[opensuse] Packman's k3b not writing DVDs correctly
I'm running openSUSE 10.2 on two different 64-bit machines. When I run the current packman version of k3b to burn a DVD iso, I get a checksum error on 'verify written data'. I also tried different media. Same error. I turned off packman and re-installed the distribution version 0.12.17-31. It works but gives me the pesky 'run K3bSetup' message and K3bSetup doesn't exist. Any suggestions? -- Bob -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On 1/19/07, Bob Ewart
I'm running openSUSE 10.2 on two different 64-bit machines.
When I run the current packman version of k3b to burn a DVD iso, I get a checksum error on 'verify written data'. I also tried different media. Same error.
I turned off packman and re-installed the distribution version 0.12.17-31. It works but gives me the pesky 'run K3bSetup' message and K3bSetup doesn't exist.
Any suggestions?
-- Bob
k3b uses growisofs under the hood to burn DVDs. So most probably the problem is either with the growisofs, or is just with the compare routine of k3b. Try to calculate md5 sums manually from the media to check. Or use dd if=/dev/dvd of=new.iso and compare new.iso with the iso file you burned. -- Svetoslav Milenov (Sunny) Even the most advanced equipment in the hands of the ignorant is just a pile of scrap. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Sunny wrote:
On 1/19/07, Bob Ewart
wrote: I'm running openSUSE 10.2 on two different 64-bit machines.
When I run the current packman version of k3b to burn a DVD iso, I get a checksum error on 'verify written data'. I also tried different media. Same error.
I turned off packman and re-installed the distribution version 0.12.17-31. It works but gives me the pesky 'run K3bSetup' message and K3bSetup doesn't exist.
Any suggestions?
-- Bob
k3b uses growisofs under the hood to burn DVDs. So most probably the problem is either with the growisofs, or is just with the compare routine of k3b.
Try to calculate md5 sums manually from the media to check.
Or use dd if=/dev/dvd of=new.iso and compare new.iso with the iso file you burned.
I did not change growisofs, it's still appears to be the packman version. Earlier I used k3b to do a 'copy dvd'->create an image only. The image's checksum did not match the original's. I just did the dd ... you suggested and new.iso did not match the original (it quit very quickly.) New.iso did match the image I did earlier. As near as I can tell, only k3b has changed. The distribution version works, packman's does not. There seems to be a comment on k3b in the packman mailing list archives, but my german isn't up to it anymore. -- Bob -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
I'm running openSUSE 10.2 on two different 64-bit machines.
When I run the current packman version of k3b to burn a DVD iso, I get a checksum error on 'verify written data'. I also tried different media. Same error.
I turned off packman and re-installed the distribution version 0.12.17-31. It works but gives me the pesky 'run K3bSetup' message and K3bSetup doesn't exist.
Any suggestions?
-- Bob I have this same problem on OpenSUSE 10.2 . I just noticed that my version from k3b 1.0 rc4. has there been a stable release/ I notice my update says
On Friday January 19 2007 08:43, Bob Ewart wrote: there is a update I need to check it out. -- Russ -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
russbucket wrote:
I'm running openSUSE 10.2 on two different 64-bit machines.
When I run the current packman version of k3b to burn a DVD iso, I get a checksum error on 'verify written data'. I also tried different media. Same error.
I turned off packman and re-installed the distribution version 0.12.17-31. It works but gives me the pesky 'run K3bSetup' message and K3bSetup doesn't exist.
Any suggestions?
-- Bob I have this same problem on OpenSUSE 10.2 . I just noticed that my version from k3b 1.0 rc4. has there been a stable release/ I notice my update says
On Friday January 19 2007 08:43, Bob Ewart wrote: there is a update I need to check it out.
The k3b site says that the release candidate 4 for 1.0 was released on 9 January. That's the same date as packman's k3b-0.99.1.0rc4-100.pm.1.x86_64.rpm, so I guess that they're the same. The http://www.k3b.org feedback page shows some more comments about this problem. I'll add my 2 cents worth there. At this point it looks like a problem with the release candidate from k3b. -- Bob -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Bob, I spent two weeks with the same problem you have. Now is working perfect and I do not know what caused the problem. I will not tell you what I tried because I tried everything that came to my mind or other users suggested. I believe the problem was with growisofs. Try it from the CLI. What is working now is: K3b 1.0rc4 growisofs 7.0 and be sure you have the window codecs and libdvdcss-1.2.9. If I can help you please post it. I know how do you feel. I was ready to dump SUSE 10.2. Try to burn a small file to a dvd and see if it works. It it does the problem may be with the image. In my case I could not burn anything neither with k3b or growisofs. Regards, -=terry(Denver)=- On Fri, 2007-01-19 at 11:43 -0500, Bob Ewart wrote:
I'm running openSUSE 10.2 on two different 64-bit machines.
When I run the current packman version of k3b to burn a DVD iso, I get a checksum error on 'verify written data'. I also tried different media. Same error.
I turned off packman and re-installed the distribution version 0.12.17-31. It works but gives me the pesky 'run K3bSetup' message and K3bSetup doesn't exist.
Any suggestions?
-- Bob
-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Teruel de Campo MD wrote:
Bob,
I spent two weeks with the same problem you have. Now is working perfect and I do not know what caused the problem. I will not tell you what I tried because I tried everything that came to my mind or other users suggested. I believe the problem was with growisofs. Try it from the CLI.
What is working now is:
K3b 1.0rc4 growisofs 7.0
and be sure you have the window codecs and libdvdcss-1.2.9. If I can help you please post it. I know how do you feel. I was ready to dump SUSE 10.2.
Try to burn a small file to a dvd and see if it works. It it does the problem may be with the image. In my case I could not burn anything neither with k3b or growisofs.
Regards,
-=terry(Denver)=-
On Fri, 2007-01-19 at 11:43 -0500, Bob Ewart wrote:
I'm running openSUSE 10.2 on two different 64-bit machines.
When I run the current packman version of k3b to burn a DVD iso, I get a checksum error on 'verify written data'. I also tried different media. Same error.
I turned off packman and re-installed the distribution version 0.12.17-31. It works but gives me the pesky 'run K3bSetup' message and K3bSetup doesn't exist.
Any suggestions?
-- Bob
Hi Terry, I am using growisofs 7.0. I'm not trying to copy audio/video DVDs. I was trying to write a distribution's DVD from an iso file that I downloaded. The codecs and libdvdcss shouldn't be needed. Try downloading a DVD iso file from openSUSE and writing it. According to comments on the k3b.org site, the 'verify written data' option won't work with RC4. The written DVD does not match the iso file you created it from. I'll wait for the next release of k3b and try again then. For now, I'm happy with 0.12.17-31. -- Bob -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
participants (4)
-
Bob Ewart
-
russbucket
-
Sunny
-
Teruel de Campo MD