I was using Gpoto in my old SuSE 7.3, in my new 8.0 I can only find Gphoto2, and I cant start it witg a gui, when I use ghpoto2 in a consoll, only the help is starting, no gui. Can someone help me??? GunnarH
Use gtkam (in Graphics->Viewer->gtkam if you have installed it). Gphoto2 doesn't have its own GUI. There is also a KDE GUI for gphoto2, but it crashed when I tried to use it. JDL Gunnar Haaland wrote:
I was using Gpoto in my old SuSE 7.3, in my new 8.0 I can only find Gphoto2, and I cant start it witg a gui, when I use ghpoto2 in a consoll, only the help is starting, no gui. Can someone help me???
GunnarH
----- Original Message -----
From: "John Lamb"
Use gtkam (in Graphics->Viewer->gtkam if you have installed it). Gphoto2 doesn't have its own GUI.
There is also a KDE GUI for gphoto2, but it crashed when I tried to use it.
JDL
Thanks, I did find gtcam, but i am not able to use it, gtkam find my kodak 240 camera on usb, but it does not open the port, maybe some problem with permisson or something. I have done modprobe dc2xx, and with dmesg, I can see my camera on usb, dc2xx0, I have tried to chmod 666 to /dev/usd/dcxx0, still no camera working. Gphoto did work. I have tried to run gtkam as root, with the same result. Gunnar
It's a bug! I tried to detect my camera a second time and got the same error messages you did. Delete the .gphoto directory from your home directory and try again. It should work. No need to change permissions on /dev/usb/dc2xx* JDL Gunnar H wrote:
----- Original Message ----- From: "John Lamb"
Cc: Sent: Wednesday, May 08, 2002 9:14 AM Subject: Re: [SLE] Gphoto and SuSE 8.0 Use gtkam (in Graphics->Viewer->gtkam if you have installed it). Gphoto2 doesn't have its own GUI.
There is also a KDE GUI for gphoto2, but it crashed when I tried to use it.
JDL
Thanks, I did find gtcam, but i am not able to use it, gtkam find my kodak 240 camera on usb, but it does not open the port, maybe some problem with permisson or something. I have done modprobe dc2xx, and with dmesg, I can see my camera on usb, dc2xx0, I have tried to chmod 666 to /dev/usd/dcxx0, still no camera working. Gphoto did work. I have tried to run gtkam as root, with the same result. Gunnar
On Thursday 09 May 2002 20:34, John Lamb wrote:
It's a bug! I tried to detect my camera a second time and got the same error messages you did. Delete the .gphoto directory from your home directory and try again. It should work. No need to change permissions on /dev/usb/dc2xx* JDL
Gunnar H wrote:
----- Original Message ----- From: "John Lamb"
Cc: Sent: Wednesday, May 08, 2002 9:14 AM Hello again, sorry to write to you again, but no luck with gtkam. It detected my kodak camera on the usb, but it tells me this:
internally appending folder /... Creating new device... Setting abilibites ('Kodak DC240')... Looking for path 'usb:' (25 entries available)... Getting info of entry 23 (25 available)... Setting port info for port 'Universal Serial Bus' at 'usb:'... Setting timeout to 5000 millisecond(s)... Setting settings... Initializing camera... Looking for USB device (vendor 0x40a, product 0x120)... found. Detected defaults: config 1, interface 0, altsetting 0, inep 82, outep 01 Loading '/usr/lib/gphoto2/2.0/libgphoto2_kodak_dc240.so'... Opening USB port... *** ERROR *** Could not claim interface 0 (Suksess). Make sure no other program or kernel module (i.e. dc2xx) is using the device and you have read/write access to the device. Freeing camera... Freeing port... Closing port... *** ERROR *** Could not release interface 0 (Suksess). Internally deleting all folders from '/'... Does this mean something??? And why is the digikam not working??? Gunnar
Gunnar Haaland wrote:
Hello again, sorry to write to you again, but no luck with gtkam. It detected my kodak camera on the usb, but it tells me this:
*** ERROR *** Could not claim interface 0 (Suksess). Make sure no other program or kernel module (i.e. dc2xx) is using the device and you have read/write access to the device.
I managed to recreate this error by trying to run two instances of gtkam at once. My best guess is that you had done something similar while trying to set up. I would switch the camera off, reboot or remove the dc2xx0 module and then try again. I guess the digikam application is just not as well developed as gtkam and doesn't work for some cameras. JDL
--- John Lamb
Gunnar Haaland wrote:
Hello again, sorry to write to you again, but no luck with
gtkam.
It detected my kodak camera on the usb, but it tells me this:
*** ERROR *** Could not claim interface 0 (Suksess). Make sure no other program or kernel module (i.e. dc2xx) is using the device and you have read/write access to the device.
I managed to recreate this error by trying to run two instances of gtkam at once. My best guess is that you had done something similar while trying to set up. I would switch the camera off, reboot or remove the dc2xx0 module and then try again.
I guess the digikam application is just not as well developed as gtkam and doesn't work for some cameras.
JDL
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com
I have a kodak dc-3400 and ran into several problems in the past with gphoto, gphoto2 etc. Turns out that most linux kernels load the dc2xx module by default, which interferes with gphoto2. So, if you do a rmmod dc2xx and then run gphoto2 (say with the gui frontend, gtkam), the camera will now be detected and should work fine. See this tip in a forum (albeit mandrake related): http://www.mandrakeuser.org/docs/troubles/tqhvit2.html#kodak One last thing: I found another site that said none of the kodak cameras can be mounted as a drive using usb-storage module, so if that is your goal (instead of using gtkam, for example) then I would buy a cheap usb compactflash reader and mount that instead. HTH Charles __________________________________________________ Do You Yahoo!? Yahoo! Shopping - Mother's Day is May 12th! http://shopping.yahoo.com
participants (4)
-
Charles Griffin
-
Gunnar H
-
Gunnar Haaland
-
John Lamb