Hi Steve, -----Original Message----- From: Steve Sheriff [SMTP:fsanta@arrakis.es] Sent: Friday, April 07, 2000 1:37 PM
Hi everyone.
After 4 weeks of trying I have finally got a Astra Umax 2200SU on my desk. Works fine under windoze. Nothing under SuSE 6.3 though.
Could someone help me through what is needed next? I see generic scsi loaded as a module in menuconfig but no support for aix7xxx. Is this the one I need? In which case could someone tell me how to install this as a module? I do not have the manual available (lent to friend to install over weekend!)
Which scsi controller do you have? The aic7xxx module works for most adaptec 29xx cards and a few of others, except the 2920. Did you already roll your own kernel or are you using a SuSE kernel? I ask because if you only need modular support the chances are that the proper module is already there.
Or am I missing something simple here?
Did you edit modules.conf so the scsi line reads alias scsi_hostadapter aic7xxx (assuming that's the right module of course) Tim
Yast will not go any further on scanner install since it can't find any scsi devices. The boot up sequence gives:
scsi : 0 hosts scsi : detected total
And, no surprize, SANE can't see it either.
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
Which scsi controller do you have? The aic7xxx module works for most adaptec 29xx cards and a few of others, except the 2920.
Did you already roll your own kernel or are you using a SuSE kernel? I ask because if you only need modular support the chances are that the proper module is already there.
Or am I missing something simple here?
Did you edit modules.conf so the scsi line reads alias scsi_hostadapter aic7xxx (assuming that's the right module of course)
Tim
Hi Tim, Hi everyone, OK. I don't understand modules. So I have reluctantly put the aic7xxx in the kernel. (newbie misconception: it is very hard compiling the kernel, in fact takes less than five minutes, 'make bzlilo' and all!) So now have an up and running scanner. Positive stuff: 1. The Adaptec 2904 works with Linux 2. Umax 2200US works with the 2904 with Linux. 3. I can see a preview of an image under this combination. 4. It is very fast compared to my parallel scanner. Can't figure out: 1. Where does our output go? locate out.pnm gives me nothing. 2. I can't scan under a user other than root (permissions?) 3. Doesn't appear under gimp (ln -s command somewhere?) with xscanimage I get: [umax] WARNING : UMAX scanner Astra 2200 version 2.1 on device /dev/sga is currently an unrecognised device but enquiry seems to be O.K. CONTINUE WITH CAUTION Have the latest rpm of SANE under SuSE 6.3 Thanks for the help over the last month getting to this stage. I feel that it is the software that we do not understand. Any help to be able to get a jpg for our website would be enormously appreciated as it would free hda from windoze! Best wishes from our computer session studio weekend at FeF, Spain. -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
Steve Sheriff wrote:
Can't figure out:
1. Where does our output go? locate out.pnm gives me nothing. When you run the xsane choose the preferences and then apply the changes as you wish
2. I can't scan under a user other than root (permissions?) it is most probably permissions
3. Doesn't appear under gimp (ln -s command somewhere?)
with gimg 1.04it should work under xtrns for more info look to the support database scanner under linux
with xscanimage I get:
[umax] WARNING : UMAX scanner Astra 2200 version 2.1 on device /dev/sga is currently an unrecognised device but enquiry seems to be O.K. CONTINUE WITH CAUTION
Have the latest rpm of SANE under SuSE 6.3
I have complied a new one ( now it turned old xsane 057). on the webpage www.mostang.com/sane you should be able to find more info
Thanks for the help over the last month getting to this stage. I feel that it is the software that we do not understand.
Any help to be able to get a jpg for our website would be enormously appreciated as it would free hda from windoze!
You should be able to save the file any format no problem -- Togan Muftuoglu toganm@yahoo.com __________________________________________________ Do You Yahoo!? Talk to your friends online with Yahoo! Messenger. http://im.yahoo.com -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
participants (3)
-
fsanta@arrakis.es
-
tduggan@dekaresearch.com
-
toganm@yahoo.com