Ned Rhudy wrote: Is there any way that I can set setserial up to automatically assign /dev/modem and /dev/ttyS1 UARTs of 16550A on startup? I have to input it manually for some bizarre reason, and YaST doesn't change a thing. Thank you. I had to do this too. All you have to do is go into the /sbin/init.d/ directory. And add your setserial line at the end of the 'boot.local' file. Something like "setserial /dev/modem UART 16550A" -- If /dev/modem correctly points to /dev/ttyS1 (which YaST should have done for you) then it will automagically change /dev/ttyS1 to these UARTs as well. Have fun! Ryan Kelley PS) Anyone care to try and answer my previous question 'Connecting VIA PPP' -- I have had zero answers :-( Here is my question: I recently bought SuSE 6.0. I decided to upgrade to kernel 2.2.4. Anyway to cut to the point..... The kernel upgrade went fine, and everything works great except...... My modem is on COM 3 and IRQ 10, UART 16550 (all is set correctly via setserial at boot time). I can use the modem and it works fine. However when I try to connect to my ISP via PPP I get a LCP: Config-Request timeout. I did not have this problem before the upgrade. I went ahead and upgraded to the new pppd, but it did not fix the problem :-( And PPP support is built into the kernel, and it inits ok at boot time. Any help or suggestions would be great. I am wondering if maybe the new kernel changes some of the /dev/ settings and it is making the modem not connect. But like I said, I can use minicom to dialout. -- To get out of this list, please send email to majordomo@suse.com with this text in its body: unsubscribe suse-linux-e Check out the SuSE-FAQ at <A HREF="http://www.suse.com/Support/Doku/FAQ/"><A HREF="http://www.suse.com/Support/Doku/FAQ/</A">http://www.suse.com/Support/Doku/FAQ/</A</A>> and the archive at <A HREF="http://www.suse.com/Mailinglists/suse-linux-e/index.html"><A HREF="http://www.suse.com/Mailinglists/suse-linux-e/index.html</A">http://www.suse.com/Mailinglists/suse-linux-e/index.html</A</A>>