I have downloaded Opensuse 10.0 and I did a clean install, but to my surprise my sound does not work. I have a Via Vt8233 AC 97 controller. When I try to install my sound card with Yast, I get a message telling me that module snd-via82xx was not able to load. I have had some problem as this earlier, but after a reboot, I was able to fix it, but not this time. Gunnar
Am Donnerstag, 13. Oktober 2005 12:24 schrieb Gunnar Håland:
I have downloaded Opensuse 10.0 and I did a clean install, but to my surprise my sound does not work. I have a Via Vt8233 AC 97 controller. When I try to install my sound card with Yast, I get a message telling me that module snd-via82xx was not able to load. I have had some problem as this earlier, but after a reboot, I was able to fix it, but not this time.
Hi Gunnar, check if another sound module is loaded and try to unload it, before you go to YaST. -- mdc
meister@netz00.com wrote:
Am Donnerstag, 13. Oktober 2005 12:24 schrieb Gunnar Håland:
I have downloaded Opensuse 10.0 and I did a clean install, but to my surprise my sound does not work. I have a Via Vt8233 AC 97 controller. When I try to install my sound card with Yast, I get a message telling me that module snd-via82xx was not able to load. I have had some problem as this earlier, but after a reboot, I was able to fix it, but not this time.
Hi Gunnar,
check if another sound module is loaded and try to unload it, before you go to YaST.
-- mdc
--------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-unsubscribe@opensuse.org For additional commands, e-mail: opensuse-help@opensuse.org
Hmmm, how do I do That. If I use Alsaconf the sound work, but when I reboot next time, no sound Gunnar
Am Freitag, 14. Oktober 2005 06:50 schrieb Gunnar Håland:
meister@netz00.com wrote:
check if another sound module is loaded and try to unload it, before you go to YaST. Hmmm, how do I do That. If I use Alsaconf the sound work, but when I reboot next time, no sound Gunnar
Hi Gunnar, "lsmod" Do it once before running alsaconf and afterwarts. Compare both lists. BTW: the service "alsa" is started in the runlevel editor ? -- mdc
meister@netz00.com wrote:
Am Freitag, 14. Oktober 2005 06:50 schrieb Gunnar Håland:
meister@netz00.com wrote:
check if another sound module is loaded and try to unload it, before you go to YaST. Hmmm, how do I do That. If I use Alsaconf the sound work, but when I reboot next time, no sound Gunnar
Hi Gunnar,
"lsmod" Do it once before running alsaconf and afterwarts. Compare both lists. BTW: the service "alsa" is started in the runlevel editor ?
-- mdc
--------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-unsubscribe@opensuse.org For additional commands, e-mail: opensuse-help@opensuse.org
"lsmod" return:
Module Size Used by snd_via82xx 28096 0 snd_ac97_codec 90876 1 snd_via82xx snd_ac97_bus 2432 1 snd_ac97_codec snd_pcm 93064 2 snd_via82xx,snd_ac97_codec snd_timer 24452 1 snd_pcm snd_mpu401_uart 7296 1 snd_via82xx snd_rawmidi 24864 1 snd_mpu401_uart snd_seq_device 8588 1 snd_rawmidi snd 60420 7 snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device gameport 14600 1 snd_via82xx snd_page_alloc 10632 2 snd_via82xx,snd_pcm soundcore 9184 1 snd iptable_filter 2816 0 ip_tables 19456 1 iptable_filter nvidia 3695884 12 hfsplus 75140 0 subfs 7552 1 speedstep_lib 4228 0 freq_table 4612 0 ipv6 242752 12 af_packet 21384 2 edd 9824 0 usbhid 43616 0 usblp 12544 0 8139too 26112 0 mii 5504 1 8139too i2c_viapro 8080 0 i2c_core 20368 1 i2c_viapro via_ircc 22164 0 irda 115000 1 via_ircc crc_ccitt 2176 1 irda uhci_hcd 32016 0 usbcore 112640 4 usbhid,usblp,uhci_hcd via_agp 9472 1 agpgart 33096 2 nvidia,via_agp pci_hotplug 26164 0 generic 4484 0 [permanent] parport_pc 38980 1 lp 11460 0 parport 33864 2 parport_pc,lp nls_iso8859_1 4096 2 nls_cp437 5760 2 vfat 12800 2 fat 49692 1 vfat dm_mod 54972 0 reiserfs 250480 1 ide_cd 39684 0 cdrom 36896 1 ide_cd processor 24252 0 via82cxxx 13212 0 [permanent] ide_disk 17152 6 ide_core 122380 4 gen
And Yast will not configure my soundcard, only alsacconf, and I have to run alsaconf after a reboot. I have tried to delet /etc/modprobe.d/sound, but this does not help. Gunnar
Gunnar Håland wrote:
meister@netz00.com wrote:
Am Freitag, 14. Oktober 2005 06:50 schrieb Gunnar Håland:
meister@netz00.com wrote:
check if another sound module is loaded and try to unload it, before you go to YaST. Hmmm, how do I do That. If I use Alsaconf the sound work, but when I reboot next time, no sound Gunnar
Hi Gunnar,
"lsmod" Do it once before running alsaconf and afterwarts. Compare both lists. BTW: the service "alsa" is started in the runlevel editor ?
-- mdc
--------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-unsubscribe@opensuse.org For additional commands, e-mail: opensuse-help@opensuse.org
"lsmod" return:
Module Size Used by snd_via82xx 28096 0 snd_ac97_codec 90876 1 snd_via82xx snd_ac97_bus 2432 1 snd_ac97_codec snd_pcm 93064 2 snd_via82xx,snd_ac97_codec snd_timer 24452 1 snd_pcm snd_mpu401_uart 7296 1 snd_via82xx snd_rawmidi 24864 1 snd_mpu401_uart snd_seq_device 8588 1 snd_rawmidi snd 60420 7 snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
gameport 14600 1 snd_via82xx
After alsaconf and working sound it gives: snd_seq 51984 0 snd_via82xx 28096 3 snd_ac97_codec 90876 1 snd_via82xx snd_ac97_bus 2432 1 snd_ac97_codec snd_pcm 93064 4 snd_pcm_oss,snd_via82xx,snd_ac97_codec snd_timer 24452 2 snd_seq,snd_pcm snd_mpu401_uart 7296 1 snd_via82xx snd_rawmidi 24864 1 snd_mpu401_uart snd_seq_device 8588 2 snd_seq,snd_rawmidi snd 60420 15 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device gameport 14600 1 snd_via82xx snd_page_alloc 10632 2 snd_via82xx,snd_pcm soundcore 9184 1 snd iptable_filter 2816 0 ip_tables 19456 1 iptable_filter nvidia 3695884 12 hfsplus 75140 0 subfs 7552 1 speedstep_lib 4228 0 freq_table 4612 0 ipv6 242752 12 af_packet 21384 2 edd 9824 0 usbhid 43616 0 usblp 12544 0 8139too 26112 0 mii 5504 1 8139too i2c_viapro 8080 0 i2c_core 20368 1 i2c_viapro via_ircc 22164 0 irda 115000 1 via_ircc crc_ccitt 2176 1 irda uhci_hcd 32016 0 usbcore 112640 4 usbhid,usblp,uhci_hcd via_agp 9472 1 agpgart 33096 2 nvidia,via_agp pci_hotplug 26164 0 generic 4484 0 [permanent] parport_pc 38980 1 lp 11460 0 parport 33864 2 parport_pc,lp nls_iso8859_1 4096 2 nls_cp437 5760 2 vfat 12800 2 fat 49692 1 vfat dm_mod 54972 0 reiserfs 250480 1 ide_cd 39684 0 cdrom 36896 1 ide_cd processor 24252 0 via82cxxx 13212 0 [permanent] ide_disk 17152 6 ide_core 122380 4 generic,ide_cd,via82cxxx,ide_disk Gunnar
Am Freitag, 14. Oktober 2005 19:30 schrieb Gunnar Håland:
Gunnar Håland wrote:
meister@netz00.com wrote:
check if another sound module is loaded and try to unload it, before you go to YaST. "lsmod" Do it once before running alsaconf and afterwarts. Compare both lists. BTW: the service "alsa" is started in the runlevel editor ? "lsmod" return: Module Size Used by snd_via82xx 28096 0 snd_ac97_codec 90876 1 snd_via82xx snd_ac97_bus 2432 1 snd_ac97_codec snd_pcm 93064 2 snd_via82xx,snd_ac97_codec snd_timer 24452 1 snd_pcm snd_mpu401_uart 7296 1 snd_via82xx snd_rawmidi 24864 1 snd_mpu401_uart snd_seq_device 8588 1 snd_rawmidi snd 60420 7 snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_r awmidi,snd_seq_device
gameport 14600 1 snd_via82xx
After alsaconf and working sound it gives:
This list is incomplete: snd_pcm_oss, snd_mixer_oss are used by snd, but not listed. Sure you copied the full list?
snd_seq 51984 0 snd_via82xx 28096 3 snd_ac97_codec 90876 1 snd_via82xx snd_ac97_bus 2432 1 snd_ac97_codec snd_pcm 93064 4 snd_pcm_oss,snd_via82xx,snd_ac97_codec snd_timer 24452 2 snd_seq,snd_pcm snd_mpu401_uart 7296 1 snd_via82xx snd_rawmidi 24864 1 snd_mpu401_uart snd_seq_device 8588 2 snd_seq,snd_rawmidi snd 60420 15 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_via82xx,snd_ac97_codec,snd_pcm, snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device gameport 14600 1 snd_via82xx snd_page_alloc 10632 2 snd_via82xx,snd_pcm soundcore 9184 1 snd
It seems that alsa is not working properly, but OSS seems to work. Try to load snd_pcm_oss and snd_mixer_oss in /etc/modprobe.d/sound directly. -- mdc
meister@netz00.com wrote:
Am Freitag, 14. Oktober 2005 19:30 schrieb Gunnar Håland:
Gunnar Håland wrote:
meister@netz00.com wrote:
check if another sound module is loaded and try to unload it, before you go to YaST. "lsmod" Do it once before running alsaconf and afterwarts. Compare both lists. BTW: the service "alsa" is started in the runlevel editor ? "lsmod" return: Module Size Used by snd_via82xx 28096 0 snd_ac97_codec 90876 1 snd_via82xx snd_ac97_bus 2432 1 snd_ac97_codec snd_pcm 93064 2 snd_via82xx,snd_ac97_codec snd_timer 24452 1 snd_pcm snd_mpu401_uart 7296 1 snd_via82xx snd_rawmidi 24864 1 snd_mpu401_uart snd_seq_device 8588 1 snd_rawmidi snd 60420 7 snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_r awmidi,snd_seq_device
gameport 14600 1 snd_via82xx After alsaconf and working sound it gives:
This list is incomplete: snd_pcm_oss, snd_mixer_oss are used by snd, but not listed. Sure you copied the full list?
snd_seq 51984 0 snd_via82xx 28096 3 snd_ac97_codec 90876 1 snd_via82xx snd_ac97_bus 2432 1 snd_ac97_codec snd_pcm 93064 4 snd_pcm_oss,snd_via82xx,snd_ac97_codec snd_timer 24452 2 snd_seq,snd_pcm snd_mpu401_uart 7296 1 snd_via82xx snd_rawmidi 24864 1 snd_mpu401_uart snd_seq_device 8588 2 snd_seq,snd_rawmidi snd 60420 15 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_via82xx,snd_ac97_codec,snd_pcm, snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device gameport 14600 1 snd_via82xx snd_page_alloc 10632 2 snd_via82xx,snd_pcm soundcore 9184 1 snd
It seems that alsa is not working properly, but OSS seems to work. Try to load snd_pcm_oss and snd_mixer_oss in /etc/modprobe.d/sound directly.
-- mdc
--------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-unsubscribe@opensuse.org For additional commands, e-mail: opensuse-help@opensuse.org
The full list is in my reply above . Alsa is enabled in runlevel, but Via82xx is not there if a do a "lsmod". when I does a "modprobe via82xx" and run alsaconf yhe sound is working, but only to the next reboot, yes I shut my computer of. Gunnar
Am Samstag, 15. Oktober 2005 06:53 schrieb Gunnar Håland:
meister@netz00.com wrote:
Am Freitag, 14. Oktober 2005 19:30 schrieb Gunnar Håland:
Gunnar Håland wrote:
meister@netz00.com wrote:
snd_via82xx 28096 0 snd_via82xx 28096 3 The full list is in my reply above . Alsa is enabled in runlevel, but Via82xx is not there if a do a "lsmod". when I does a "modprobe via82xx" and run alsaconf yhe sound is working, but only to the next reboot, yes I shut my computer of.
modprobe via82xx will give you an error: there is no module of this name. And the module snd_via82xx is shown in both listings you sent. -- mdc
meister@netz00.com wrote:
Am Samstag, 15. Oktober 2005 06:53 schrieb Gunnar Håland:
meister@netz00.com wrote:
Am Freitag, 14. Oktober 2005 19:30 schrieb Gunnar Håland:
Gunnar Håland wrote:
meister@netz00.com wrote:
snd_via82xx 28096 0 snd_via82xx 28096 3 The full list is in my reply above . Alsa is enabled in runlevel, but Via82xx is not there if a do a "lsmod". when I does a "modprobe via82xx" and run alsaconf yhe sound is working, but only to the next reboot, yes I shut my computer of.
modprobe via82xx will give you an error: there is no module of this name. And the module snd_via82xx is shown in both listings you sent.
-- mdc
--------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-unsubscribe@opensuse.org For additional commands, e-mail: opensuse-help@opensuse.org
If i do "modprobe wia82xx", I get no error, and it does not tell me that the modul is already loaded. Gunnar
Hi, On Sat, 15 Oct 2005, Gunnar Håland wrote:
Alsa is enabled in runlevel, but Via82xx is not there if a do a "lsmod". when I does a "modprobe via82xx" and run alsaconf yhe sound is working, but only to the next reboot, yes I shut my computer of.
alsasound is not working here, too. Turion64 notebook with ATI chips. I added "modprobe snd_atiixp" into /etc/init.d/alsasound like this: ... # See how we were called. case "$1" in start) modprobe snd_atiixp if [ -d /proc/asound ]; then start_rest fi ;; ... and that made it work. Cheers -e -- Eberhard Moenkeberg (emoenke@gwdg.de, em@kki.org)
alsasound is not working here, too. Turion64 notebook with ATI chips. I added "modprobe snd_atiixp" into /etc/init.d/alsasound like this:
... # See how we were called. case "$1" in start) modprobe snd_atiixp if [ -d /proc/asound ]; then start_rest fi ;; ...
and that made it work. Same for me. I use this more general hack: case "$1" in # start) # if [ -d /proc/asound ]; then # start_rest # fi # ;; ... start|reload|restart) $0 unload echo -n "Starting sound driver" load_modules && start_rest # hack - in case the mixer isn't restored (sleep 1; $alsactl -f $asoundcfg restore) rc_status ;;
Hans-Peter BTW: Same behaviour in opensuse 10.1 Alpha1 (alsa-1.0.9-25)
Hans-Peter Holler wrote:
alsasound is not working here, too. Turion64 notebook with ATI chips. I added "modprobe snd_atiixp" into /etc/init.d/alsasound like this:
... # See how we were called. case "$1" in start) modprobe snd_atiixp if [ -d /proc/asound ]; then start_rest fi ;; ...
and that made it work. Same for me. I use this more general hack: case "$1" in # start) # if [ -d /proc/asound ]; then # start_rest # fi # ;; ... start|reload|restart) $0 unload echo -n "Starting sound driver" load_modules && start_rest # hack - in case the mixer isn't restored (sleep 1; $alsactl -f $asoundcfg restore) rc_status ;;
Hans-Peter
BTW: Same behaviour in opensuse 10.1 Alpha1 (alsa-1.0.9-25)
--------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-unsubscribe@opensuse.org For additional commands, e-mail: opensuse-help@opensuse.org
Somehow I think this did it. After a reboot I have sound. But can someone tell me why Yast and Opensuse does not like my soundcard anymore. Gunnar
Gunnar Håland wrote:
Hans-Peter Holler wrote:
alsasound is not working here, too. Turion64 notebook with ATI chips. I added "modprobe snd_atiixp" into /etc/init.d/alsasound like this:
... # See how we were called. case "$1" in start) modprobe snd_atiixp if [ -d /proc/asound ]; then start_rest fi ;; ...
and that made it work. Same for me. I use this more general hack: case "$1" in # start) # if [ -d /proc/asound ]; then # start_rest # fi # ;; ... start|reload|restart) $0 unload echo -n "Starting sound driver" load_modules && start_rest # hack - in case the mixer isn't restored (sleep 1; $alsactl -f $asoundcfg restore) rc_status ;;
Hans-Peter
BTW: Same behaviour in opensuse 10.1 Alpha1 (alsa-1.0.9-25)
--------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-unsubscribe@opensuse.org For additional commands, e-mail: opensuse-help@opensuse.org
Somehow I think this did it. After a reboot I have sound. But can someone tell me why Yast and Opensuse does not like my soundcard anymore. Gunnar
--------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-unsubscribe@opensuse.org For additional commands, e-mail: opensuse-help@opensuse.org
No it did not. This morning the sound is still missing. hmmmmmmm. Gunnar
Gunnar Håland wrote:
Hmmm, how do I do That. If I use Alsaconf the sound work, but when I reboot next time, no sound
I used Davids method of deleting /etc/modprobe.d/sound before letting YaST configure the sound device again when it was not working on my laptop after upgrading from 9.3 to 10.0. -- Guðlaugur Jóhannesson http://www.hi.is/~gudlaugu Phone: +354 849 8405
participants (5)
-
Eberhard Moenkeberg -
Gunnar Håland -
Guðlaugur Jóhannesson -
Hans-Peter Holler -
meister＠netz00.com