![](https://seccdn.libravatar.org/avatar/fa5be548f3737b46b69d4788fb367572.jpg?s=120&d=mm&r=g)
I'm using a Promise Ultra 66 PCI card for my Linux drive. It seems to work fine - Linux recognizes the drive no prob. However, I do get some funky lilo messages, but I'm not sure if they are related to the promise card or not. Here's an example: linux:~ # lilo Warning: /dev/hde3 is not on the first disk Warning: BIOS drive 0x82 may not be accessible Warning: BIOS drive 0x82 may not be accessible Warning: BIOS drive 0x82 may not be accessible Warning: BIOS drive 0x82 may not be accessible Warning: BIOS drive 0x82 may not be accessible Added linux * Warning: BIOS drive 0x82 may not be accessible Warning: BIOS drive 0x82 may not be accessible Added linux_2.4 Warning: BIOS drive 0x82 may not be accessible Warning: BIOS drive 0x82 may not be accessible Added suse Added windows Warning: BIOS drive 0x82 may not be accessible Added memtest86 Anyway, it all seems to work....:) Mike --------------------------------------------------------------------- Cleary_Mike@emc.com x6033 ---------------------------------------------------------------------------- ---------- It said 'Requires Windows 95 or better". So I installed Linux... -----Original Message----- From: Robert Stragies [mailto:roast@studcs.uni-sb.de] Sent: Tuesday, February 27, 2001 10:22 AM To: suse-linux-e@suse.com Subject: [SLE] ultra dma 66 contollers hello all, could somebody post experiences with ultra66 controllers available as pci cards. I was opting for a promise fasttrack 66, but i read in the udma howto on linuxhq.com, that it was problematic to install with *recent* 2.2 kernels. As this document may be outdated, could somebody tell me (or point me to info) if this problematic situation is still the case? any other recommendations or tips? best regards, Alex -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq
![](https://seccdn.libravatar.org/avatar/eef1097463aabbbdc5722320fc17c83d.jpg?s=120&d=mm&r=g)
Hi mike, and all, thanks alot for the verz fast reply, maz i inquire about your kernel version? I want to use this controller for mirroring and striping, if possible with the hardware support for these operations. Also, mike, do you install lilo in the MBR of hda? I would like the drives connected to the Promise to be the onlz drives in my system. So i was wondering, if i could easily boot of this controller... I know, it is possible to do mirroring and striping using linux software, but doing it in hardware would be alot nicer.... Anybody? And best regards, Alex On Tue, 27 Feb 2001, Cleary, Mike wrote:
I'm using a Promise Ultra 66 PCI card for my Linux drive. It seems to work fine - Linux recognizes the drive no prob. However, I do get some funky lilo messages, but I'm not sure if they are related to the promise card or not. Here's an example:
linux:~ # lilo Warning: /dev/hde3 is not on the first disk Warning: BIOS drive 0x82 may not be accessible Warning: BIOS drive 0x82 may not be accessible Warning: BIOS drive 0x82 may not be accessible Warning: BIOS drive 0x82 may not be accessible Warning: BIOS drive 0x82 may not be accessible Added linux * Warning: BIOS drive 0x82 may not be accessible Warning: BIOS drive 0x82 may not be accessible Added linux_2.4 Warning: BIOS drive 0x82 may not be accessible Warning: BIOS drive 0x82 may not be accessible Added suse Added windows Warning: BIOS drive 0x82 may not be accessible Added memtest86
Anyway, it all seems to work....:)
Mike --------------------------------------------------------------------- Cleary_Mike@emc.com x6033 ---------------------------------------------------------------------------- ---------- It said 'Requires Windows 95 or better". So I installed Linux...
-----Original Message----- From: Robert Stragies [mailto:roast@studcs.uni-sb.de] Sent: Tuesday, February 27, 2001 10:22 AM To: suse-linux-e@suse.com Subject: [SLE] ultra dma 66 contollers
hello all,
could somebody post experiences with ultra66 controllers available as pci cards.
I was opting for a promise fasttrack 66, but i read in the udma howto on linuxhq.com, that it was problematic to install with *recent* 2.2 kernels. As this document may be outdated, could somebody tell me (or point me to info) if this problematic situation is still the case?
any other recommendations or tips?
best regards, Alex
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com
Also check the FAQ at http://www.suse.com/support/faq
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq
participants (2)
-
Cleary, Mike
-
Robert Stragies