want I want to do. I have a
mixed linux-windoze net. I want to use my dual-boot desktop as the gateway
for the rest to the net. I have a pure COL eD2.3 server that _will not_ be going
on the net nor accessing it. I want to have a firewall to the home net at the
gateway PC and the personal firewall with 7.2 personal won't do this from
what I understand. Then I need to masq the requests to the net from the other
linux and windoze PC's as I did in eD2.4 and just need a little help in getting
tjhis done in SuSE. I am new to SuSE. Last used it at ver 6.4 (liked eD2.4 over
SUSE at that point, but for economical reasons as well as trying to learn a new
distro, have come back to it).
I have not gone through the HOW-TO's yet as they can sometimes be
" a lot to swallow", if you are a newbie. I'll give that a shot. but in the interim,
any pointers you might have would be greatly appreciated. I have learned
a lot from you on the others list(s).
Regards,
Keith B.
Bruce Marshall
On Sunday 15 July 2001 22:18, kbb0927@cs.com wrote:
I am resending this as I have not had a single response. Could someone please help!!
Keith
Have you:?
1) Read the docs that come with 7.2 2) Looked at /etc/rc.config.d/firewall.rc.config 3) Looked at the masquerading HOW-TO
+----------------------------------------------------------------------------+ + Bruce S. Marshall bmarsh@bmarsh.com Bellaire, MI 07/15/01 22:52 + +----------------------------------------------------------------------------+ "He who hesitates is probably right."
Bruce.
Hello! Good to see you here from linux-users list.
Yes, I have the personal package and the manual only mentions it is not covered., therefore I went to the SuSE Knowledge Portal and read the mini-tutorial, part 2 on home networks.
Regards,
Keith B. <snipped> For a dial-up connection to be shared via IP MasQ. I'd download the SuSEFIrewall 2 from suse.com/~marc/ Install it as directed, make sure the package IP TABLES, WVDial, and PPP
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Monday 16 July 2001 06:12 am, you ( kbb0927@cs.com ) wrote: packages are installed. Then edit your rc.config (YAST-> System Administraton -> Change Configuration File) as follows: FW_DEV_EXT/WORLD="ppp0" FW_DEV_INT="eth0" IP_DYNIP="yes" FW_MASQUERADE="yes" FW_MASQ_NETS="internel-Ip-addies/24" (I use 90.0.0.0/24) FW_ROUTE="yes" FW_STOP_KEEP_ROUTING_STATE="yes" PPPD_DOD_START="yes" START_FW2="yes" Now hit F-10 it wil run SuSEConfig, up to Network Configuration and then Configure a PPP Network. Setup WVDial as needed. THis should provide a basic Internet Connection Sharing setup with Dial On Demand. If ya get failures when it tries to make a PPP connection examine /var/log/messages for entries like modprobe unable to locate module tty-ldisc-3. If these exist then follow these instructions and then reboot. Edit your /etc/modules.conf near the end of it you should see: "alias tty-ldisc-3 ppp" Change it to: "alias tty-ldisc-3 ppp_async" "alias ppp0 ppp" Change it to: "alias ppp0 ppp_async" "alias ppp1 ppp" Change it to: "alias ppp1 ppp_async" This is done because kernel 2.4.x added improvments to the PPP modules. Now your client boxes will need to have an entry for the gateway which containes the internel IP address of the IP Masq box. If ya need feel free to email me directly as I have this running locally. Ambrosius - -- ¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ??????????????????????????????? Name: Harold aka "Ambrosius" Email: ambrosius@mailandnews.com (L)ICQ Number: 117212600 Distro: SuSE Linux 7.1 Pro Registered Linux User: 216397 ¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ??????????????????????????????? -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE7UuPQ1UIAeY3WgCcRAufUAKCG1oOrjA+R1blp2vF8TALBC5xTLgCeNqih TY1COQ9V2nIBX1Y/CNomB1I= =ApqL -----END PGP SIGNATURE-----
On Monday 16 July 2001 07:12, kbb0927@cs.com wrote:
Bruce.
Hello! Good to see you here from linux-users list.
Yes, I have the personal package and the manual only mentions it is not covered., therefore I went to the SuSE Knowledge Portal and read the mini-tutorial, part 2 on home networks. <snip> I have not gone through the HOW-TO's yet as they can sometimes be " a lot to swallow", if you are a newbie. I'll give that a shot. but in the interim, any pointers you might have would be greatly appreciated. I have learned a lot from you on the others list(s).
Regards,
Keith B.
I run 7.2 pro but I am *not* using any of SuSE's firewalls. I'm still using the IPCHAINs firewall I used under eD2.4. I plan on siwtching to iptables when the dust settles from the 7.2 install. If you want, I can send you a copy of the script I use with 7.2. If nothing else, I can answer questions you have about it. My network here is very similar to yours in that I have a mix of Win-Linux-OS/2 machines and I also have a dial-up connection to the Internet, albeit a 24/7 static IP connection. +----------------------------------------------------------------------------+ + Bruce S. Marshall bmarsh@bmarsh.com Bellaire, MI 07/16/01 09:06 + +----------------------------------------------------------------------------+ "What a nice night for an evening."
participants (3)
-
Ambrosius
-
Bruce Marshall
-
kbb0927@cs.com