Ack, help. I can't seem for the life of me to get E (enlightenment window manager) to run on the NVidia SuSE X server. This is what happens when I perform a startx. All of the Imlib requirements have been successfully installed. E starts up and then hangs when it apparently has problems using the image formats in certain popular themes. This is the results. The only way out is a CTRL-ALT-BACKSPACE. Thanks in advance for any help regarding this matter. ------------------------------------------------------------------------- XSuSE_NVidia Version 2.0/ X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: 18 January 1997 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. Please report problems to x@suse.de Operating System: Linux 2.1.51 i686 [ELF] Configured drivers: SVGA: server for SVGA graphics adaptors (Patchlevel 0): NV1, STG2000, RIVA128 (using VT number 7) XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: keymap: "xfree86(us)" (overrides other XKB settings) (**) Mouse: type: PS/2, device: /dev/mouse, baudrate: 1200 (**) SVGA: Graphics device ID: "STB Velocity 128" (**) SVGA: Monitor ID: "My Monitor" (--) SVGA: Mode "640x480" needs vert refresh rate of 100.02 Hz. Deleted. (--) SVGA: Mode "800x600" needs vert refresh rate of 100.03 Hz. Deleted. (--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted. (--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted. (--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted. (--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted. (--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted. (--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted. (--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted. (--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted. (--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted. (--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted. (--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/us r/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/ X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X 11/fonts/100dpi/" (--) SVGA: PCI: Nvidia/SGS-Thomson RIVA 128 rev 16, Memory @ 0xfd000000, 0xf6000000 (--) SVGA: RIVA128: Setting RGB weight to 555 (--) SVGA: chipset: RIVA128 (**) SVGA: videoram: 4096k (**) SVGA: Using 16 bpp, Depth 16, Color weight: 555 (--) SVGA: Maximum allowed dot-clock: 230.000 MHz (**) SVGA: Mode "1280x1024": mode clock = 110.000 (**) SVGA: Mode "1024x768": mode clock = 85.000 (**) SVGA: Mode "800x600": mode clock = 60.750 (--) SVGA: Virtual resolution set to 1280x1024 (--) SVGA: SpeedUp code selection modified because virtualX != 1024 (--) SVGA: RIVA128: Using hardware cursor (--) SVGA: Using XAA (XFree86 Acceleration Architecture) (--) SVGA: XAA: Solid filled rectangles (--) SVGA: XAA: Screen-to-screen copy (--) SVGA: XAA: Indirect CPU to screen color expansion (imagetext, polytext) (--) SVGA: XAA: Using 10 128x128 areas for pixmap caching (--) SVGA: XAA: Caching tiles and non-transparent stipples (--) SVGA: XAA: Horizontal and vertical lines and segments Cannot open "keymap/xfree86" for reading Couldn't load XKB keymap, falling back to pre-XKB keymap Native PPM Loader Native PPM Loader Native PPM Loader Native PPM Loader Native PPM Loader Native PPM Loader Native PPM Loader Native PPM Loader Native PPM Loader Native PPM Loader Native PPM Loader X IO Fatal Error. Clean Exit. xinit: connection to X server lost. waiting for X server to shut down "Calm down. It's only \\|// ones and zeros." \\|// (@ @) -- Sam Kass -- (@ @) +~~~~~~ooO~~(_)~~Ooo~~~~~~~~~~+~~~~~~~ooO~~(_)~~Ooo~~~~~~~~~~+ | Frankie R. Ybanez | Chandler, Ehrlich, & Company | | Systems Administrator | Assoc. of Hill & Knowlton | | Phone: 901-761-5748 ext 337 | Fax: 901-345-9992 | | Ridgeway Center | Email: fybanez@cecnet.com | | 855 Ridge Lake Blvd STE 300 | <A HREF="http://www.CECNet.com"><A HREF="http://www.CECNet.com</A">http://www.CECNet.com</A</A>> | | Memphis, TN 38120 | <A HREF="http://www.searchmemphis.com"><A HREF="http://www.searchmemphis.com</A">http://www.searchmemphis.com</A</A>> | +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+ -- To get out of this list, please send email to majordomo@suse.com with this text in its body: unsubscribe suse-linux-e