![](https://seccdn.libravatar.org/avatar/13a33333478c561849d23bd13b6bb601.jpg?s=120&d=mm&r=g)
Hi, During installation Yast2 detected it automatically. When booted lsmod shows loaded: usbmgr acm (modem) usb-uhci (non Intel spec usb) and one more i believe. Check 'dmesg |less' to see if it is not in activated yet! Also make sure your Bios gives the USB an IRQ. Regards, Armand #-----Oorspronkelijk bericht----- #Van: rev rob [mailto:hd522@earthlink.net] #Verzonden: donderdag 21 februari 2002 8:59 #Aan: suse-linux-e@suse.com #Onderwerp: [SLE] USB support # # #How do i turn on the USB ports on my machine.The suse site said # Use YAST Deze e-mail en de inhoud daarvan is vertrouwelijk. Indien dit bericht niet voor u bestemd is, verzoeken wij u deze e-mail direct aan ons te retourneren en daarna te vernietigen. In dit geval is het ook niet toegestaan deze e-mail en de inhoud daarvan te gebruiken, kopiëren of openbaar te maken aan derden. Holland Railconsult B.V. sluit elke aansprakelijkheid uit in verband met het niet juist, onvolledig of niet tijdig overkomen van de informatie in deze e-mail. This e-mail and its contents are confidential and may be legally privileged. If this e-mail is not intended for you, please contact us immediately by reply e-mail and destroy the e-mail. In this case, please do neither use, nor copy or disclose the e-mail and its contents to anyone. Holland Railconsult B.V. is neither liable for the proper and complete transmission of the information in this e-mail nor for any delay in its receipt.
![](https://seccdn.libravatar.org/avatar/eaf8427347258bacd92070ab4f82217f.jpg?s=120&d=mm&r=g)
OK my BIOS only gives me option to enable or disable USB function Doing boot up i get this message like USB service trying to start,then it won't .asks if it enabled in the BIOS if noy enable it. One more not I neglected to mention the BIOS has 2 USB options one to enable USB other to enable USB for DOS I can't find any type of IRQ setting for the USB function in the BIOS,though. How do I check 'dmesg|less to see if it is not in activated yet? As I've said before during boot up ,it tells me to check the BIOS to see if it is enabled.Please help.I'm confused
participants (2)
-
Chin Kwie Joe AJST (Armand)
-
rev rob