Re: [opensuse] Re: USB modem, wvdial does not redial
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 El 2008-02-04 a las 16:04 +0530, umesh b escribió: (You forgot to email to the list).
Could you try to lift a phone from the house, to see if the line is still active after being told to hang? I mean, tell the modem to hang, then lift another phone and listen if you hear a dial tone or strange beeps and screeches.
How do i try this in this case? Its just a USB modem(data card). It supports EVDO and CDMA1x. I am told by the telco people that no voice transmission is possible. Just just a USB device.. Link below has pics of the hardware
What on earth...??? Those are not land line modems! It seems some kind of proprietary wifi. No wonder it doesn't work. I have absolutely no idea how to make that thing work. - -- Saludos Carlos E.R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4-svn0 (GNU/Linux) iD8DBQFHpu9TtTMYHG2NR9URAoxmAJ0ecA03axsHUc9+StwWSe+qnERphwCeO5SG GDIqlWUxcFhPCVRv50IXeEs= =8f3I -----END PGP SIGNATURE-----
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Carlos E. R. wrote:
El 2008-02-04 a las 16:04 +0530, umesh b escribió:
(You forgot to email to the list).
<snip>
How do i try this in this case? Its just a USB modem(data card). It supports EVDO and CDMA1x. I am told by the telco people that no voice transmission is possible. Just just a USB device.. Link below has pics of the hardware
What on earth...???
Those are not land line modems! It seems some kind of proprietary wifi. No wonder it doesn't work.
I have absolutely no idea how to make that thing work.
-- Saludos Carlos E.R.
CDMA is a Mobile (Cell phone) communication standard (not a propriety wi-fi standard). This is a connect to the network via your mobile phone type thing. CDMA is not commonly used outside US/South East Asia... Rest of the world tends to be GSM/3G. EVDO gives broadband data connectivity over CDMA... Do not think this will work on Linux yet, unless the manufacturer has a linux driver. Not enough time for someone to do the relevant reverse engineering.... - -- ============================================================================== I have always wished that my computer would be as easy to use as my telephone. My wish has come true. I no longer know how to use my telephone. Bjarne Stroustrup ============================================================================== -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFHpv4/asN0sSnLmgIRArYNAJ4zYQUCI72fR0/Xd3axtlMQme9V8QCcDSEX R1VxJA2SmqCslo3U/kp6feo= =RSJN -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
G T Smith wrote:
CDMA is a Mobile (Cell phone) communication standard (not a propriety wi-fi standard). This is a connect to the network via your mobile phone type thing. CDMA is not commonly used outside US/South East Asia... Rest of the world tends to be GSM/3G.
I'm curious which SE Asian countries use CDMA? All the ones I'm aware of use GSM. Cheers, Dave -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Monday 04 February 2008, Dave Howorth wrote:
G T Smith wrote:
CDMA is a Mobile (Cell phone) communication standard (not a propriety wi-fi standard). This is a connect to the network via your mobile phone type thing. CDMA is not commonly used outside US/South East Asia... Rest of the world tends to be GSM/3G.
I'm curious which SE Asian countries use CDMA? All the ones I'm aware of use GSM.
Dave, I have a CDMA USB modem working on my Thinkpad with openSUSE 10.2 In Indonesia there are some providers with CDMA but most of them offer GSM. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Feb 4, 2008 6:19 PM, Constant Brouerius van Nidek <constant@indo.net.id> wrote:
On Monday 04 February 2008, Dave Howorth wrote:
G T Smith wrote:
CDMA is a Mobile (Cell phone) communication standard (not a propriety wi-fi standard). This is a connect to the network via your mobile phone type thing. CDMA is not commonly used outside US/South East Asia... Rest of the world tends to be GSM/3G.
I'm curious which SE Asian countries use CDMA? All the ones I'm aware of use GSM.
Dave, I have a CDMA USB modem working on my Thinkpad with openSUSE 10.2 In Indonesia there are some providers with CDMA but most of them offer GSM.
Mr Nidek, can u tell me how it is working.. are u able to redial once u disconnect (while using wvdial)? what the steps u used to get it working? -- umesh3034 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Tuesday 05 February 2008, umesh b wrote:
On Feb 4, 2008 6:19 PM, Constant Brouerius van Nidek
<constant@indo.net.id> wrote:
On Monday 04 February 2008, Dave Howorth wrote:
G T Smith wrote:
CDMA is a Mobile (Cell phone) communication standard (not a propriety wi-fi standard). This is a connect to the network via your mobile phone type thing. CDMA is not commonly used outside US/South East Asia... Rest of the world tends to be GSM/3G.
I'm curious which SE Asian countries use CDMA? All the ones I'm aware of use GSM.
Dave, I have a CDMA USB modem working on my Thinkpad with openSUSE 10.2 In Indonesia there are some providers with CDMA but most of them offer GSM.
Mr Nidek, can u tell me how it is working.. are u able to redial once u disconnect (while using wvdial)? what the steps u used to get it working?
-- Dear Umesh,
Have to look it up but it was very simple. I am using Kinternet though which I find easier to use and with two clicks I can follow the connection attempts and and the data rate. No problems to stop and start the connection. When I find the instructions I will inform you. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Dave Howorth wrote:
G T Smith wrote:
CDMA is a Mobile (Cell phone) communication standard (not a propriety wi-fi standard). This is a connect to the network via your mobile phone type thing. CDMA is not commonly used outside US/South East Asia... Rest of the world tends to be GSM/3G.
I'm curious which SE Asian countries use CDMA? All the ones I'm aware of use GSM.
Cheers, Dave
Hate using wikipedia but the link below gives idea... http://en.wikipedia.org/wiki/IS-95... I was aware of South Korea and US, but some of the others listed are a surprise to me... - -- ============================================================================== I have always wished that my computer would be as easy to use as my telephone. My wish has come true. I no longer know how to use my telephone. Bjarne Stroustrup ============================================================================== -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFHpxfbasN0sSnLmgIRAvSXAJwNe9Je6kaULZoTc1glbd2EWj4eqgCffJ4f G3cW3cJij6aouzohshDEmbc= =kNWV -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
G T Smith wrote:
Dave Howorth wrote:
G T Smith wrote:
CDMA is a Mobile (Cell phone) communication standard (not a propriety wi-fi standard). This is a connect to the network via your mobile phone type thing. CDMA is not commonly used outside US/South East Asia... Rest of the world tends to be GSM/3G. I'm curious which SE Asian countries use CDMA? All the ones I'm aware of use GSM.
Cheers, Dave
Hate using wikipedia but the link below gives idea...
http://en.wikipedia.org/wiki/IS-95...
I was aware of South Korea and US, but some of the others listed are a surprise to me...
But none of the countries listed there are in SE Asia! :) Constant Brouerius van Nidek wrote:
Dave, I have a CDMA USB modem working on my Thinkpad with openSUSE 10.2 In Indonesia there are some providers with CDMA but most of them offer GSM.
Aha! Found one, thanks Constant. I knew there was GSM in Indonesia but didn't realize there were alternatives. Cheers, Dave -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Monday 04 February 2008, Dave Howorth wrote:
G T Smith wrote:
Dave Howorth wrote:
G T Smith wrote:
CDMA is a Mobile (Cell phone) communication standard (not a propriety wi-fi standard). This is a connect to the network via your mobile phone type thing. CDMA is not commonly used outside US/South East Asia... Rest of the world tends to be GSM/3G.
I'm curious which SE Asian countries use CDMA? All the ones I'm aware of use GSM.
Cheers, Dave
Hate using wikipedia but the link below gives idea...
http://en.wikipedia.org/wiki/IS-95...
I was aware of South Korea and US, but some of the others listed are a surprise to me...
But none of the countries listed there are in SE Asia! :)
Constant Brouerius van Nidek wrote:
Dave, I have a CDMA USB modem working on my Thinkpad with openSUSE 10.2 In Indonesia there are some providers with CDMA but most of them offer GSM.
Aha! Found one, thanks Constant. I knew there was GSM in Indonesia but didn't realize there were alternatives.
And the best part, on the box of this CDMA modem it states, O/S Supported : Windows 2000, XP, Vista & Linux Suse 10.0 Manufactured by Sungil Telecom -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Constant Brouerius van Nidek wrote:
On Monday 04 February 2008, Dave Howorth wrote:
G T Smith wrote:
Dave Howorth wrote:
G T Smith wrote:
CDMA is a Mobile (Cell phone) communication standard (not a propriety wi-fi standard). This is a connect to the network via your mobile phone type thing. CDMA is not commonly used outside US/South East Asia... Rest of the world tends to be GSM/3G.
I'm curious which SE Asian countries use CDMA? All the ones I'm aware of use GSM.
Cheers, Dave
Hate using wikipedia but the link below gives idea...
http://en.wikipedia.org/wiki/IS-95...
I was aware of South Korea and US, but some of the others listed are a surprise to me...
But none of the countries listed there are in SE Asia! :)
Constant Brouerius van Nidek wrote:
Dave, I have a CDMA USB modem working on my Thinkpad with openSUSE 10.2 In Indonesia there are some providers with CDMA but most of them offer GSM.
Aha! Found one, thanks Constant. I knew there was GSM in Indonesia but didn't realize there were alternatives.
And the best part, on the box of this CDMA modem it states, O/S Supported : Windows 2000, XP, Vista & Linux Suse 10.0
Manufactured by Sungil Telecom
Can you try, as root, hwinfo --usb and post the info. Dave -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Monday 04 February 2008 23:53:25 Dave Plater wrote:
Constant Brouerius van Nidek wrote:
On Monday 04 February 2008, Dave Howorth wrote:
G T Smith wrote:
Dave Howorth wrote:
G T Smith wrote:
CDMA is a Mobile (Cell phone) communication standard (not a propriety wi-fi standard). This is a connect to the network via your mobile phone type thing. CDMA is not commonly used outside US/South East Asia... Rest of the world tends to be GSM/3G.
I'm curious which SE Asian countries use CDMA? All the ones I'm aware of use GSM.
Cheers, Dave
Hate using wikipedia but the link below gives idea...
http://en.wikipedia.org/wiki/IS-95...
I was aware of South Korea and US, but some of the others listed are a surprise to me...
But none of the countries listed there are in SE Asia! :)
Constant Brouerius van Nidek wrote:
Dave, I have a CDMA USB modem working on my Thinkpad with openSUSE 10.2 In Indonesia there are some providers with CDMA but most of them offer GSM.
Aha! Found one, thanks Constant. I knew there was GSM in Indonesia but didn't realize there were alternatives.
And the best part, on the box of this CDMA modem it states, O/S Supported : Windows 2000, XP, Vista & Linux Suse 10.0
Manufactured by Sungil Telecom
Can you try, as root, hwinfo --usb and post the info. Dave
For your info, I am using Kinternet. My info is as follows: # hwinfo --usb 03: USB 00.0: 10a00 Hub [Created at usb.122] UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_07_2_if0 Unique ID: k4bc.6W47IPwMdd5 SysFS ID: /devices/pci0000:00/0000:00:07.2/usb1/1-0:1.0 SysFS BusID: 1-0:1.0 Hardware Class: hub Model: "Linux 2.6.22.2-ccj52-default uhci_hcd UHCI Host Controller" Hotplug: USB Vendor: "Linux 2.6.22.2-ccj52-default uhci_hcd" Device: "UHCI Host Controller" Revision: "2.06" Serial ID: "0000:00:07.2" Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic09isc00ip00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=no, avail=yes, need=no, active=unknown 04: USB 00.0: 10a00 Hub [Created at usb.122] UDI: /org/freedesktop/Hal/devices/usb_device_3eb_3301_noserial_if0 Unique ID: ADDn.hKbQSFhpkw6 Parent ID: k4bc.6W47IPwMdd5 SysFS ID: /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0 SysFS BusID: 1-1:1.0 Hardware Class: hub Model: "Atmel 4-port Hub" Hotplug: USB Vendor: usb 0x03eb "Atmel Corp." Device: usb 0x3301 "4-port Hub" Revision: "3.00" Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v03EBp3301d0300dc09dsc00dp00ic09isc00ip00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #3 (Hub) 05: USB 00.0: 10503 USB Mouse [Created at usb.122] UDI: /org/freedesktop/Hal/devices/usb_device_15ca_c3_noserial_if0 Unique ID: dwDZ.UD+3qz0WkC0 Parent ID: ADDn.hKbQSFhpkw6 SysFS ID: /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1.3/1-1.3:1.0 SysFS BusID: 1-1.3:1.0 Hardware Class: mouse Model: "USB Optical Mouse" Hotplug: USB Vendor: usb 0x15ca Device: usb 0x00c3 "USB Optical Mouse" Revision: "5.12" Compatible to: int 0x0210 0x0013 Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/mice (/dev/input/mouse1) Device Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event2, /dev/input/by-id/usb-15ca_USB_Optical_Mouse-event-mouse, /dev/input/by-path/pci-0000:00:07.2-usb-0:1.3:1.0-event-mouse, /dev/input/by-id/usb-15ca_USB_Optical_Mouse-mouse, /dev/input/by-path/pci-0000:00:07.2-usb-0:1.3:1.0-mouse Device Number: char 13:63 (char 13:33) Speed: 1.5 Mbps Module Alias: "usb:v15CAp00C3d0512dc00dsc00dp00ic03isc01ip02" Driver Info #0: Buttons: 3 Wheels: 1 XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #4 (Hub) 06: USB 00.0: 10200 Modem [Created at usb.122] UDI: /org/freedesktop/Hal/devices/usb_device_1b7d_70a_noserial_if0_serial_unknown_0 Unique ID: lfzD.gQKXOFrp8H8 Parent ID: ADDn.hKbQSFhpkw6 SysFS ID: /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1.1/1-1.1:1.0 SysFS BusID: 1-1.1:1.0 Hardware Class: modem Model: "Qualcomm CDMA Technologies MSM" Hotplug: USB Vendor: usb 0x1b7d "Qualcomm, Incorporated" Device: usb 0x070a "Qualcomm CDMA Technologies MSM" Driver: "cdc_acm" Driver Modules: "cdc_acm" Device File: /dev/ttyACM0 Speed: 12 Mbps Module Alias: "usb:v1B7Dp070Ad0000dc02dsc00dp00ic02isc02ip01" Driver Info #0: Driver Status: cdc_acm is active Driver Activation Cmd: "modprobe cdc_acm" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #4 (Hub) 07: USB 00.1: 0000 Unclassified device [Created at usb.122] UDI: /org/freedesktop/Hal/devices/usb_device_1b7d_70a_noserial_if1 Unique ID: DrDI.VRkArQ0viUB Parent ID: ADDn.hKbQSFhpkw6 SysFS ID: /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1.1/1-1.1:1.1 SysFS BusID: 1-1.1:1.1 Hardware Class: unknown Model: "Qualcomm CDMA Technologies MSM" Hotplug: USB Vendor: usb 0x1b7d "Qualcomm, Incorporated" Device: usb 0x070a "Qualcomm CDMA Technologies MSM" Driver: "cdc_acm" Driver Modules: "cdc_acm" Speed: 12 Mbps Module Alias: "usb:v1B7Dp070Ad0000dc02dsc00dp00ic0Aisc00ip00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #4 (Hub) -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Feb 5, 2008 10:29 PM, Constant Brouerius van Nidek <constant@indo.net.id> wrote:
For your info, I am using Kinternet. My info is as follows:
# hwinfo --usb
06: USB 00.0: 10200 Modem [Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1b7d_70a_noserial_if0_serial_unknown_0 Unique ID: lfzD.gQKXOFrp8H8 Parent ID: ADDn.hKbQSFhpkw6 SysFS ID: /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1.1/1-1.1:1.0 SysFS BusID: 1-1.1:1.0 Hardware Class: modem Model: "Qualcomm CDMA Technologies MSM" Hotplug: USB Vendor: usb 0x1b7d "Qualcomm, Incorporated" Device: usb 0x070a "Qualcomm CDMA Technologies MSM" Driver: "cdc_acm" Driver Modules: "cdc_acm" Device File: /dev/ttyACM0 Speed: 12 Mbps Module Alias: "usb:v1B7Dp070Ad0000dc02dsc00dp00ic02isc02ip01" Driver Info #0: Driver Status: cdc_acm is active Driver Activation Cmd: "modprobe cdc_acm" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #4 (Hub)
07: USB 00.1: 0000 Unclassified device [Created at usb.122] UDI: /org/freedesktop/Hal/devices/usb_device_1b7d_70a_noserial_if1 Unique ID: DrDI.VRkArQ0viUB Parent ID: ADDn.hKbQSFhpkw6 SysFS ID: /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1.1/1-1.1:1.1 SysFS BusID: 1-1.1:1.1 Hardware Class: unknown Model: "Qualcomm CDMA Technologies MSM" Hotplug: USB Vendor: usb 0x1b7d "Qualcomm, Incorporated" Device: usb 0x070a "Qualcomm CDMA Technologies MSM" Driver: "cdc_acm" Driver Modules: "cdc_acm" Speed: 12 Mbps Module Alias: "usb:v1B7Dp070Ad0000dc02dsc00dp00ic0Aisc00ip00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #4 (Hub)
Hi Nidek, I can see 2 USB Qualcomm CDMA device in the hwinfo, which one are u using as the modem here? My hwinfo is given below : ======================= 12: USB 00.0: 0000 Unclassified device [Created at usb.122] UDI: /org/freedesktop/Hal/devices/usb_device_5c6_6000_noserial_if0 Unique ID: mZxt.PmV7noyU267 Parent ID: uIhY.o51ScQgU3Z5 SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.0 SysFS BusID: 3-2:1.0 Hardware Class: unknown Model: "Qualcomm ZTE CDMA Tech" Hotplug: USB Vendor: usb 0x05c6 "Qualcomm, Inc." Device: usb 0x6000 "ZTE CDMA Tech" Speed: 12 Mbps Module Alias: "usb:v05C6p6000d0000dc00dsc00dp00icFFiscFFipFF" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #5 (Hub) ===================== I was also using kinternet, but the same problem was happening with kinternet. I can connect the first time, and then disconnect. But the second time the modem doest respond. So i tried using wvdial. Below are the steps i use to bring up the module modprobe -v usbserial vendor=0x05c6 product=0x6000 smpppd Then use kinternet or wvdial to dial out My device is /dev/ttyUSB0 Regards -- umesh3034 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Feb 5, 2008 11:33 PM, umesh b <umesh.kollam@gmail.com> wrote:
I can see 2 USB Qualcomm CDMA device in the hwinfo, which one are u using as the modem here? My hwinfo is given below : ======================= 12: USB 00.0: 0000 Unclassified device [Created at usb.122] UDI: /org/freedesktop/Hal/devices/usb_device_5c6_6000_noserial_if0 Unique ID: mZxt.PmV7noyU267 Parent ID: uIhY.o51ScQgU3Z5 SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.0 SysFS BusID: 3-2:1.0 Hardware Class: unknown Model: "Qualcomm ZTE CDMA Tech" Hotplug: USB Vendor: usb 0x05c6 "Qualcomm, Inc." Device: usb 0x6000 "ZTE CDMA Tech" Speed: 12 Mbps Module Alias: "usb:v05C6p6000d0000dc00dsc00dp00icFFiscFFipFF" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #5 (Hub) =====================
I was also using kinternet, but the same problem was happening with kinternet. I can connect the first time, and then disconnect. But the second time the modem doest respond. So i tried using wvdial. Below are the steps i use to bring up the module
modprobe -v usbserial vendor=0x05c6 product=0x6000 smpppd
Then use kinternet or wvdial to dial out
My device is /dev/ttyUSB0
I was searching through the net and found that i needed to modprobe a cdc-acm module for a USB CDMA modems to work correctly, just the usbserial module will not work. so i did a modprobe to insmod this module. modprobe -v cdc-acm After this i inserted the USB modem. As per the net info, this time the USB should be bounded to the device /dev/ttyACM0 (as per tail -f /var/log/messages) but nothing has happened . Does anyone has any info as to how to make this module work? Do we have to remove the other usb modules that might be interfering? -- umesh3034 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Can you try, as root, hwinfo --usb and post the info. Dave
Below is the hwinfo --usb ============================================== 12: USB 00.0: 0000 Unclassified device [Created at usb.122] UDI: /org/freedesktop/Hal/devices/usb_device_5c6_6000_noserial_if0 Unique ID: mZxt.PmV7noyU267 Parent ID: uIhY.o51ScQgU3Z5 SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.0 SysFS BusID: 3-2:1.0 Hardware Class: unknown Model: "Qualcomm ZTE CDMA Tech" Hotplug: USB Vendor: usb 0x05c6 "Qualcomm, Inc." Device: usb 0x6000 "ZTE CDMA Tech" Speed: 12 Mbps Module Alias: "usb:v05C6p6000d0000dc00dsc00dp00icFFiscFFipFF" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #5 (Hub) ============================================ -- umesh3034 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
participants (6)
-
Carlos E. R. -
Constant Brouerius van Nidek -
Dave Howorth -
Dave Plater -
G T Smith -
umesh b