Might be something with this: --- printer.c: Disabling reads from problem bidirectional printer on usblp0 printer.c: usblp0: USB Unidirectional printer dev 2 if 0 alt 1 hub.c: already running port 2 disabled by hub (EMI?), re-enabling... usb.c: USB disconnect on device 2 --- Try to change the port on the USB hub you are using. It could also be a problem with your printer. I believe you would be better off using the 2.4.x kernel with USB instead of the 2.2.19. These links have some info: http://www.qbik.ch/usb/devices/ http://www.linux-usb.org >> see the FAQ. Jostein

===== Original Message From Erik Jakobsen <erik@urbakken.dk> ===== On Friday 31 August 2001 17:38, Jostein Berntsen wrote:

...

Hi,

Hi Jostein.

...

You can run

'dmesg > boot.messages'

and post the boot.messages file here, and we'll see if we can help you.

I have done that, and here the file comes.

...

Jostein

--

----/ / _ ---/ / (_)__ __ ____ __ Med venlig hilsen - Best regards --/ /__/ / _ \/ // /\ \/ / Erik Jakobsen - erik@urbakken.dk -/____/_/_//_/\_,_/ /_/\_\ SuSE 7.2

-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq and the archives at http://lists.suse.com