---------- Original Message ---------------------------------- From: "Tom McCutcheon" <tom@netins.net> Date: Mon, 31 Oct 2005 12:27:40 -0600

-----Original Message----- From: Matt Stamm [mailto:mattsl@jemka.com] Sent: Monday, October 31, 2005 12:09 PM To: suse-linux-e@suse.com Subject: Re: [SLE] Suse 10 will not install

---------- Original Message ---------------------------------- From: Vivek R <trs.vivek@gmail.com> Date: Sun, 30 Oct 2005 02:38:45 +0530

...

hi, send your configuration that will help to know more abt your problem..

regards, vi

On 10/29/05, Stamm <mattsl@jemka.com> wrote:

...

I'm having an install problem with Suse 10. The first CD goes fine, then the system reboots and halts with the following...

GRUB Loading stage1.5

This is on a brand new PC purchased this month from Monarch Computer Systems. They are now offering to pre-install Suse 10 but were not when I ordered the system 3 weeks ago.

I purchased Suse 10 from CDW and its is the 32-bit version.

This PC is an AMD Sempron 64. I do get the following message when the install starts...

"Cool Computer but..." "You are installing 32 bit software on a 64 bit machine"

Could this be part of the problem?

Another point, I noticed this has a SATA hard drive. After some Googling

...

found out that SATA support is pretty new to Linux. Could this be a

I problem?

...

I've been using Suse 8.1 since it was released and that was my last linux install, so I'm a little rusty.

Pleas help!!

Matt

-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com

.

Vi,

Here's my configuration...

- Case: Monarch 1150 USB 2.0 Tower Case w/300 Watt Power Supply (Black)

- Motherboard: DFI K8M800-MLV K8M800 Onboard Audio, Video, SATA, LAN, USB, IEEE-1394

- Processor: AMD Sempron 2800+ 256K 90nm (754) w/AMD Certified Opteron/64/FX Heatsink

- Memory: 512 MB DDR (400) PC-3200 Corsair (VS512MB400)

- Hard Drive: Western Digital 80GB SATA 8MB Cache 7200 RPM (WD800JD)

- CD-ROM: LITE-ON SOHR-5239S 52X32X52 CD-RW (Black) (Retail Box)

Here's another thing I just noticed, and I posted this in response to Paul's suggestion. I wanted to see if I could install FreeDOS on this PC and had the following problem...

- booted to FreeDOS floppy, partitioned and formatted hard drive, everything went fine

- re-booted to floopy and formatted hard drive, went fine

- re-booted to floopy and Installed FreeDOS on harddrive using SYS, and copied files to harddrive. No problems

- tried to boot to harddrive and recieved same error "GRUB Loading stage1.5.".

- booted again to the floopy and all the files were on the harddrive.

Just can't boot to it. Any ideas?

Matt

-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com

-- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.12.6/151 - Release Date: 10/28/2005

I don't know if it works the same with 10.0 or not, but with the beta version you had to have the installation verify each cd before you could install them all this may be your problem. Hope this helps.

tom@netins.net

-- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.12.6/151 - Release Date: 10/28/2005

Tom, How do you have the install "verify" each CD?? Matt