[opensuse] Smart array b110i sata RAID on Opensuse 11.4
Hello all, Anyone have an idea of how to use that controller on OpenSuSE 11.4? When i try to install the OS, it detects two drives, and not only one (Raid 1 is defined by controller Bios). How i can make it work? Cordially, Claudio Prono. -- -------------------------------------------------------------------------------- Claudio Prono OPST System Developer Gsm: +39-349-54.33.258 @PSS Srl Tel: +39-011-32.72.100 Via San Bernardino, 17 Fax: +39-011-32.46.497 10141 Torino - ITALY http://atpss.net/disclaimer -------------------------------------------------------------------------------- PGP Key - http://keys.atpss.net/c_prono.asc -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Claudio Prono wrote:
Hello all,
Anyone have an idea of how to use that controller on OpenSuSE 11.4? When i try to install the OS, it detects two drives, and not only one (Raid 1 is defined by controller Bios).
How i can make it work?
Hi Claudio you need to install the HP drivers, probably they're in the Proliant Support Pack or maybe on the HP website. -- Per Jessen, Zürich (19.2°C) -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Per Jessen wrote:
Claudio Prono wrote:
Hello all,
Anyone have an idea of how to use that controller on OpenSuSE 11.4? When i try to install the OS, it detects two drives, and not only one (Raid 1 is defined by controller Bios).
How i can make it work?
Hi Claudio
you need to install the HP drivers, probably they're in the Proliant Support Pack or maybe on the HP website.
Have a look here: http://www.linuxquestions.org/questions/linux-hardware-18/raid-array-not-det... -- Per Jessen, Zürich (19.2°C) -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
On Friday, May 6, 2011, Claudio Prono
Hello all,
Anyone have an idea of how to use that controller on OpenSuSE 11.4? When i try to install the OS, it detects two drives, and not only one (Raid 1 is defined by controller Bios).
How i can make it work?
All the HP raid controllers I've used have shown up like: /dev/cciss/c0d0p1 <- logical disk 0, partition 1 /dev/cciss/c0d0p2 <- logical disk 0, partition 2 Etc These controllers are aware of the partitions on the disk. Is this what you are seeing? -- Med Vennlig Hilsen, A. Helge Joakimsen -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
participants (3)
-
Andrew Joakimsen -
Claudio Prono -
Per Jessen