On 24 Feb, Frankie shouted: -> Ack, help. I can't seem for the life of me to get E (enlightenment window -> manager) to run on the NVidia SuSE X server. -> This is what happens when I perform a startx. -> All of the Imlib requirements have been successfully installed. -> -> E starts up and then hangs when it apparently has problems using the image -> formats in certain popular themes. This is the results. The only way out is -> a CTRL-ALT-BACKSPACE. -> -> Thanks in advance for any help regarding this matter. -> -> ------------------------------------------------------------------------- -> XSuSE_NVidia Version 2.0/ X Window System -> (protocol Version 11, revision 0, vendor release 6300) -> Release Date: 18 January 1997 -> If the server is older than 6-12 months, or if your card is newer -> than the above date, look for a newer version before reporting -> problems. Please report problems to x@suse.de -> Operating System: Linux 2.1.51 i686 [ELF] -> Configured drivers: -> SVGA: server for SVGA graphics adaptors (Patchlevel 0): -> NV1, STG2000, RIVA128 -> (using VT number 7) -> -> XF86Config: /etc/XF86Config -> (**) stands for supplied, (--) stands for probed/default values -> (**) XKB: keymap: "xfree86(us)" (overrides other XKB settings) -> (**) Mouse: type: PS/2, device: /dev/mouse, baudrate: 1200 -> (**) SVGA: Graphics device ID: "STB Velocity 128" -> (**) SVGA: Monitor ID: "My Monitor" -> (--) SVGA: Mode "640x480" needs vert refresh rate of 100.02 Hz. Deleted. -> (--) SVGA: Mode "800x600" needs vert refresh rate of 100.03 Hz. Deleted. -> (--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted. -> (--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted. -> (--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted. -> (--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted. -> (--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted. -> (--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted. -> (--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted. -> (--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted. -> (--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted. -> (--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted. -> (--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted. -> (--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted. -> (--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted. -> (--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted. -> (--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted. -> (--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted. -> (**) FontPath set to -> "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/us -> r/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/ -> X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X -> 11/fonts/100dpi/" -> (--) SVGA: PCI: Nvidia/SGS-Thomson RIVA 128 rev 16, Memory @ 0xfd000000, -> 0xf6000000 -> (--) SVGA: RIVA128: Setting RGB weight to 555 -> (--) SVGA: chipset: RIVA128 -> (**) SVGA: videoram: 4096k -> (**) SVGA: Using 16 bpp, Depth 16, Color weight: 555 -> (--) SVGA: Maximum allowed dot-clock: 230.000 MHz -> (**) SVGA: Mode "1280x1024": mode clock = 110.000 -> (**) SVGA: Mode "1024x768": mode clock = 85.000 -> (**) SVGA: Mode "800x600": mode clock = 60.750 -> (--) SVGA: Virtual resolution set to 1280x1024 -> (--) SVGA: SpeedUp code selection modified because virtualX != 1024 -> (--) SVGA: RIVA128: Using hardware cursor -> (--) SVGA: Using XAA (XFree86 Acceleration Architecture) -> (--) SVGA: XAA: Solid filled rectangles -> (--) SVGA: XAA: Screen-to-screen copy -> (--) SVGA: XAA: Indirect CPU to screen color expansion (imagetext, polytext) -> (--) SVGA: XAA: Using 10 128x128 areas for pixmap caching -> (--) SVGA: XAA: Caching tiles and non-transparent stipples -> (--) SVGA: XAA: Horizontal and vertical lines and segments -> Cannot open "keymap/xfree86" for reading -> Couldn't load XKB keymap, falling back to pre-XKB keymap -> Native PPM Loader -> Native PPM Loader -> Native PPM Loader -> Native PPM Loader -> Native PPM Loader -> Native PPM Loader -> Native PPM Loader -> Native PPM Loader -> Native PPM Loader -> Native PPM Loader -> Native PPM Loader -> X IO Fatal Error. -> Clean Exit. -> xinit: connection to X server lost. No it is using its native PPM loader fine - that is not he problem - that is what those messages are - the Xserver quits on E - the "x IO Fatal Error" means E lost its X connection - most likely because X just died. It could Be I've tickeld a nice bug in your Xserver - an Xserver does nto go crashing unless it has bugs. -> waiting for X server to shut down -> -> -> -> "Calm down. It's only -> \\|// ones and zeros." \\|// -> (@ @) -- Sam Kass -- (@ @) -> +~~~~~~ooO~~(_)~~Ooo~~~~~~~~~~+~~~~~~~ooO~~(_)~~Ooo~~~~~~~~~~+ -> | Frankie R. Ybanez | Chandler, Ehrlich, & Company | -> | Systems Administrator | Assoc. of Hill & Knowlton | -> | Phone: 901-761-5748 ext 337 | Fax: 901-345-9992 | -> | Ridgeway Center | Email: fybanez@cecnet.com | -> | 855 Ridge Lake Blvd STE 300 | <A HREF="http://www.CECNet.com"><A HREF="http://www.CECNet.com</A">http://www.CECNet.com</A</A>> | -> | Memphis, TN 38120 | <A HREF="http://www.searchmemphis.com"><A HREF="http://www.searchmemphis.com</A">http://www.searchmemphis.com</A</A>> | -> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+ -> -> - -> To unsubscribe from this list send mail to: majordomo@2rad.net -> with the message contents: unsubscribe e-develop -- --------------- Codito, ergo sum - "I code, therefore I am" -------------------- raster@rasterman.com /\___ /\ ___/||\___ ____/|/\___ raster@redhat.com Carsten Haitzler | _ //__\\ __||_ __\\ ___|| _ / Red Hat Advanced 218/21 Conner Drive || // __ \\_ \ | | \ _/_|| / Development Labs Chapel Hill NC 27514 USA ||\\\/ \//__/ |_| /___/||\\ 919 547 0012 ext 282 +1 (919) 929 9443, 801 4392 For pure Enlightenment<A HREF="http://www.rasterman.com/"><A HREF="http://www.rasterman.com/</A">http://www.rasterman.com/</A</A>> -- To get out of this list, please send email to majordomo@suse.com with this text in its body: unsubscribe suse-linux-e