From: Alex Daniloff <alex@daniloff.com> Date: Sat, 23 Dec 2000 19:06:44 -0800 Message-Id: <00122319143700.06363@gate> Subject: Annoing problem with xcdroast Hello Linux folkz, I got a recent problem with my Memorex CRW-1622 IDE CDRW . When it fixating a CD after writing it gives this message: Some error occured!!! Please check process output In the xcdroast panel I see these messages: Cdrecord release 1.6.1 Copyright (C) 1995-1998 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '1,01,00' scsibus: 1 target: 1 lun: 0 atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'Memorex ' Identifikation : 'CRW-1622 ' Revision : 'D3.9' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Track 01: data 140 MB Total size: 161 MB (15:57.49) = 71812 sectors Lout start: 161 MB (15:59/37) = 71812 sectors Current Secsize: -1 ATIP start of lead in: -11637 (97:26/63) ATIP start of lead out: 337350 (75:00/00) Disk type: Cyanine, AZO or similar Manufacturer: CMC Magnetics Corporation Blocks total: 337350 Blocks current: 337350 Blocks remaining: 265538 Starting to write CD/DVD at speed 2 in write mode for single session. Waiting for reader process to fill input-buffer ... input-buffer ready. Starting new track at sector: 0 Track 01: Total bytes read/written: 147066880/147066880 (71810 sectors). Writing time: 488.389s /usr/X11R6/lib/xcdroast-0.96ex/bin/cdrecord-1.6.1: Input/output error. close track/session: scsi sendcmd: retryable error status: 0x2 (CHECK CONDITION) CDB: 5B 00 02 00 00 00 00 00 00 00 Sense Bytes: F0 00 03 00 00 00 00 0A 00 01 9B 6E 02 F8 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x02 Qual 0xF8 (no seek complete) [No matching qualifier] Fru 0x0 Sense flags: Blk 0 (valid) cmd finished after 41.058s timeout 480s /usr/X11R6/lib/xcdroast-0.96ex/bin/cdrecord-1.6.1: fifo had 4489 puts and 4489 gets. /usr/X11R6/lib/xcdroast-0.96ex/bin/cdrecord-1.6.1: fifo was 0 times empty and 4346 times full, min fill was 97%. Fixating time: 41.065s In the log file I see these messages: Dec 23 18:50:15 XCDR 0.96ex: started Dec 23 18:50:20 XCDR 0.96ex: entering Copy Data-CD Dec 23 18:50:51 XCDR 0.96ex: entering Copy Audio-CD Dec 23 18:51:12 XCDR 0.96ex: entering Copy Audio-CD Dec 23 18:51:26 XCDR 0.96ex: entering Master-CD Dec 23 18:52:04 XCDR 0.96ex: entering Copy Data-CD Dec 23 18:52:32 XCDR 0.96ex: entering Setup Dec 23 18:52:38 XCDR 0.96ex: entering Copy Data-CD Dec 23 18:52:58 XCDR 0.96ex: Write-Image from /data/cdimage/acad2k.raw, 147066880 bytes, dummy=0 Dec 23 18:52:58 XCDR 0.96ex: Executing: /usr/X11R6/lib/xcdroast-0.96ex/bin/cdrecord-1.6.1 -v speed=2 dev=1,01,00 -eject driver=mmc_cdr -data /data/cdimage/acad2k.raw Dec 23 19:02:04 XCDR 0.96ex: Write-Image: Some error occured Could somebody help me please figure out what went wrong and how to fix it. I've already screwed 5 CDs Thank you in advance Alex