Hi all, --- 2 Problems with K3b on Novell SuSE 10.0 Boxed version --- *************** :: Problem 1 :: Cannot copy encrypted DVD I have created a Data DVD 4,7 GB with only data files. It is a DVD-RW. Now I wan't to copy the DVD to a normal DVD-R 4,7 GB. In K3b the error "Found encrypted DVD. Cannot copy encrypted DVDs" occurs. Debugging output of K3b: System ----------------------- K3b Version: 0.12 KDE Version: 3.4.2 Level "b" QT Version: 3.3.4 Kernel: 2.6.13-15.7-default Devices ----------------------- TEAC DV-W50D 1.05 (/dev/hdb, ) at /media/dvdrecorder [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-R; DVD-RW; DVD+R; DVD+RW] [DVD-ROM; DVD-R Sequential; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD +R; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite] HL-DT-ST DVD-ROM GDR8163B 0L23 (/dev/hdc, ) at /media/dvd [CD-ROM; DVD-ROM] [DVD-ROM; CD-ROM] [None] I'm sure it is not a encrypted! Where do I look for the solution? *************** :: Problem 2 :: "Project does not contain all necessary VideoDVD files". I used the options: "New Video DVD Project". I copied the *.mpg / *.mpeg file into the "VIDEO_TS" sub-directory. Then I tried to burn the new Video DVD. It is from a recording with my Video camera captured as a PAL DVD *.mpeg/*.mpg compatible file. This time K3b reports: System ----------------------- K3b Version: 0.12 KDE Version: 3.4.2 Level "b" QT Version: 3.3.4 Kernel: 2.6.13-15.7-default Devices ----------------------- TEAC DV-W50D 1.05 (/dev/hdb, ) at /media/dvdrecorder [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-R; DVD-RW; DVD+R; DVD+RW] [DVD-ROM; DVD-R Sequential; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD +R; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite] HL-DT-ST DVD-ROM GDR8163B 0L23 (/dev/hdc, ) at /media/dvd [CD-ROM; DVD-ROM] [DVD-ROM; CD-ROM] [None] K3b ----------------------- Size of filesystem calculated: 0 Used versions ----------------------- mkisofs: 2.1 mkisofs ----------------------- /usr/bin/mkisofs: Warning: -follow-links does not always work correctly; be careful. Warning: Disabling Joliet support for DVD-Video. /usr/bin/mkisofs: No such file or directory. Faild to open /tmp/kde-root/k3bVideoDvd0//VIDEO_TS/VIDEO_TS.IFO /usr/bin/mkisofs: Can't open VMG info for '/tmp/kde-root/k3bVideoDvd0/'. /usr/bin/mkisofs: Unable to parse DVD-Video structures. /usr/bin/mkisofs: Unable to make a DVD-Video image. As you can see, I even tried as root. Any help appreciated! :-) L3
On Sunday 18 December 2005 05:22 pm, LLLActive@GMX.Net wrote:
Hi all,
--- 2 Problems with K3b on Novell SuSE 10.0 Boxed version ---
***************
Ok, this is the second time you have posted this. I asked you some simple questions earlier to which I have not seen the answers. You help us... we'll try to help you.
:: Problem 1 :: Cannot copy encrypted DVD
I have created a Data DVD 4,7 GB with only data files. It is a DVD-RW. Now I wan't to copy the DVD to a normal DVD-R 4,7 GB. In K3b the error "Found encrypted DVD. Cannot copy encrypted DVDs" occurs.
Debugging output of K3b:
System ----------------------- K3b Version: 0.12
KDE Version: 3.4.2 Level "b" QT Version: 3.3.4 Kernel: 2.6.13-15.7-default Devices ----------------------- TEAC DV-W50D 1.05 (/dev/hdb, ) at /media/dvdrecorder [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-R; DVD-RW; DVD+R; DVD+RW] [DVD-ROM; DVD-R Sequential; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD +R; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite]
HL-DT-ST DVD-ROM GDR8163B 0L23 (/dev/hdc, ) at /media/dvd [CD-ROM; DVD-ROM] [DVD-ROM; CD-ROM] [None]
I'm sure it is not a encrypted! Where do I look for the solution?
***************
:: Problem 2 :: "Project does not contain all necessary VideoDVD files".
I used the options: "New Video DVD Project". I copied the *.mpg / *.mpeg file into the "VIDEO_TS" sub-directory. Then I tried to burn the new Video DVD. It is from a recording with my Video camera captured as a PAL DVD *.mpeg/*.mpg compatible file. This time K3b reports:
System ----------------------- K3b Version: 0.12
KDE Version: 3.4.2 Level "b" QT Version: 3.3.4 Kernel: 2.6.13-15.7-default Devices ----------------------- TEAC DV-W50D 1.05 (/dev/hdb, ) at /media/dvdrecorder [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-R; DVD-RW; DVD+R; DVD+RW] [DVD-ROM; DVD-R Sequential; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD +R; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite]
HL-DT-ST DVD-ROM GDR8163B 0L23 (/dev/hdc, ) at /media/dvd [CD-ROM; DVD-ROM] [DVD-ROM; CD-ROM] [None] K3b ----------------------- Size of filesystem calculated: 0
Used versions ----------------------- mkisofs: 2.1
mkisofs ----------------------- /usr/bin/mkisofs: Warning: -follow-links does not always work correctly; be careful. Warning: Disabling Joliet support for DVD-Video. /usr/bin/mkisofs: No such file or directory. Faild to open /tmp/kde-root/k3bVideoDvd0//VIDEO_TS/VIDEO_TS.IFO /usr/bin/mkisofs: Can't open VMG info for '/tmp/kde-root/k3bVideoDvd0/'. /usr/bin/mkisofs: Unable to parse DVD-Video structures. /usr/bin/mkisofs: Unable to make a DVD-Video image.
As you can see, I even tried as root. Any help appreciated!
:-)
L3
On Sun, 2005-12-18 at 17:31 -0500, Bruce Marshall wrote:
On Sunday 18 December 2005 05:22 pm, LLLActive@GMX.Net wrote:
Hi all,
--- 2 Problems with K3b on Novell SuSE 10.0 Boxed version ---
***************
Ok, this is the second time you have posted this.
Your right, I had some problems with the mails to the list using my GMail account. I'm using another e-mail account now.
I asked you some simple questions earlier to which I have not seen the answers.
You help us... we'll try to help you.
I can't find your answer, got muddled up with my changing e-mail addresses I think. Svetoslav Milenov (Sunny) answered on the old mail address. But since his answer, some other problems occurred and I put them both in a new thread (thought the old one didn't work).
:: Problem 1 :: Cannot copy encrypted DVD
I have created a Data DVD 4,7 GB with only data files. It is a DVD-RW. Now I wan't to copy the DVD to a normal DVD-R 4,7 GB. In K3b the error "Found encrypted DVD. Cannot copy encrypted DVDs" occurs.
Debugging output of K3b:
System ----------------------- K3b Version: 0.12
KDE Version: 3.4.2 Level "b" QT Version: 3.3.4 Kernel: 2.6.13-15.7-default Devices ----------------------- TEAC DV-W50D 1.05 (/dev/hdb, ) at /media/dvdrecorder [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-R; DVD-RW; DVD+R; DVD+RW] [DVD-ROM; DVD-R Sequential; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD +R; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite]
HL-DT-ST DVD-ROM GDR8163B 0L23 (/dev/hdc, ) at /media/dvd [CD-ROM; DVD-ROM] [DVD-ROM; CD-ROM] [None]
I'm sure it is not a encrypted! Where do I look for the solution?
To answer Sunny: On Sun, 2005-12-18 at 16:41 -0600, Sunny wrote:
Are you really really sure you have the DVD-RW in the reader and a new blank media in the writer? :)
I cleaned the DVD-RW with "Tools - Format DVD+-RW". It worked. The first time I burned this DVD-RW it worked, but I had SuSE 9.3 then.
Also, are you sure that your reader can read DVD-RW? I have some devices (old) which can not read DVD+ or - RW, while they are OK with DVD+/-R. Just have problems with rewritables. To check this, try to copy some files from that drive/disk to your HDD.
It copied OK to the HDD. If you check the debug output, the TEAC DV-W50D 1.05 claims it can write DVD-RW and DVD+RW. It also did it before. It seems not to be a problem with the drive. With SuSE 9.3 it worked.
If the above fails, than you should use same device (the writer) for reading and writing.
Will have to try that.
Or, you can create an .iso image from the already burned DVD-RW and then use k3b to burn the image to a new media.
It delivers the same error when it started writing the ISO.
Svetoslav Milenov (Sunny)
***************
:: Problem 2 :: "Project does not contain all necessary VideoDVD files".
I used the options: "New Video DVD Project". I copied the *.mpg / *.mpeg file into the "VIDEO_TS" sub-directory. Then I tried to burn the new Video DVD. It is from a recording with my Video camera captured as a PAL DVD *.mpeg/*.mpg compatible file. This time K3b reports:
System ----------------------- K3b Version: 0.12
KDE Version: 3.4.2 Level "b" QT Version: 3.3.4 Kernel: 2.6.13-15.7-default Devices ----------------------- TEAC DV-W50D 1.05 (/dev/hdb, ) at /media/dvdrecorder [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-R; DVD-RW; DVD+R; DVD+RW] [DVD-ROM; DVD-R Sequential; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD +R; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite]
HL-DT-ST DVD-ROM GDR8163B 0L23 (/dev/hdc, ) at /media/dvd [CD-ROM; DVD-ROM] [DVD-ROM; CD-ROM] [None] K3b ----------------------- Size of filesystem calculated: 0
Used versions ----------------------- mkisofs: 2.1
mkisofs ----------------------- /usr/bin/mkisofs: Warning: -follow-links does not always work correctly; be careful. Warning: Disabling Joliet support for DVD-Video. /usr/bin/mkisofs: No such file or directory. Faild to open /tmp/kde-root/k3bVideoDvd0//VIDEO_TS/VIDEO_TS.IFO /usr/bin/mkisofs: Can't open VMG info for '/tmp/kde-root/k3bVideoDvd0/'. /usr/bin/mkisofs: Unable to parse DVD-Video structures. /usr/bin/mkisofs: Unable to make a DVD-Video image.
As you can see, I even tried as root. Any help appreciated!
:-)
L3
On Mon, 2005-12-19 at 11:40 +0100, LLLActive@GMX.Net wrote:
On Sun, 2005-12-18 at 17:31 -0500, Bruce Marshall wrote:
On Sunday 18 December 2005 05:22 pm, LLLActive@GMX.Net wrote:
Hi all,
--- 2 Problems with K3b on Novell SuSE 10.0 Boxed version ---
***************
Ok, this is the second time you have posted this.
Your right, I had some problems with the mails to the list using my GMail account. I'm using another e-mail account now.
I asked you some simple questions earlier to which I have not seen the answers.
You help us... we'll try to help you.
I can't find your answer, got muddled up with my changing e-mail addresses I think.
Svetoslav Milenov (Sunny) answered on the old mail address. But since his answer, some other problems occurred and I put them both in a new thread (thought the old one didn't work).
<big snip> Perhaps that is why there are list archives that can be searched rather than just re-posting the question again. In google you can use site:list.suse.com (enter search items here) to search the archives. -- Ken Schneider UNIX since 1989, linux since 1994, SuSE since 1998
On Mon, 2005-12-19 at 09:34 -0500, Ken Schneider wrote:
On Mon, 2005-12-19 at 11:40 +0100, LLLActive@GMX.Net wrote:
On Sun, 2005-12-18 at 17:31 -0500, Bruce Marshall wrote:
On Sunday 18 December 2005 05:22 pm, LLLActive@GMX.Net wrote:
Hi all,
--- 2 Problems with K3b on Novell SuSE 10.0 Boxed version ---
***************
Ok, this is the second time you have posted this.
Your right, I had some problems with the mails to the list using my GMail account. I'm using another e-mail account now.
I asked you some simple questions earlier to which I have not seen the answers.
Hi Bruce, Pardon. Answering your questions;
Can you mount the dvd and read from it? Are you trying to copy from the same drive that created it? (just thinking 'read error' here)
Yes, I can mount it, copy it to HDD and even wipe/format the DVD-R with K3b. It was originally created with the drive but on SuSE 9.3 though.
Svetoslav Milenov (Sunny) answered on the old mail address. But since his answer, some other problems occurred and I put them both in a new thread (thought the old one didn't work).
<big snip>
Perhaps that is why there are list archives that can be searched rather than just re-posting the question again. In google you can use site:list.suse.com (enter search items here) to search the archives.
-- Ken Schneider UNIX since 1989, linux since 1994, SuSE since 1998
:-/ Al
On Monday 19 December 2005 10:01, LLLActive@GMX.Net wrote:
Hi Bruce, Pardon. Answering your questions;
Can you mount the dvd and read from it? Are you trying to copy from the same drive that created it? (just thinking 'read error' here)
Yes, I can mount it, copy it to HDD and even wipe/format the DVD-R with K3b. It was originally created with the drive but on SuSE 9.3 though.
Thanks for the answers... I don't use k3b enough to help but since you can copy it to the HD, I'm wondering if DD could be used to write it back out. Anyone have an answer to that?
On 12/19/05, Bruce Marshall <bmarsh@bmarsh.com> wrote:
On Monday 19 December 2005 10:01, LLLActive@GMX.Net wrote:
Hi Bruce, Pardon. Answering your questions;
Can you mount the dvd and read from it? Are you trying to copy from the same drive that created it? (just thinking 'read error' here)
Yes, I can mount it, copy it to HDD and even wipe/format the DVD-R with K3b. It was originally created with the drive but on SuSE 9.3 though.
Thanks for the answers... I don't use k3b enough to help but since you can copy it to the HD, I'm wondering if DD could be used to write it back out.
Anyone have an answer to that?
There should be no problem with dd. I never had any. dd if=/dev/dvdreader of=myimage.iso The use k3b to burn the iso file to a disk - Tools menu. Cheers -- Svetoslav Milenov (Sunny)
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 The Monday 2005-12-19 at 11:14 -0500, Bruce Marshall wrote:
Thanks for the answers... I don't use k3b enough to help but since you can copy it to the HD, I'm wondering if DD could be used to write it back out.
Anyone have an answer to that?
To the CD/DVD? No. You could use cdrecord, for example, which is one of the programs used by gui frontends like k3b. Or growisofs. Have a look at /usr/share/doc/howto/en/txt/CD-Writing-HOWTO.gz for the method using cdrecord. - -- Cheers, Carlos Robinson -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.0 (GNU/Linux) Comment: Made with pgp4pine 1.76 iD8DBQFDpxjhtTMYHG2NR9URAiZ0AJ9h4hIn3pSzaXitW2qjDeVbPqq5AQCgiDCQ jT50sLNcCwX17xdhlrsXAfE= =bwjy -----END PGP SIGNATURE-----
participants (5)
-
Bruce Marshall -
Carlos E. R. -
Ken Schneider -
LLLActive＠GMX.Net -
Sunny