[opensuse] Screen Rotate
I have a dell computer with a built in Nvidia Ge Force 6150 LE. In yast Hardware - Graphics Card & Monitor - Monitor - Display 1 - Options , there is a button to rotate the screen but it is greyed out. I think I installed the Nvidia 3d driver at some time but not sure how / where to find what I did install. Tia , Mike -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
ka1ifq wrote:
I have a dell computer with a built in Nvidia Ge Force 6150 LE. In yast Hardware - Graphics Card & Monitor - Monitor - Display 1 - Options , there is a button to rotate the screen but it is greyed out. I think I installed the Nvidia 3d driver at some time but not sure how / where to find what I did install.
Tia , Mike
Do you see the cool NVIDIA logo when your PC boots up? If not, the Nvidia drivers are not ionstalled, if yes, you most probably do not have the nvidia drivers installed. Then proceed from there. regards Eberhard -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Sunday 26 August 2007 07:16, Eberhard Roloff wrote:
ka1ifq wrote:
I have a dell computer with a built in Nvidia Ge Force 6150 LE. In yast Hardware - Graphics Card & Monitor - Monitor - Display 1 - Options , there is a button to rotate the screen but it is greyed out. I think I installed the Nvidia 3d driver at some time but not sure how / where to find what I did install.
Tia , Mike
Do you see the cool NVIDIA logo when your PC boots up? If not, the Nvidia drivers are not ionstalled, if yes, you most probably do not have the nvidia drivers installed.
Then proceed from there. regards Eberhard
Yes, I do get the Nvidia splash screen. Mike -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
ka1ifq wrote: [...]
Do you see the cool NVIDIA logo when your PC boots up? If not, the Nvidia drivers are not ionstalled, if yes, you most probably do not have the nvidia drivers installed.
Then proceed from there. regards Eberhard
Yes, I do get the Nvidia splash screen.
Mike
ok, then you could try "nvidia-settings" from a working X-session. I do not remmber whether this graphical tool has a setting for scrren rotation. However I am sure, that the generic texttool "nvidia-xconfig" has one. see man "nvidia-xconfig" hth Eberhard -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Sun, 2007-08-26 at 09:09 -0400, ka1ifq wrote:
On Sunday 26 August 2007 07:16, Eberhard Roloff wrote:
ka1ifq wrote:
I have a dell computer with a built in Nvidia Ge Force 6150 LE. In yast Hardware - Graphics Card & Monitor - Monitor - Display 1 - Options , there is a button to rotate the screen but it is greyed out. I think I installed the Nvidia 3d driver at some time but not sure how / where to find what I did install.
Tia , Mike
Do you see the cool NVIDIA logo when your PC boots up? If not, the Nvidia drivers are not ionstalled, if yes, you most probably do not have the nvidia drivers installed.
Then proceed from there. regards Eberhard
Yes, I do get the Nvidia splash screen.
You need to enable rotation in your xorg.conf file. AFAIK, this is not done automatically: Section "Device" Identifier "Device[0]" Driver "nvidia" VendorName "NVidia" BoardName "GeForce 6200 (0x0221)" Option "RandRRotation" EndSection Cheers, Dave -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Sunday 26 August 2007 13:45, Eberhard Roloff wrote:
ka1ifq wrote: [...]
Do you see the cool NVIDIA logo when your PC boots up? If not, the Nvidia drivers are not ionstalled, if yes, you most probably do not have the nvidia drivers installed.
Then proceed from there. regards Eberhard
Yes, I do get the Nvidia splash screen.
Mike
ok, then you could try "nvidia-settings" from a working X-session. I do not remmber whether this graphical tool has a setting for scrren rotation.
However I am sure, that the generic texttool "nvidia-xconfig" has one.
see man "nvidia-xconfig"
hth Eberhard
No Dice, but thanks, I learned a couple new things. Thanks, Mike -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Sunday 26 August 2007 17:28, Dave Howorth wrote:
On Sun, 2007-08-26 at 09:09 -0400, ka1ifq wrote:
On Sunday 26 August 2007 07:16, Eberhard Roloff wrote:
ka1ifq wrote:
I have a dell computer with a built in Nvidia Ge Force 6150 LE. In yast Hardware - Graphics Card & Monitor - Monitor - Display 1 - Options , there is a button to rotate the screen but it is greyed out. I think I installed the Nvidia 3d driver at some time but not sure how / where to find what I did install.
Tia , Mike
Do you see the cool NVIDIA logo when your PC boots up? If not, the Nvidia drivers are not ionstalled, if yes, you most probably do not have the nvidia drivers installed.
Then proceed from there. regards Eberhard
Yes, I do get the Nvidia splash screen.
You need to enable rotation in your xorg.conf file. AFAIK, this is not done automatically:
Section "Device" Identifier "Device[0]" Driver "nvidia" VendorName "NVidia" BoardName "GeForce 6200 (0x0221)" Option "RandRRotation" EndSection
Cheers, Dave
Dave, You were correct, it is not in there, a quick edit and an Xserver restart and it works like a charm. After all that I find that I have to redo the bracket as the display only allows one orientation, quickly fixed with a screwdriver.. Thanks, Mike -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
With respect to wlan and internet access I have had some success with OS10.2 and so have after a succession of DVD updating a remnant ifcfg-wlan0, now evidently not entirely compatible to OS10.3beta2. There has however been no success in booting up the wlan ( in Linux ) during the good halfyear of switching my dualboot Fujitsu-Siemens desktop between WinXp and any alpha or beta version of OpenSuse 10.*. Rather while in XP I use the YAReg tool for looking into the Reiser file system to examine the crucial man and /etc/.. files from within cygwin, in relative repose, thus able to send this email. Tia to those reading what has become much too long / Tom My observations are marked : Comment After booting the state of 10.3 beta2 is examined: Axehult-Fujitsu:/home/taxehult # ifconfig eth0 Link encap:Ethernet HWaddr 00:30:05:6C:7A:A7 UP BROADCAST NOTRAILERS MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:14 errors:0 dropped:0 overruns:0 frame:0 TX packets:14 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:820 (820.0 b) TX bytes:820 (820.0 b) Comment: No wlan is discovered. In my brick house the desktop is > 10m for radio waves, 25m cable distance from the Dell Wireless 2350 Broadband Router. I have no cable connection. Axehult-Fujitsu:/home/taxehult # ndiswrapper -l wlanuig : driver installed device (0BF8:1007) present Comment: Card: Fujitsu-Siemens Connect2Air E-5400 USB Chipset: Intersil-Frisbee + Netchip usbid: 0bf8:1007 Fujitsu Siemens Computers Axehult-Fujitsu:/home/taxehult # ifconfig wlan0 wlan0 Link encap:Ethernet HWaddr 00:30:05:61:02:61 BROADCAST MULTICAST MTU:1500 Metric:1 Comment: why was that accepted ? Axehult-Fujitsu:/home/taxehult # iwconfig wlan0 wlan0 IEEE 802.11g ESSID:off/any Nickname:"Axehult-Fujitsu" Mode:Managed Frequency:2.462 GHz Access Point: Not-Associated Bit Rate:2 Mb/s Tx-Power:32 dBm RTS thr:2347 B Fragment thr:2346 B Encryption key:0850-1564-5915-****-****-****-** [3] Security mode:restricted Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Comment: Security mode:restricted. why ? Axehult-Fujitsu:/home/taxehult # iwconfig wlan0 essid wireless key open Axehult-Fujitsu:/home/taxehult # iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11g ESSID:"wireless" Nickname:"Axehult-Fujitsu" Mode:Managed Frequency:2.472 GHz Access Point: 00:90:4B:E2:74:E8 Bit Rate=6 Mb/s Tx-Power:32 dBm RTS thr:2347 B Fragment thr:2346 B Encryption key:0850-1564-5915-****-****-****-** [3] Security mode:open Power Management:off Link Quality:25/100 Signal level:-80 dBm Noise level:-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Comment: Finally, ssid, AP and Security mode:open And now something odd: Axehult-Fujitsu:/home/taxehult # ifdown wlan0 wlan0 Axehult-Fujitsu:/home/taxehult # ifup wlan0 wlan0 Starting DHCP Client Daemon on wlan0... . IP/Netmask: 192.168.2.2 / 255.255.255.0 ('Axehult-Fujitsu') Error while executing: Command 'ip route replace to 213.163.128.185/24 via 192.168.2.1 dev wlan0' returned: RTNETLINK answers: Invalid argument Configuration line: 213.163.128.185 192.168.2.1 255.255.255.0 wlan0 Error while executing: Command 'ip route replace to 213.142.0.242/24 via 192.168.2.1 dev wlan0' returned: RTNETLINK answers: Invalid argument Configuration line: 213.142.0.242 192.168.2.1 255.255.255.0 wlan0 Axehult-Fujitsu:/home/taxehult # iwconfig wlan0 wlan0 IEEE 802.11g ESSID:"wireless" Nickname:"Axehult-Fujitsu" Mode:Managed Frequency:2.472 GHz Access Point: 00:90:4B:E2:74:E8 Bit Rate=6 Mb/s Tx-Power:32 dBm RTS thr:2347 B Fragment thr:2346 B Encryption key:0850-1564-5915-****-****-****-** [3] Security mode:restricted Power Management:off Link Quality:29/100 Signal level:-77 dBm Noise level:-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Comment: Security mode:restricted. why ? Axehult-Fujitsu:/home/taxehult # ping gateway PING default-gateway (192.168.2.1) 56(84) bytes of data. 64 bytes from default-gateway (192.168.2.1): icmp_seq=1 ttl=64 time=1.79 ms 64 bytes from default-gateway (192.168.2.1): icmp_seq=2 ttl=64 time=1.73 ms At this stage using an internet browser I can login to my router 192.168.2.1 but not reach internet, a DNS problem I gather. I admit that I have been unable on uncountable attempts to use YAST's 'network card' initializer. How tackle the DNS problem ?
participants (4)
-
Dave Howorth -
Eberhard Roloff -
ka1ifq -
Tom Axehult