[opensuse] Suspend to disk and USB device
Hi everybody, if I suspend to disk I loose the USB hub. I also tried to unload the related modules before suspending: SUSPEND_MODULES="button uhci_hcd ehci_hcd usbhid usbcore" The messages (see below) report an error related to uhci_hcd and HCRESET, I googled the problem but I couldn't find a solution. Does anybody have experience with this? Many thanks, G Feb 13 18:12:45 cms09xl kernel: usb usb4: root hub lost power or was reset Feb 13 18:12:45 cms09xl kernel: ehci_hcd 0000:00:1d.7: debug port 1 IN USE Feb 13 18:12:45 cms09xl kernel: PCI: cache line size of 32 is not supported by device 0000:00:1d.7 Feb 13 18:12:45 cms09xl kernel: ehci_hcd 0000:00:1d.7: PCI post-resume error -19! Feb 13 18:12:45 cms09xl kernel: ehci_hcd 0000:00:1d.7: HC died; cleaning up Feb 13 18:12:45 cms09xl kernel: PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20020200, writing 20060200) Feb 13 18:12:45 cms09xl kernel: PCI: Setting latency timer of device 0000:00:1e.0 to 64 Feb 13 18:12:45 cms09xl kernel: PM: Writing back config space on device 0000:00:1f.5 at offset 1 (was 2900007, writing 2900000) Feb 13 18:12:45 cms09xl kernel: PCI: Enabling device 0000:00:1f.5 (0000 -> 0003) Feb 13 18:12:45 cms09xl kernel: ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 Feb 13 18:12:45 cms09xl kernel: PCI: Setting latency timer of device 0000:00:1f.5 to 64 Feb 13 18:12:45 cms09xl kernel: eth1: Coming out of suspend... Feb 13 18:12:45 cms09xl kernel: ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 Feb 13 18:12:46 cms09xl kernel: PM: Writing back config space on device 0000:02:03.0 at offset f (was 1c00105, writing 5c00105) Feb 13 18:12:46 cms09xl kernel: PM: Writing back config space on device 0000:02:03.0 at offset 3 (was 28008, writing 2a820) Feb 13 18:12:46 cms09xl kernel: ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 Feb 13 18:12:46 cms09xl kernel: pnp: Device 00:06 does not support activation. Feb 13 18:12:46 cms09xl kernel: pnp: Device 00:07 does not support activation. Feb 13 18:12:46 cms09xl kernel: pnp: Device 00:09 activated. Feb 13 18:12:46 cms09xl kernel: Restarting tasks... done Feb 13 18:12:46 cms09xl kernel: Thawing cpus ... Feb 13 18:12:51 cms09xl kernel: USB Universal Host Controller Interface driver v3.0 Feb 13 18:12:51 cms09xl kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 Feb 13 18:12:51 cms09xl kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64 Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.0: HCRESET not completed yet! Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001200 Feb 13 18:12:51 cms09xl kernel: usb usb1: new device found, idVendor=0000, idProduct=0000 Feb 13 18:12:51 cms09xl kernel: usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 Feb 13 18:12:51 cms09xl kernel: usb usb1: Product: UHCI Host Controller Feb 13 18:12:51 cms09xl kernel: usb usb1: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd Feb 13 18:12:51 cms09xl kernel: usb usb1: SerialNumber: 0000:00:1d.0 Feb 13 18:12:51 cms09xl kernel: usb usb1: configuration #1 chosen from 1 choice Feb 13 18:12:51 cms09xl kernel: hub 1-0:1.0: USB hub found Feb 13 18:12:51 cms09xl kernel: hub 1-0:1.0: 0 ports detected Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.0: host system error, PCI problems? Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.0: host controller process error, something bad happened! Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.0: host controller halted, very bad! Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.0: HCRESET not completed yet! Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.0: HC died; cleaning up Feb 13 18:12:51 cms09xl kernel: hub 1-0:1.0: activate --> -108 Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.0: HC died; cleaning up Feb 13 18:12:51 cms09xl kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 Feb 13 18:12:51 cms09xl kernel: PCI: Setting latency timer of device 0000:00:1d.1 to 64 Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.1: HCRESET not completed yet! Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.1: irq 10, io base 0x00001600 Feb 13 18:12:52 cms09xl kernel: usb usb2: new device found, idVendor=0000, idProduct=0000 Feb 13 18:12:52 cms09xl kernel: usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 Feb 13 18:12:52 cms09xl kernel: usb usb2: Product: UHCI Host Controller Feb 13 18:12:52 cms09xl kernel: usb usb2: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd Feb 13 18:12:52 cms09xl kernel: usb usb2: SerialNumber: 0000:00:1d.1 Feb 13 18:12:52 cms09xl kernel: usb usb2: configuration #1 chosen from 1 choice Feb 13 18:12:52 cms09xl kernel: hub 2-0:1.0: USB hub found Feb 13 18:12:52 cms09xl kernel: hub 2-0:1.0: 0 ports detected Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.1: host system error, PCI problems? Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.1: host controller process error, something bad happened! Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.1: host controller halted, very bad! Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.1: HCRESET not completed yet! Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.1: HC died; cleaning up Feb 13 18:12:52 cms09xl kernel: hub 2-0:1.0: activate --> -108 Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.1: HC died; cleaning up Feb 13 18:12:52 cms09xl kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 Feb 13 18:12:52 cms09xl kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64 Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.2: HCRESET not completed yet! Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001700 Feb 13 18:12:52 cms09xl kernel: usb usb3: new device found, idVendor=0000, idProduct=0000 Feb 13 18:12:52 cms09xl kernel: usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 Feb 13 18:12:52 cms09xl kernel: usb usb3: Product: UHCI Host Controller Feb 13 18:12:52 cms09xl kernel: usb usb3: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd Feb 13 18:12:52 cms09xl kernel: usb usb3: SerialNumber: 0000:00:1d.2 Feb 13 18:12:52 cms09xl kernel: usb usb3: configuration #1 chosen from 1 choice Feb 13 18:12:52 cms09xl kernel: hub 3-0:1.0: USB hub found Feb 13 18:12:52 cms09xl kernel: hub 3-0:1.0: 0 ports detected Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.2: host system error, PCI problems? Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.2: host controller process error, something bad happened! Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.2: host controller halted, very bad! Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.2: HCRESET not completed yet! Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.2: HC died; cleaning up Feb 13 18:12:52 cms09xl kernel: hub 3-0:1.0: activate --> -108 Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.2: HC died; cleaning up -- -------------------------- Gianluca Cerminara Tel. CERN +41 (0)22 76 71519 Tel. TO +39 011 670 7372 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
participants (1)
-
Gianluca Cerminara