I have a Lenovo S21 running Leap 42.1. The touch-pad - under kernel 4.1.34 - does not work. But it has never worked. The wireless - a BCM43142 - does work however. When subscribed to Kernel:stable the lenovo installed a 4.8.4 kernel - where the touch pad works but the BCM43142 wireless does not. Does anyone know the trick required to get the BCM43142 to work under a later kernel? I assume this is a firmware load issue. [or if it is possible to make the touchpad on such a device work with a 4.1.x kernel]. LSPCI - 00:00.0 Host bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register (rev 0e) 00:02.0 VGA compatible controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display (rev 0e) 00:14.0 USB controller: Intel Corporation Atom Processor Z36xxx/Z37xxx, Celeron N2000 Series USB xHCI (rev 0e) 00:17.0 SD Host controller: Intel Corporation Atom Processor E3800 Series eMMC 4.5 Controller (rev 0e) 00:1a.0 Encryption controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine (rev 0e) 00:1b.0 Audio device: Intel Corporation Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller (rev 0e) 00:1c.0 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 1 (rev 0e) 00:1c.1 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 2 (rev 0e) 00:1f.0 ISA bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit (rev 0e) 00:1f.3 SMBus: Intel Corporation Atom Processor E3800 Series SMBus Controller (rev 0e) 01:00.0 Network controller: Broadcom Corporation BCM43142 802.11b/g/n (rev 01) 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01) -- Adam Tauno Williams <mailto:awilliam@whitemice.org> GPG D95ED383 openSUSE, a LINUX desktop for humans who need to get work done. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org