Will suse now support the LSB run levels by default ? 0 halt 1 single user mode 2 multiuser with no remote networking 3 normal/full multiuser 4 reserved for local use, default is normal/full multiuser 5 xdm or equivalent 6 reboot dids
Yes (and there was much rejoicing!)
Will suse now support the LSB run levels by default ? 0 halt 1 single user mode 2 multiuser with no remote networking 3 normal/full multiuser 4 reserved for local use, default is normal/full multiuser 5 xdm or equivalent 6 reboot
-- James Ogley, Network Manager, SuSE Linux Ltd - +44 (0) 20 8 387 4088 @ Work: ogley@suse.co.uk http://www.suse.co.uk @ Home: james@rubberturnip.org.uk http://www.rubberturnip.org.uk @ Mobile: riggwelter@sms.genie.co.uk ICQ: 57374251 Slashdot: riggwelter (84180) asylum-mud.org: Riggwelter "I lift up my eyes to the hills, from where does my help come?"
This is an excerpt from /etc/inittab on SuSE 7.0: # runlevel 0 is halt # runlevel S is single-user # runlevel 1 is multi-user without network # runlevel 2 is multi-user with network # runlevel 3 is multi-user with network and xdm # runlevel 6 is reboot What difference do we see ? Yes, there isn't a special runlevel for XDM. And to my opinion, there shouldn't be. Wasting a runlevel for XDM implies to simpletons that a runlevel could be wasted for anything. Why not runlevel 4 for databases ? Or runlevel 7 just for fun ? Using runlevel 5 for XDM is the RedHat way, and one of my reasons for initially liking SuSE for it's to-the-point way of thinking. -tosi On Thu, Feb 08, 2001 at 02:21:02PM -0000, dids wrote:
Will suse now support the LSB run levels by default ?
0 halt 1 single user mode 2 multiuser with no remote networking 3 normal/full multiuser 4 reserved for local use, default is normal/full multiuser 5 xdm or equivalent 6 reboot
dids
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq
-- ______ /---------------------------------------\ \ | Þór Sigurðsson | Tor Sigurdsson | t | | Netmaður | Network Specialist | o | |-----------------------------------------| s | | tosi@rhi.hi.is | i | \---------------------------------------/_____/
Yes,
From what I have learnt, 7.1 now supports the LSB runlevels and rc scripts now reside in /etc/init.d with /sbin/init.d and /etc/rc.d symlinks to it for backward compatibility.
Cheers, -- Nadeem Hasan nhasan@nadmm.com http://www.nadmm.com/ dids wrote:
Will suse now support the LSB run levels by default ?
0 halt 1 single user mode 2 multiuser with no remote networking 3 normal/full multiuser 4 reserved for local use, default is normal/full multiuser 5 xdm or equivalent 6 reboot
dids
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq
On Thu, 8 Feb 2001, dids wrote:
Will suse now support the LSB run levels by default ?
0 halt 1 single user mode 2 multiuser with no remote networking 3 normal/full multiuser 4 reserved for local use, default is normal/full multiuser 5 xdm or equivalent 6 reboot
Yes.
From our 7.1 inittab: # /etc/init.d/rc takes care of runlevel handling # # runlevel 0 is System halt (Do never use this for initdefault) # runlevel 1 is Single user mode # runlevel 2 is Local multiuser without remote network (e.g. NFS) # runlevel 3 is Full multiuser with network # runlevel 4 is Not used # runlevel 5 is Full multiuser with network and xdm # runlevel 6 is System reboot (Do never use this for initdefault)
Anas
dids
-- Anas Nashif <nashif at suse.de> SuSE GmbH, Nuremberg, Germany
* dids (richard@diddyland.com) [20010208 15:15]:
Will suse now support the LSB run levels by default ?
0 halt 1 single user mode 2 multiuser with no remote networking 3 normal/full multiuser 4 reserved for local use, default is normal/full multiuser 5 xdm or equivalent 6 reboot
This is from /etc/inittab of 7.1: # /etc/init.d/rc takes care of runlevel handling # # runlevel 0 is System halt (Do never use this for initdefault) # runlevel 1 is Single user mode # runlevel 2 is Local multiuser without remote network (e.g. NFS) # runlevel 3 is Full multiuser with network # runlevel 4 is Not used # runlevel 5 is Full multiuser with network and xdm # runlevel 6 is System reboot (Do never use this for initdefault) Notice the similarity ? ;-))))))))) Philipp -- Penguins shall save the dinosaurs -- Handelsblatt about Linux on S/390
looking at my old notes from the 1980's runlevel 4 was full multi-user with
network no X on Server, made sense then when you think of hardware.
scsijon
----- Original Message -----
From: "Philipp Thomas"
* dids (richard@diddyland.com) [20010208 15:15]:
Will suse now support the LSB run levels by default ?
0 halt 1 single user mode 2 multiuser with no remote networking 3 normal/full multiuser 4 reserved for local use, default is normal/full multiuser 5 xdm or equivalent 6 reboot
This is from /etc/inittab of 7.1:
# /etc/init.d/rc takes care of runlevel handling # # runlevel 0 is System halt (Do never use this for initdefault) # runlevel 1 is Single user mode # runlevel 2 is Local multiuser without remote network (e.g. NFS) # runlevel 3 is Full multiuser with network # runlevel 4 is Not used # runlevel 5 is Full multiuser with network and xdm # runlevel 6 is System reboot (Do never use this for initdefault)
Notice the similarity ? ;-)))))))))
Philipp
-- Penguins shall save the dinosaurs -- Handelsblatt about Linux on S/390
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq
participants (7)
-
dids -
James Ogley -
Nadeem Hasan -
nashif＠suse.de -
Philipp Thomas -
scsijon -
Tor Sigurdsson