Hi, having a problem logging back in as a user on my 10.1 box. Had this problem once before on 9.3 or 10.0 cant remember which, but it was because the home dir was full. Not the case this time as you can see below. signed in as root, changed my user login to auto, and and no password, tried it both ways, it still tries to login, then goes back to the login screen. I can only login as root. Would anyone have any ideas? Thanks so much. linux-steve:~ # df -h Filesystem Size Used Avail Use% Mounted on /dev/hda2 21G 6.6G 14G 33% / udev 252M 180K 252M 1% /dev /dev/hda3 53G 4.3G 49G 9% /home /dev/sda1 75G 14G 61G 19% /media/SEA_DISC linux-steve:~ # SYSTEM LOG from network setup on...... Setting up network interfaces: lo lo IP address: 127.0.0.1/8 done eth0 device: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78) eth0 configuration: eth-id-00:0e:a6:9d:4e:df eth0 (DHCP) . <notice>pidofproc: dhcpcd 3063 <notice>killproc: kill(2478,20) <notice>killproc: kill(2466,1) <notice>killproc: kill(2478,18) <notice>killproc: kill(2478,12) IP/Netmask: 192.168.1.103 / 255.255.255.0 doneSetting up service network . . . . . . . . . . . . . . . .done Starting mdnsd<notice>startproc: execve (/usr/sbin/mdnsd) [ /usr/sbin/mdnsd -f /etc/nss_mdns.conf -b ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/mdnsd ] done Starting auditd <notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -n ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/auditd ] done Starting RPC portmap daemon<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/portmap ] done Importing Net File System (NFS)unused Checking/updating CPU microcode unused <notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ] Starting nfsboot (sm-notify) done <notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] Starting cupsddone Starting Name Service Cache Daemondone Starting ZENworks Management Daemondone Requested buffer size 2048, fragment size 1024 ALSA pcm 'default' set buffer size 2048, period size 1024 bytes TiMidity starting in ALSA server mode Opening sequencer port: 128:0 128:1 128:2 128:3 Mount SMB/ CIFS File Systems unused <notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] Starting SSH daemondone <notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/usr/bin:/sbin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ] Starting powersaved: done Starting mail service (Postfix)done Starting INET services. (xinetd)<notice>startproc: execve (/usr/sbin/xinetd) [ /usr/sbin/xinetd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/xinetd ] <notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/cron ] Starting CRON daemondone <notice>startproc: execve (/opt/gnome/sbin/gdm) [ /opt/gnome/sbin/gdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg LANG=en_US.UTF-8 PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ XCURSOR_THEME=Industrial WINDOWMANAGER=/usr/X11R6/bin/gnome splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/opt/gnome/sbin/gdm ] done Starting service gdmdone done Master Resource Control: runlevel 5 has been reached Failed services in runlevel 5: boot.apparmor Skipped services in runlevel 5: irq_balancer nfs microcode smbfs <notice>killproc: kill(2388,3) SYSTEM LOG FROM LAST REBOOT Oct 30 21:44:38 linux-steve gdm[3718]: Master rebooting... Oct 30 21:44:41 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:44:43 linux-steve shutdown[3718]: shutting down for system reboot Oct 30 21:44:43 linux-steve init: Switching to runlevel: 6 Oct 30 21:44:45 linux-steve kernel: bootsplash: status on console 0 changed to on Oct 30 21:44:45 linux-steve auditd[3286]: The audit daemon is exiting. Oct 30 21:44:45 linux-steve kernel: audit(1162262685.805:7): audit_pid=0 old=3286 by auid=4294967295 Oct 30 21:44:46 linux-steve sshd[3686]: Received signal 15; terminating. Oct 30 21:44:47 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:44:47 linux-steve xinetd[3720]: Exiting... Oct 30 21:44:48 linux-steve kernel: Kernel logging (proc) stopped. Oct 30 21:44:48 linux-steve kernel: Kernel log daemon terminating. Oct 30 21:44:49 linux-steve syslog-ng[2403]: syslog-ng version 1.6.8 going down Oct 30 21:46:28 linux-steve syslog-ng[2456]: syslog-ng version 1.6.8 starting Oct 30 21:46:29 linux-steve ifstatus: lo Oct 30 21:46:29 linux-steve ifstatus: lo is up Oct 30 21:46:29 linux-steve ifstatus: 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue Oct 30 21:46:29 linux-steve ifstatus: link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 Oct 30 21:46:29 linux-steve ifstatus: inet 127.0.0.1/8 scope host lo Oct 30 21:46:29 linux-steve ifstatus: IP address: 127.0.0.1/8 Oct 30 21:46:29 linux-steve ifstatus-route: Configured routes for interface lo: Oct 30 21:46:29 linux-steve ifstatus-route: 127/8 - - lo Oct 30 21:46:29 linux-steve ifstatus-route: Active routes for interface lo: Oct 30 21:46:29 linux-steve ifstatus-route: 127.0.0.0/8 scope link Oct 30 21:46:29 linux-steve ifstatus-route: 1 of 1 configured routes for interface lo up Oct 30 21:46:29 linux-steve ifup: lo Oct 30 21:46:29 linux-steve ifup: lo Oct 30 21:46:29 linux-steve ifup: IP address: 127.0.0.1/8 Oct 30 21:46:29 linux-steve ifup: Oct 30 21:46:30 linux-steve ifup: eth0 device: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78) Oct 30 21:46:30 linux-steve ifup: eth0 configuration: eth-id-00:0e:a6:9d:4e:df Oct 30 21:46:31 linux-steve ifup-dhcp: eth0 (DHCP) Oct 30 21:46:31 linux-steve ifup-dhcp: . Oct 30 21:46:31 linux-steve modify_resolvconf: Service dhcpcd modified /etc/resolv.conf. See info block in this file Oct 30 21:46:31 linux-steve ifup: eth0 device: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78) Oct 30 21:46:31 linux-steve ifup: eth0 configuration: eth-id-00:0e:a6:9d:4e:df Oct 30 21:46:31 linux-steve kernel: klogd 1.4.1, log source = /proc/kmsg started. Oct 30 21:46:31 linux-steve kernel: klogd 1.4.1, ---------- state change ---------- Oct 30 21:46:31 linux-steve kernel: Kernel logging (proc) stopped. Oct 30 21:46:31 linux-steve syslog-ng[2456]: SIGHUP received, restarting syslog-ng Oct 30 21:46:31 linux-steve kernel: klogd 1.4.1, ---------- state change ---------- Oct 30 21:46:31 linux-steve kernel: klogd 1.4.1, log source = /proc/kmsg started. Oct 30 21:46:31 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:46:32 linux-steve syslog-ng[2456]: new configuration initialized Oct 30 21:46:31 linux-steve kernel: ACPI: Power Button (FF) [PWRF] Oct 30 21:46:32 linux-steve ifup-dhcp: IP/Netmask: 192.168.1.103 Oct 30 21:46:32 linux-steve ifup-dhcp: / 255.255.255.0 Oct 30 21:46:32 linux-steve ifup-dhcp: Oct 30 21:46:32 linux-steve syslog-ng[2456]: Changing permissions on special file /dev/xconsole Oct 30 21:46:32 linux-steve syslog-ng[2456]: Changing permissions on special file /dev/tty10 Oct 30 21:46:32 linux-steve mDNSResponder (Engineering Build) (Apr 23 2006 01:49:36) [3293]: starting Oct 30 21:46:32 linux-steve auditd[3319]: Init complete, auditd 1.1.3 listening for events Oct 30 21:46:33 linux-steve kernel: NET: Registered protocol family 10 Oct 30 21:46:33 linux-steve kernel: lo: Disabled Privacy Extensions Oct 30 21:46:33 linux-steve kernel: IPv6 over IPv4 tunneling driver Oct 30 21:46:33 linux-steve kernel: klogd 1.4.1, ---------- state change ---------- Oct 30 21:46:33 linux-steve ifup: sit0 Oct 30 21:46:33 linux-steve ifup: No configuration found for sit0 Oct 30 21:46:35 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:46:35 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:46:35 linux-steve kernel: powernow-k8: Processor cpuid 6a0 not supported Oct 30 21:46:36 linux-steve /usr/sbin/cron[3650]: (CRON) STARTUP (V5.0) Oct 30 21:46:36 linux-steve rcpowersaved: CPU frequency scaling is not supported by your processor. Oct 30 21:46:36 linux-steve rcpowersaved: enter 'CPUFREQ_ENABLED=no' in /etc/powersave/cpufreq to avoid this warning. Oct 30 21:46:36 linux-steve rcpowersaved: Cannot load cpufreq governors - No cpufreq driver available Oct 30 21:46:37 linux-steve rcpowersaved: s2ram does not know your machine. See 's2ram -i' for details. (127) Oct 30 21:46:37 linux-steve rcpowersaved: Use SUSPEND2RAM_FORCE=yes to override this detection. Oct 30 21:46:37 linux-steve sshd[3721]: Server listening on :: port 22. Oct 30 21:46:37 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:46:37 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:46:37 linux-steve xinetd[3762]: Reading included configuration file: /etc/xinetd.d/chargen [file=/etc/xinetd.conf] [line=26] Oct 30 21:46:37 linux-steve xinetd[3762]: Reading included configuration file: /etc/xinetd.d/chargen-udp [file=/etc/xinetd.d/chargen-udp] [line=14] Oct 30 21:46:37 linux-steve xinetd[3762]: Reading included configuration file: /etc/xinetd.d/cups-lpd [file=/etc/xinetd.d/cups-lpd] [line=15] Oct 30 21:46:37 linux-steve xinetd[3762]: Reading included configuration file: /etc/xinetd.d/cvs [file=/etc/xinetd.d/cvs] [line=11] Oct 30 21:46:38 linux-steve xinetd[3762]: Reading included configuration file: /etc/xinetd.d/daytime [file=/etc/xinetd.d/daytime] [line=16] Oct 30 21:46:38 linux-steve xinetd[3762]: Reading included configuration file: /etc/xinetd.d/daytime-udp [file=/etc/xinetd.d/daytime-udp] [line=14] Oct 30 21:46:38 linux-steve xinetd[3762]: Reading included configuration file: /etc/xinetd.d/echo [file=/etc/xinetd.d/echo] [line=15] Oct 30 21:46:38 linux-steve xinetd[3762]: Reading included configuration file: /etc/xinetd.d/echo-udp [file=/etc/xinetd.d/echo-udp] [line=14] Oct 30 21:46:38 linux-steve xinetd[3762]: Reading included configuration file: /etc/xinetd.d/fam [file=/etc/xinetd.d/fam] [line=15] Oct 30 21:46:38 linux-steve xinetd[3762]: Reading included configuration file: /etc/xinetd.d/i4l-vbox [file=/etc/xinetd.d/i4l-vbox] [line=17] Oct 30 21:46:38 linux-steve xinetd[3762]: Reading included configuration file: /etc/xinetd.d/imap [file=/etc/xinetd.d/imap] [line=10] Oct 30 21:46:38 linux-steve xinetd[3762]: Reading included configuration file: /etc/xinetd.d/netstat [file=/etc/xinetd.d/netstat] [line=69] Oct 30 21:46:38 linux-steve xinetd[3762]: Reading included configuration file: /etc/xinetd.d/qpopper [file=/etc/xinetd.d/qpopper] [line=16] Oct 30 21:46:38 linux-steve xinetd[3762]: Reading included configuration file: /etc/xinetd.d/rsync [file=/etc/xinetd.d/rsync] [line=14] Oct 30 21:46:38 linux-steve xinetd[3762]: Reading included configuration file: /etc/xinetd.d/sane-port [file=/etc/xinetd.d/sane-port] [line=12] Oct 30 21:46:38 linux-steve xinetd[3762]: Reading included configuration file: /etc/xinetd.d/servers [file=/etc/xinetd.d/servers] [line=14] Oct 30 21:46:38 linux-steve xinetd[3762]: Reading included configuration file: /etc/xinetd.d/services [file=/etc/xinetd.d/services] [line=14] Oct 30 21:46:38 linux-steve xinetd[3762]: Reading included configuration file: /etc/xinetd.d/swat [file=/etc/xinetd.d/swat] [line=14] Oct 30 21:46:38 linux-steve xinetd[3762]: Reading included configuration file: /etc/xinetd.d/systat [file=/etc/xinetd.d/systat] [line=12] Oct 30 21:46:38 linux-steve xinetd[3762]: Reading included configuration file: /etc/xinetd.d/tftp [file=/etc/xinetd.d/tftp] [line=17] Oct 30 21:46:38 linux-steve xinetd[3762]: Reading included configuration file: /etc/xinetd.d/time [file=/etc/xinetd.d/time] [line=14] Oct 30 21:46:38 linux-steve xinetd[3762]: Reading included configuration file: /etc/xinetd.d/time-udp [file=/etc/xinetd.d/time-udp] [line=15] Oct 30 21:46:38 linux-steve xinetd[3762]: Reading included configuration file: /etc/xinetd.d/vnc [file=/etc/xinetd.d/vnc] [line=15] Oct 30 21:46:38 linux-steve xinetd[3762]: Reading included configuration file: /etc/xinetd.d/vsftpd [file=/etc/xinetd.d/vsftpd] [line=88] Oct 30 21:46:38 linux-steve xinetd[3762]: removing chargen Oct 30 21:46:38 linux-steve xinetd[3762]: removing chargen Oct 30 21:46:38 linux-steve xinetd[3762]: removing printer Oct 30 21:46:38 linux-steve xinetd[3762]: removing cvspserver Oct 30 21:46:38 linux-steve xinetd[3762]: removing daytime Oct 30 21:46:38 linux-steve xinetd[3762]: removing daytime Oct 30 21:46:38 linux-steve xinetd[3762]: removing echo Oct 30 21:46:38 linux-steve xinetd[3762]: removing echo Oct 30 21:46:38 linux-steve xinetd[3762]: removing fam Oct 30 21:46:38 linux-steve xinetd[3762]: removing vboxd Oct 30 21:46:38 linux-steve xinetd[3762]: removing pop2 Oct 30 21:46:38 linux-steve xinetd[3762]: removing pop3 Oct 30 21:46:38 linux-steve xinetd[3762]: removing pop3s Oct 30 21:46:38 linux-steve xinetd[3762]: removing imap Oct 30 21:46:38 linux-steve xinetd[3762]: removing imaps Oct 30 21:46:38 linux-steve xinetd[3762]: removing netstat Oct 30 21:46:38 linux-steve xinetd[3762]: removing pop3 Oct 30 21:46:38 linux-steve xinetd[3762]: removing rsync Oct 30 21:46:38 linux-steve xinetd[3762]: removing sane-port Oct 30 21:46:38 linux-steve xinetd[3762]: removing servers Oct 30 21:46:38 linux-steve xinetd[3762]: removing services Oct 30 21:46:38 linux-steve xinetd[3762]: removing swat Oct 30 21:46:38 linux-steve xinetd[3762]: removing systat Oct 30 21:46:38 linux-steve xinetd[3762]: removing tftp Oct 30 21:46:38 linux-steve xinetd[3762]: removing time Oct 30 21:46:38 linux-steve xinetd[3762]: removing time Oct 30 21:46:38 linux-steve xinetd[3762]: removing vnc2 Oct 30 21:46:38 linux-steve xinetd[3762]: removing vnc3 Oct 30 21:46:38 linux-steve xinetd[3762]: removing vnchttpd2 Oct 30 21:46:38 linux-steve xinetd[3762]: removing vnchttpd3 Oct 30 21:46:38 linux-steve xinetd[3762]: removing ftp Oct 30 21:46:38 linux-steve xinetd[3762]: xinetd Version 2.3.14 started with libwrap loadavg options compiled in. Oct 30 21:46:38 linux-steve xinetd[3762]: Started working: 2 available services Oct 30 21:46:39 linux-steve kernel: bootsplash: status on console 0 changed to on Oct 30 21:46:39 linux-steve hp: unable to open /var/run/hpiod.port: No such file or directory: prnt/hpijs/hplip_api.c 84 Oct 30 21:46:39 linux-steve zmd: NetworkManagerModule (WARN): Failed to connect to NetworkManager Oct 30 21:46:43 linux-steve kernel: eth0: no IPv6 routers present Oct 30 21:47:30 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:47:30 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:47:47 linux-steve zmd: Daemon (WARN): Not starting remote web server Oct 30 21:47:54 linux-steve gconfd (steve-4016): starting (version 2.12.1), pid 4016 user 'steve' Oct 30 21:47:54 linux-steve gconfd (steve-4016): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Oct 30 21:47:54 linux-steve gconfd (steve-4016): Resolved address "xml:readwrite:/home/steve/.gconf" to a writable configuration source at position 1 Oct 30 21:47:54 linux-steve gconfd (steve-4016): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Oct 30 21:48:24 linux-steve gconfd (steve-4016): GConf server is not in use, shutting down. Oct 30 21:48:24 linux-steve gconfd (steve-4016): Exiting Oct 30 21:49:21 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:50:06 linux-steve gconfd (steve-4531): starting (version 2.12.1), pid 4531 user 'steve' Oct 30 21:50:06 linux-steve gconfd (steve-4531): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Oct 30 21:50:06 linux-steve gconfd (steve-4531): Resolved address "xml:readwrite:/home/steve/.gconf" to a writable configuration source at position 1 Oct 30 21:50:06 linux-steve gconfd (steve-4531): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Oct 30 21:50:36 linux-steve gconfd (steve-4531): GConf server is not in use, shutting down. Oct 30 21:50:36 linux-steve gconfd (steve-4531): Exiting Oct 30 21:50:38 linux-steve gconfd (steve-4726): starting (version 2.12.1), pid 4726 user 'steve' Oct 30 21:50:38 linux-steve gconfd (steve-4726): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Oct 30 21:50:38 linux-steve gconfd (steve-4726): Resolved address "xml:readwrite:/home/steve/.gconf" to a writable configuration source at position 1 Oct 30 21:50:38 linux-steve gconfd (steve-4726): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Oct 30 21:50:56 linux-steve zmd: ServiceManager (ERROR): Service Refresh Failed: Failed to parse XML metadata: Can't add repository at http://ftp-linux.cc.gatech.edu/pub/suse/suse/update/10.1: Cannot create the installation source Oct 30 21:50:59 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:51:05 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:51:08 linux-steve gconfd (steve-4726): GConf server is not in use, shutting down. Oct 30 21:51:08 linux-steve gconfd (steve-4726): Exiting Oct 30 21:51:11 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:51:17 linux-steve gconfd (root-4918): starting (version 2.12.1), pid 4918 user 'root' Oct 30 21:51:17 linux-steve gconfd (root-4918): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Oct 30 21:51:17 linux-steve gconfd (root-4918): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 1 Oct 30 21:51:17 linux-steve gconfd (root-4918): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Oct 30 21:51:17 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:51:23 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:51:23 linux-steve gconfd (root-4918): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 0 Oct 30 21:51:26 linux-steve kernel: ISO 9660 Extensions: Microsoft Joliet Level 3 Oct 30 21:51:26 linux-steve kernel: ISO 9660 Extensions: RRIP_1991A Oct 30 21:51:29 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:51:35 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:51:41 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:51:47 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:51:53 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:51:59 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:52:05 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:52:11 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:52:17 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:52:23 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:52:29 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:52:33 linux-steve gconfd (root-4918): Exiting Oct 30 21:52:33 linux-steve gconfd (root-5095): starting (version 2.12.1), pid 5095 user 'root' Oct 30 21:52:33 linux-steve gconfd (root-5095): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Oct 30 21:52:33 linux-steve gconfd (root-5095): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 1 Oct 30 21:52:33 linux-steve gconfd (root-5095): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Oct 30 21:52:35 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:52:41 linux-steve gconfd (steve-5172): starting (version 2.12.1), pid 5172 user 'steve' Oct 30 21:52:41 linux-steve gconfd (steve-5172): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Oct 30 21:52:41 linux-steve gconfd (steve-5172): Resolved address "xml:readwrite:/home/steve/.gconf" to a writable configuration source at position 1 Oct 30 21:52:41 linux-steve gconfd (steve-5172): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Oct 30 21:52:41 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:52:47 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:52:53 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:52:59 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:53:03 linux-steve gconfd (root-5095): GConf server is not in use, shutting down. Oct 30 21:53:03 linux-steve gconfd (root-5095): Exiting Oct 30 21:53:05 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:53:11 linux-steve gconfd (steve-5172): GConf server is not in use, shutting down. Oct 30 21:53:11 linux-steve gconfd (steve-5172): Exiting Oct 30 21:53:11 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:53:17 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:53:18 linux-steve gdm[3843]: Couldn't authenticate user Oct 30 21:53:23 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:53:27 linux-steve gdm[3843]: Couldn't authenticate user Oct 30 21:53:29 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:53:35 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Oct 30 21:53:35 linux-steve gconfd (steve-5242): starting (version 2.12.1), pid 5242 user 'steve' Oct 30 21:53:35 linux-steve gconfd (steve-5242): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Oct 30 21:53:35 linux-steve gconfd (steve-5242): Resolved address "xml:readwrite:/home/steve/.gconf" to a writable configuration source at position 1 Oct 30 21:53:35 linux-steve gconfd (steve-5242): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Oct 30 21:53:41 linux-steve kernel: ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127] Steve Reilly http://reillyblog.com/ Registered Linux user: 412217 http://counter.li.org/ ____________________________________________________________________________________ Low, Low, Low Rates! Check out Yahoo! Messenger's cheap PC-to-Phone call rates (http://voice.yahoo.com)