[SLE] SETI work_Units on SuSE Linux 6.2
Hi, SuSErs :) On a Pentium 133 mhz, 1 SETI work unit took 30.2 hours. On an AMD K6/2 1 SETI work unit takes 15 hours ______________ Linux rated the Pentium 133 mhz as 53 bogo mips Linux rates the AMD K6/2 500 mhz as 999 bogo mips ______________ Why does the AMD K6/2 500 mhz seem to be lazing around with the SETI work_units . . . SuSE 6.2 ain't 'Slackware' ? ! ? Maybe its a Floating Point matter, with Fast Fourrier Transform ? Any views, please ? best :) -- ____________ sent on Linux ____________ -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
tabanna wrote:
Hi, SuSErs :)
On a Pentium 133 mhz, 1 SETI work unit took 30.2 hours. On an AMD K6/2 1 SETI work unit takes 15 hours ______________
Linux rated the Pentium 133 mhz as 53 bogo mips Linux rates the AMD K6/2 500 mhz as 999 bogo mips ______________
Why does the AMD K6/2 500 mhz seem to be lazing around with the SETI work_units . . . SuSE 6.2 ain't 'Slackware' ? !
?
Maybe its a Floating Point matter, with Fast Fourrier Transform ?
Any views, please ?
best :) --
30.2 to 15 hours doesn't look to bad. Bogo Mips look bad! They are what they are named: bogous. It's a "housenumber" and processortype dependent. You can compare them roughly between same type and brand of processors but that's all. Juergen -- =========================================== __ _ Juergen Braukmann juergen.braukmann@gmx.de| -o)/ / (_)__ __ ____ __ Tel: 0201-743648 dk4jb@db0qs.#nrw.deu.eu | /\\ /__/ / _ \/ // /\ \/ / ===========================================_\_v __/_/_//_/\_,_/ /_/\_\ -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
Hi I have a K6-2 500 and a K6-3 450. Don't worry so much about the bogo mips, they don't tell the full story. The 15 hours sounds about right for the K6-2. I turn one unit around in just under 15hr. with the K6-2 (999 bogo mips) 128MB Ram. The K6-3 turns one around in just over 12 hours (897 bogo mips) 128MB. It's the chip arch./motherboard combo not the MHz that seems to make the difference. I have a buddy who turns one unit in ~8.25 hours on a PIII 450. Oh, both kernels are compiled with th K6 options enabled. SETI sure is a nice floating point benchmark isn't it. The K6 family does seem to be weaker in the FP department than the PIII. Does anyone have any Athalon times? How does SuSE 6.4 behave with the K7? Mike On Fri, 12 May 2000, tabanna wrote:
Hi, SuSErs :)
On a Pentium 133 mhz, 1 SETI work unit took 30.2 hours. On an AMD K6/2 1 SETI work unit takes 15 hours ______________
Linux rated the Pentium 133 mhz as 53 bogo mips Linux rates the AMD K6/2 500 mhz as 999 bogo mips ______________
Why does the AMD K6/2 500 mhz seem to be lazing around with the SETI work_units . . . SuSE 6.2 ain't 'Slackware' ? !
?
Maybe its a Floating Point matter, with Fast Fourrier Transform ?
Any views, please ?
best :) -- ____________ sent on Linux ____________
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
Michael Mayo observed :- SETI sure is a nice floating point benchmark ______________________________________________ ~ Sure does . . . much better than bogomips ! best :) ____________ sent on Linux ____________ -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
On Fri, 12 May 2000, Michael Mayo wrote:
Does anyone have any Athalon times? How does SuSE 6.4 behave with the K7?
Mike
K7 600's are about 8-9 hours. not exact, but close. P3's seem to hit 10-12 hours, depending on Mhz. i plan to try seti on a UP2000 (dual 667 Mhz Alpha) soon. i'll post its scores when i find out. it would be nice if someone would write an MPI version of the seti client, so i could try it on a beowulf, with all processing power combined on a single unit. -- ======================================================================== Rocky McGaugh Atipa Linux Solutions Product Development www.atipa.com rocky@smluc.org rmcgaugh@atipa.com ======================================================================== -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
Rocky McGaugh wrote:
On Fri, 12 May 2000, Michael Mayo wrote:
Does anyone have any Athalon times? How does SuSE 6.4 behave with the K7?
Mike
K7 600's are about 8-9 hours. not exact, but close. P3's seem to hit 10-12 hours, depending on Mhz.
K7-700 about 7-8 hours (133 MhZ FSB) P3-450 (under wintendo, yuck) 8 hours. K6-2 500 14.5 - 15 hours. Erland. -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
I am averaging 17 hours based on the following systems (all running at once). Powermac 7100/66mhz, k6-2/350, k6-2/450, pII-300, pII-266, pIII-550 (laptop), and a p-120. All running SuSE or Debian. -----Original Message----- From: root [mailto:root]On Behalf Of Erland Moller Sent: Friday, May 12, 2000 8:24 PM To: Rocky McGaugh Cc: SuSE Linux English Subject: Re: [SLE] SETI work_Units on SuSE Linux 6.2 Rocky McGaugh wrote:
On Fri, 12 May 2000, Michael Mayo wrote:
Does anyone have any Athalon times? How does SuSE 6.4 behave with the K7?
Mike
K7 600's are about 8-9 hours. not exact, but close. P3's seem to hit 10-12 hours, depending on Mhz.
K7-700 about 7-8 hours (133 MhZ FSB) P3-450 (under wintendo, yuck) 8 hours. K6-2 500 14.5 - 15 hours. Erland. -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/ -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
Hi KULISHdotCOM! I wish I could do it at 17 hours, I avaerage around 126 hours per wu on a Cryix M2 (not Mii) chipped machine running SuSe 6.3. Think it is time to buy a new mobo :) Sean On Fri, 12 May 2000, KULISHdotCOM wrote:
I am averaging 17 hours based on the following systems (all running at once). Powermac 7100/66mhz, k6-2/350, k6-2/450, pII-300, pII-266, pIII-550 (laptop), and a p-120. All running SuSE or Debian.
-----Original Message----- From: root [mailto:root]On Behalf Of Erland Moller Sent: Friday, May 12, 2000 8:24 PM To: Rocky McGaugh Cc: SuSE Linux English Subject: Re: [SLE] SETI work_Units on SuSE Linux 6.2
Rocky McGaugh wrote:
On Fri, 12 May 2000, Michael Mayo wrote:
Does anyone have any Athalon times? How does SuSE 6.4 behave with the K7?
Mike
K7 600's are about 8-9 hours. not exact, but close. P3's seem to hit 10-12 hours, depending on Mhz.
K7-700 about 7-8 hours (133 MhZ FSB) P3-450 (under wintendo, yuck) 8 hours. K6-2 500 14.5 - 15 hours.
Erland.
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
-- Linux User: #124682 ICQ: 679813 My Current Uptime is 2d, 13h and 20m on Linux 2.2.13 ...What's a new brides' wedding night dread? Microsoft. -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
participants (7)
-
erland@pandora.be
-
juergen.braukmann@ruhr-west.de
-
mlmayo@texas.net
-
noc@kulish.com
-
rmcgaugh@atipa.com
-
sean.rima@tcob1.net
-
tabanna@aig.forthnet.gr