On 2020-09-03 22:00:54 Carlos E. R. wrote:

Hi,

Look at this output on a newly installed Leap 15.2 system:

arlos@Rescate:~> grep chrony /var/log/messages 2020-09-04T01:55:00.304034+02:00 install chronyd[1465]: chronyd version 3.2 starting (+CMDMON +NTP +REFCLOCK +RTC +PRIVDROP -SCFILTER +SECHASH -SIGND +ASYNCDNS +IPV6 -DEBUG) 2020-09-04T01:55:12.502311+02:00 install chronyd[1465]: Selected source 185.132.136.116 2020-09-04T01:56:16.829596+02:00 install chronyd[1465]: Selected source 178.255.228.77 2020-09-04T01:59:30.696451+02:00 install chronyd[1465]: Selected source 185.132.136.116 2020-09-04T02:25:17.504984+02:00 install chronyd[1465]: Source 2606:4700:f1::123 replaced with 2001:720:424:1::1:15 2020-09-04T02:55:08.658645+02:00 install chronyd[1465]: Source 2606:4700:f1::1 replaced with 2001:720:1014:a202::2 2020-09-04T03:25:01.548423+02:00 install chronyd[1465]: Source 2001:720:424:1::1:15 replaced with 178.32.88.247 2020-09-04T03:54:53.688796+02:00 install chronyd[1465]: Source 2001:720:1014:a201::2 replaced with 2606:4700:f1::1 2020-09-04T04:24:45.734513+02:00 install chronyd[1465]: Source 2001:720:1014:a202::2 replaced with 2001:720:424:1::1:15 carlos@Rescate:~>

Notice how chronyd is trying to use IPv6 addresses, when my home doesn't have IPv6. The network is autoconfigured with DHCP (network manager) from the ISP provided and configured router.

carlos@Rescate:~> ifconfig eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.1.134 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 fe80::b24b:5404:16c2:b3f6 prefixlen 64 scopeid 0x20<link> ether f8:75:a4:e2:4b:48 txqueuelen 1000 (Ethernet) RX packets 91343 bytes 111136210 (105.9 MiB) RX errors 0 dropped 1 overruns 0 frame 0 TX packets 32678 bytes 2686720 (2.5 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

What should I look at? The system is with default configurations, installed hours ago.

-- Cheers

Carlos E. R. (from 15.1 x86_64 at Telcontar)

Looking at info, I see -4 and -6 options, but no description of which is the default; perhaps someone has changed it to -6? There is no relevant entry in the /etc/chrony.conf on my (15.1) machine; if there's none in yours, it must be using the internal default? Whups; that would be info for chronyd. Leslie -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org