Hai there, it's me again... i got another problem... it's seems that i can't use my soundcard under linux suse 6.0. I have try to edit isapnp.conf... but has no luck at all. FYI, I am using ess isa pnp sound card. I attach my isapnp.conf with this mail hoping that one of u can figure out what's wrong with it. Thank you....</PRE> <PRE> # $Id: pnpdump.c,v 1.17 1998/11/10 22:45:04 fox Exp $ # This is free software, see the sources for details. # This software has NO WARRANTY, use at your OWN RISK # # For details of this file format, see isapnp.conf(5) # # For latest information on isapnp and pnpdump see: # <A HREF="http://www.roestock.demon.co.uk/isapnptools/"><A HREF="http://www.roestock.demon.co.uk/isapnptools/</A">http://www.roestock.demon.co.uk/isapnptools/</A</A>> # # Compiler flags: -DREALTIME -DNEEDSETSCHEDULER -DABORT_ONRESERR # # Trying port address 0203 # Board 1 has serial identifier be ff ff ff ff 69 18 73 16 # (DEBUG) (READPORT 0x0203) (ISOLATE PRESERVE) (IDENTIFY *) (VERBOSITY 2) (CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING # Card 1: (serial identifier be ff ff ff ff 69 18 73 16) # Vendor Id ESS1869, No Serial Number (-1), checksum 0xBE. # Version 1.0, Vendor version 1.0 # ANSI string -->ESS ES1869 Plug and Play AudioDrive<-- # # Logical device id ESS0006 # Device supports vendor reserved register @ 0x38 # Device supports vendor reserved register @ 0x3c # Device supports vendor reserved register @ 0x3d # Device supports vendor reserved register @ 0x3e # Device supports vendor reserved register @ 0x3f # # Edit the entries below to uncomment out the configuration required. # Note that only the first value of any range is given, this may be changed if required # Don't forget to uncomment the activate (ACT Y) when happy (CONFIGURE ESS1869/-1 (LD 0 # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0800 # Maximum IO base address 0x0ff8 # IO base alignment 8 bytes # Number of IO addresses required: 8 (IO 0 (SIZE 8) (BASE 0x0800)) (NAME "ESS1869/-1[0]{ESS ES1869 Plug and Play AudioDrive}") (ACT Y) )) # # Logical device id ESS1869 # # Edit the entries below to uncomment out the configuration required. # Note that only the first value of any range is given, this may be changed if required # Don't forget to uncomment the activate (ACT Y) when happy (CONFIGURE ESS1869/-1 (LD 1 # Multiple choice time, choose one only ! # Start dependent functions: priority preferred # First DMA channel 1. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode # (DMA 0 (CHANNEL 1)) # Next DMA channel 0 or 3. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode # (DMA 1 (CHANNEL 0)) # IRQ 5. # High true, edge sensitive interrupt (by default) (INT 0 (IRQ 5 (MODE +E))) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0220 # Maximum IO base address 0x0220 # IO base alignment 0 bytes # Number of IO addresses required: 16 (IO 0 (SIZE 16) (BASE 0x0220)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0388 # Maximum IO base address 0x0388 # IO base alignment 0 bytes # Number of IO addresses required: 4 (IO 1 (SIZE 4) (BASE 0x0388)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0330 # Maximum IO base address 0x0330 # IO base alignment 0 bytes # Number of IO addresses required: 2 (IO 2 (SIZE 2) (BASE 0x0330)) # Start dependent functions: priority acceptable # First DMA channel 1. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode # (DMA 0 (CHANNEL 1)) # Next DMA channel 0 or 3. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode # (DMA 1 (CHANNEL 0)) # IRQ 5, 7, 9 or 10. # High true, edge sensitive interrupt (by default) # (INT 0 (IRQ 5 (MODE +E))) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0220 # Maximum IO base address 0x0240 # IO base alignment 32 bytes # Number of IO addresses required: 16 # (IO 0 (SIZE 16) (BASE 0x0220)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0388 # Maximum IO base address 0x0388 # IO base alignment 0 bytes # Number of IO addresses required: 4 # (IO 1 (SIZE 4) (BASE 0x0388)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0300 # Maximum IO base address 0x0330 # IO base alignment 48 bytes # Number of IO addresses required: 2 (IO 2 (SIZE 2) (BASE 0x0300)) # Start dependent functions: priority acceptable # First DMA channel 0, 1 or 3. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode # (DMA 0 (CHANNEL 0)) # Next DMA channel 0, 1 or 3. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode # (DMA 1 (CHANNEL 0)) # IRQ 5, 7, 9, 10, 11 or 12. # High true, edge sensitive interrupt (by default) # (INT 0 (IRQ 5 (MODE +E))) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0220 # Maximum IO base address 0x0280 # IO base alignment 32 bytes # Number of IO addresses required: 16 #(IO 0 (SIZE 16) (BASE 0x0220)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0388 # Maximum IO base address 0x0388 # IO base alignment 0 bytes # Number of IO addresses required: 4 # (IO 1 (SIZE 4) (BASE 0x0388)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0300 # Maximum IO base address 0x0330 # IO base alignment 48 bytes # Number of IO addresses required: 2 # (IO 2 (SIZE 2) (BASE 0x0300)) # Start dependent functions: priority acceptable # First DMA channel 0, 1 or 3. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode # (DMA 0 (CHANNEL 0)) # Next DMA channel 0, 1 or 3. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode # (DMA 1 (CHANNEL 0)) # IRQ 5, 7, 9, 10, 11 or 12. # High true, edge sensitive interrupt (by default) # (INT 0 (IRQ 5 (MODE +E))) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0220 # Maximum IO base address 0x0280 # IO base alignment 32 bytes # Number of IO addresses required: 16 # (IO 0 (SIZE 16) (BASE 0x0220)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0388 # Maximum IO base address 0x0388 # IO base alignment 0 bytes # Number of IO addresses required: 4 # (IO 1 (SIZE 4) (BASE 0x0388)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0800 # Maximum IO base address 0x0ffe # IO base alignment 2 bytes # Number of IO addresses required: 2 # (IO 2 (SIZE 2) (BASE 0x0800)) # Start dependent functions: priority functional # First DMA channel 0, 1 or 3. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode # (DMA 0 (CHANNEL 0)) # Next DMA channel 0, 1 or 3. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode # (DMA 1 (CHANNEL 0)) # IRQ 5, 7, 9, 10, 11 or 12. # High true, edge sensitive interrupt (by default) # (INT 0 (IRQ 5 (MODE +E))) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0220 # Maximum IO base address 0x0280 # IO base alignment 32 bytes # Number of IO addresses required: 16 # (IO 0 (SIZE 16) (BASE 0x0220)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0800 # Maximum IO base address 0x0ffc # IO base alignment 4 bytes # Number of IO addresses required: 4 # (IO 1 (SIZE 4) (BASE 0x0800)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0800 # Maximum IO base address 0x0ffe # IO base alignment 2 bytes # Number of IO addresses required: 2 # (IO 2 (SIZE 2) (BASE 0x0800)) # End dependent functions (NAME "ESS1869/-1[1]{ESS ES1869 Plug and Play AudioDrive}") (ACT Y) )) # # Logical device id ESS0001 # Device supports vendor reserved register @ 0x39 # Device supports vendor reserved register @ 0x3c # Device supports vendor reserved register @ 0x3d # Device supports vendor reserved register @ 0x3e # Device supports vendor reserved register @ 0x3f # # Edit the entries below to uncomment out the configuration required. # Note that only the first value of any range is given, this may be changed if required # Don't forget to uncomment the activate (ACT Y) when happy (CONFIGURE ESS1869/-1 (LD 2 # Multiple choice time, choose one only ! # Start dependent functions: priority preferred # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0201 # Maximum IO base address 0x0201 # IO base alignment 0 bytes # Number of IO addresses required: 1 (IO 0 (SIZE 1) (BASE 0x0201)) # Start dependent functions: priority acceptable # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0200 # Maximum IO base address 0x020f # IO base alignment 1 bytes # Number of IO addresses required: 1 (IO 0 (SIZE 1) (BASE 0x0200)) # End dependent functions # Compatible device id PNPb02f (NAME "ESS1869/-1[2]{ESS ES1869 Plug and Play AudioDrive}") (ACT Y) )) # # Logical device id ESS0002 # Device supports vendor reserved register @ 0x38 # Device supports vendor reserved register @ 0x3c # Device supports vendor reserved register @ 0x3d # Device supports vendor reserved register @ 0x3e # Device supports vendor reserved register @ 0x3f # # Edit the entries below to uncomment out the configuration required. # Note that only the first value of any range is given, this may be changed if required # Don't forget to uncomment the activate (ACT Y) when happy (CONFIGURE ESS1869/-1 (LD 3 # Multiple choice time, choose one only ! # Start dependent functions: priority preferred # IRQ 9, 10 or 11. # High true, edge sensitive interrupt (by default) (INT 0 (IRQ 9 (MODE +E))) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0168 # Maximum IO base address 0x0168 # IO base alignment 0 bytes # Number of IO addresses required: 8 (IO 0 (SIZE 8) (BASE 0x0168)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x036e # Maximum IO base address 0x036e # IO base alignment 0 bytes # Number of IO addresses required: 2 (IO 1 (SIZE 2) (BASE 0x036e)) # Start dependent functions: priority acceptable # IRQ 9, 10 or 11. # High true, edge sensitive interrupt (by default) # (INT 0 (IRQ 9 (MODE +E))) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x01e8 # Maximum IO base address 0x01e8 # IO base alignment 0 bytes # Number of IO addresses required: 8 # (IO 0 (SIZE 8) (BASE 0x01e8)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x03ee # Maximum IO base address 0x03ee # IO base alignment 0 bytes # Number of IO addresses required: 2 #(IO 1 (SIZE 2) (BASE 0x03ee)) # Start dependent functions: priority acceptable # IRQ 12. # High true, edge sensitive interrupt (by default) (INT 0 (IRQ 12 (MODE +E))) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0168 # Maximum IO base address 0x0168 # IO base alignment 0 bytes # Number of IO addresses required: 8 (IO 0 (SIZE 8) (BASE 0x0168)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x036e # Maximum IO base address 0x036e # IO base alignment 0 bytes # Number of IO addresses required: 2 (IO 1 (SIZE 2) (BASE 0x036e)) # Start dependent functions: priority acceptable # IRQ 12. # High true, edge sensitive interrupt (by default) #(INT 0 (IRQ 12 (MODE +E))) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x01e8 # Maximum IO base address 0x01e8 # IO base alignment 0 bytes # Number of IO addresses required: 8 # (IO 0 (SIZE 8) (BASE 0x01e8)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x03ee # Maximum IO base address 0x03ee # IO base alignment 0 bytes # Number of IO addresses required: 2 # (IO 1 (SIZE 2) (BASE 0x03ee)) # Start dependent functions: priority functional # IRQ 10, 11 or 12. # High true, edge sensitive interrupt (by default) (INT 0 (IRQ 10 (MODE +E))) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0100 # Maximum IO base address 0x01f8 # IO base alignment 8 bytes # Number of IO addresses required: 8 (IO 0 (SIZE 8) (BASE 0x0100)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0300 # Maximum IO base address 0x03fe # IO base alignment 2 bytes # Number of IO addresses required: 2 (IO 1 (SIZE 2) (BASE 0x0300)) # End dependent functions # Compatible device id PNP0600 (NAME "ESS1869/-1[3]{ESS ES1869 Plug and Play AudioDrive}") (ACT Y) )) # End tag... Checksum 0x00 (OK) # Returns all cards to the "Wait for Key" state (WAITFORKEY)