SuSE 6.4 crashes during install (every time)
Hello everyone I advised a colleague to install SuSE (6.4) on his system (he's currently running windows). He tried it, but during install, it crashes every time (while copying packages to the harddrive). It beeps, the screen goes blank and the system reboots, leaving Linux semi-installed. Which, off course is very embarrasing for me... because he installed Win95 and Win2000 earlier without problems. He configured his 45 GB HD like this ------------------------------- Windows 95 - 1 GB ------------------------------- Windows 2000 - 1.5 GB ------------------------------- / Ext2 - 2 GB ------------------------------- NTFS - ? ------------------------------- SWAP 100 MB ------------------------------- /tmp 300 MB ------------------------------- /home 1 GB ------------------------------- /data 1 GB ------------------------------- FAT ------------------------------- Unused about 30 GB ------------------------------- Has anybody got any ideas? I was considering whether the controller could be the problem... THANKS Guy Specs: -------------------------- Intel Celeron 450 Mobo: ABIT BH6 192 MB RAM Matrox G200 Mystique Iomega buz SoundBlaster 16 CDWRITER: ACER 4x4x32 (master on secondary controller on mobo) PROMISE Ultra 66 IDE controller card IBM GXP75 - 45 GB
IMO you got way too small space for SuSE and the ext2 & swap partitions are totally illogical to me. For a standard SuSE installation I would do: /boot 10MB (within the 1024 limit if you are going to use SuSE 6.4 Lilo to boot) /swap 192MB (if your RAM is 192MB as you say; why do a 100MB swap?) / at least 3.5GB, with the size of harddisk you got I would make it still bigger. On a single box I would never divide the partitions into /home or /temp like you do, the /data1 is OK if you are going to use it for CD-burning for ex. I can understand the installer to crash on these premises, I would do that too. Cheers, ei On Monday 29 January 2001 11:25, Guy Van Sanden wrote:
Hello everyone
I advised a colleague to install SuSE (6.4) on his system (he's currently running windows). He tried it, but during install, it crashes every time (while copying packages to the harddrive). It beeps, the screen goes blank and the system reboots, leaving Linux semi-installed.
Which, off course is very embarrasing for me... because he installed Win95 and Win2000 earlier without problems.
He configured his 45 GB HD like this
------------------------------- Windows 95 - 1 GB ------------------------------- Windows 2000 - 1.5 GB ------------------------------- / Ext2 - 2 GB ------------------------------- NTFS - ? ------------------------------- SWAP 100 MB ------------------------------- /tmp 300 MB ------------------------------- /home 1 GB ------------------------------- /data 1 GB ------------------------------- FAT ------------------------------- Unused about 30 GB -------------------------------
Has anybody got any ideas? I was considering whether the controller could be the problem...
THANKS
Guy
Specs: -------------------------- Intel Celeron 450 Mobo: ABIT BH6 192 MB RAM Matrox G200 Mystique Iomega buz SoundBlaster 16 CDWRITER: ACER 4x4x32 (master on secondary controller on mobo)
PROMISE Ultra 66 IDE controller card IBM GXP75 - 45 GB
-- @~~ EagleIce ~ gnu4u@linux.nu ~~@ @~~ Running GNU/Linux & KDE ~~@
Even so, The installation program crashed, flat out, without warnings... the location of /boot and sizes of partitions should not cause such a thing... Even when retrying, the same thing happened. It was my colleague's first time installing SuSE at home... not a good one for him...
>>>>>>>>>>>> Original Message <<<<<<<<<<<<<<<<<<
IMO you got way too small space for SuSE and the ext2 & swap
On 29/01/2001, 13:27:00, EagleIce <eagleice@post.netlink.se> wrote regarding Re: [SLE] SuSE 6.4 crashes during install (every time): partitions are
totally illogical to me. For a standard SuSE installation I would do:
/boot 10MB (within the 1024 limit if you are going to use SuSE 6.4 Lilo to boot)
/swap 192MB (if your RAM is 192MB as you say; why do a 100MB swap?)
/ at least 3.5GB, with the size of harddisk you got I would make it still bigger.
On a single box I would never divide the partitions into /home or /temp like you do, the /data1 is OK if you are going to use it for CD-burning for ex.
I can understand the installer to crash on these premises, I would do that too.
Cheers, ei
On Monday 29 January 2001 11:25, Guy Van Sanden wrote:
Hello everyone
I advised a colleague to install SuSE (6.4) on his system (he's currently running windows). He tried it, but during install, it crashes every time (while copying packages to the harddrive). It beeps, the screen goes blank and the system reboots, leaving Linux semi-installed.
Which, off course is very embarrasing for me... because he installed Win95 and Win2000 earlier without problems.
He configured his 45 GB HD like this
------------------------------- Windows 95 - 1 GB ------------------------------- Windows 2000 - 1.5 GB ------------------------------- / Ext2 - 2 GB ------------------------------- NTFS - ? ------------------------------- SWAP 100 MB ------------------------------- /tmp 300 MB ------------------------------- /home 1 GB ------------------------------- /data 1 GB ------------------------------- FAT ------------------------------- Unused about 30 GB -------------------------------
Has anybody got any ideas? I was considering whether the controller could be the problem...
THANKS
Guy
Specs: -------------------------- Intel Celeron 450 Mobo: ABIT BH6 192 MB RAM Matrox G200 Mystique Iomega buz SoundBlaster 16 CDWRITER: ACER 4x4x32 (master on secondary controller on mobo)
PROMISE Ultra 66 IDE controller card IBM GXP75 - 45 GB
-- @~~ EagleIce ~ gnu4u@linux.nu ~~@ @~~ Running GNU/Linux & KDE ~~@
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq
participants (2)
-
EagleIce -
Guy Van Sanden