Re: [SLE] IP address is lost with cross-cable
On Monday 28 August 2006 12:05, you wrote:
With SLED I'd say the main difference is it's Gnome not KDE. Which are your users used to? If they are switching to Linux, which do you think will work best for them? Pick one and stick to it, either choice is better than wavering between them.
Well, they are used to Gnome. So, I guess they won't have any difficulties using SLED. -- Fajar Priyanto | Reg'd Linux User #327841 | Linux tutorial http://linux2.arinet.org 1:35pm up 5:35, 2.6.16.13-4-default GNU/Linux Let's use OpenOffice. http://www.openoffice.org
Hello, I don't know really where to look but I've got a labtop with a wireless adapter build-in but it doens't seem to result in a wireless network. I can configure it with Yast but looking with ifconfig it doesn't appear. Can anyone give some suggestions where to look? It's Suse 10.1 Prof. Thanks in advance. Rolf.
Hi Rolf, in fact, ifconfig won't show you what you are looking for in terms of WiFi devices... try iwconfig instead. Once the wireless device has been configured it will appear when you issue a normal ifconfig from the command line. As a suggestion: try wlassistant :-) HTH, Martin --- Rolf van der Zwart <blackpit@xs4all.nl> wrote:
Hello,
I don't know really where to look but I've got a labtop with a wireless adapter build-in but it doens't seem to result in a wireless network. I can configure it with Yast but looking with ifconfig it doesn't appear.
Can anyone give some suggestions where to look? It's Suse 10.1 Prof.
Thanks in advance.
Rolf.
-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
Hello, When I use iwconfig i get the following result: lo no wireless extensions. eth0 no wireless extensions. sit0 no wireless extensions. I presume that this is not correct yet. The wireless adapter is: ipw-firmware - Firmware for Intel PRO/Wireless WLAN Cards I can seem to find wlassistant, is this downloadable somerwere? Rolf.
Hi Rolf,
in fact, ifconfig won't show you what you are looking for in terms of WiFi devices... try iwconfig instead.
Once the wireless device has been configured it will appear when you issue a normal ifconfig from the command line.
As a suggestion: try wlassistant :-)
HTH, Martin
--- Rolf van der Zwart <blackpit@xs4all.nl> wrote:
Hello,
I don't know really where to look but I've got a labtop with a wireless adapter build-in but it doens't seem to result in a wireless network. I can configure it with Yast but looking with ifconfig it doesn't appear.
Can anyone give some suggestions where to look? It's Suse 10.1 Prof.
Thanks in advance.
Rolf.
-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
On Sunday 27 August 2006 22:50, Rolf van der Zwart wrote:
Hello,
I don't know really where to look but I've got a labtop with a wireless adapter build-in but it doens't seem to result in a wireless network. I can configure it with Yast but looking with ifconfig it doesn't appear.
Can anyone give some suggestions where to look? It's Suse 10.1 Prof.
More details are needed. What chipset is the wireless? run /sbin/lspci to find out. -- _____________________________________ John Andersen
Hello, This is what: /sbin/lspci gives: 00:09.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) 00:0b.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03) Rolf.
On Sunday 27 August 2006 22:50, Rolf van der Zwart wrote:
Hello,
I don't know really where to look but I've got a labtop with a wireless adapter build-in but it doens't seem to result in a wireless network. I can configure it with Yast but looking with ifconfig it doesn't appear.
Can anyone give some suggestions where to look? It's Suse 10.1 Prof.
More details are needed. What chipset is the wireless? run /sbin/lspci to find out.
-- _____________________________________ John Andersen
"Rolf van der Zwart" <blackpit@xs4all.nl> writes:
Hello,
This is what:
/sbin/lspci gives:
00:09.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
That one is not supported at all in 10.1 due to no driver at that time, it should work with openSUSE 10.2 or the current factory rpms, Andreas -- Andreas Jaeger, aj@suse.de, http://www.suse.de/~aj/ SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GPG fingerprint = 93A3 365E CE47 B889 DF7F FED1 389A 563C C272 A126
On Monday 28 August 2006 03:10, Andreas Jaeger wrote:
"Rolf van der Zwart" <blackpit@xs4all.nl> writes:
Hello,
This is what:
/sbin/lspci gives:
00:09.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
That one is not supported at all in 10.1 due to no driver at that time, it should work with openSUSE 10.2 or the current factory rpms,
Andreas
Well there is always the possibility of trying ndiswrapper and running the windows drivers. -- _____________________________________ John Andersen
On Monday 28 August 2006 6:20 am, Rolf van der Zwart wrote:
Hello,
This is what:
/sbin/lspci gives:
00:09.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) 00:0b.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03) On SuSE 10.1 you will need to use ndiswrapper. I have the same problem. First, you need to get the Windows version of the Broadcom driver (32-bit or 64-bit). I detailed the steps on this list back in April. In my case, it was on an HP NX6125 64-bit system, but the steps are the same: http://lists.suse.com/archive/suse-linux-e/2006-Apr/2195.html
-- Jerry Feldman <gaf@blu.org> Boston Linux and Unix user group http://www.blu.org PGP key id:C5061EA9 PGP Key fingerprint:053C 73EC 3AC1 5C44 3E14 9245 FB00 3ED5 C506 1EA9
On Mon, 28 Aug 2006 08:50:09 +0200 (CEST) "Rolf van der Zwart" <blackpit@xs4all.nl> wrote:
Hello,
I don't know really where to look but I've got a labtop with a wireless adapter build-in but it doens't seem to result in a wireless network. I can configure it with Yast but looking with ifconfig it doesn't appear.
Can anyone give some suggestions where to look? It's Suse 10.1 Prof.
Thanks in advance.
Rolf.
Rolf, After reading the responses to your post, I have an additional thought. If you can download the windows driver for your wireless chipset, you can then use ndiswrapper (which is on your SuSE cds) to run the driver on Linux. I had the same problem with my Linksys pcmcia wifi card. I downloaded the driver from Linksys, then in a terminal as root, I ran ndiswrapper -i driverfilename. After rebooting, I called up a terminal, and as root typed modprobe ndiswrapper....up came wifi. I could then configure it for my system... Best, Pete -- Peter N. Spotts | Science reporter The Christian Science Monitor One Norway Street, Boston, MA 02115 USA Office: 617-450-2449 | Office-in-home: 508-520-3139 Email: pspotts@alum.mit.edu | Amateur radio call: KC1jb www.csmonitor.com | www.peterspotts.net
participants (8)
-
Andreas Jaeger -
Fajar Priyanto -
Jerry Feldman -
John Andersen -
Martin Mielke -
Peter N. Spotts -
Puneit Singh -
Rolf van der Zwart