
I bought 2 Linksys switches (hubs) with auto-sensing. One is a 5 ports the other 8 port. I configure the network card on my systems to be auto-sense for speed and duplex. On the 5 port switch the 2 systems are running at 100Mps Full-Duplex. When I try to up-link to the other switch, I cannot see the other systems attached to the other switch. Has anyone encounter this type of problem? Thanks Manny -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq

Hi Manny, On Fri, 15 Sep 2000, Manuel J. Martins wrote:
I bought 2 Linksys switches (hubs) with auto-sensing.
One is a 5 ports the other 8 port.
I configure the network card on my systems to be auto-sense for speed and duplex. On the 5 port switch the 2 systems are running at 100Mps Full-Duplex. When I try to up-link to the other switch, I cannot see the other systems attached to the other switch.
Has anyone encounter this type of problem?
Thanks
Manny
What type of cable are you using? Also how are you connecting the two hubs together? I bet that you are using the wrong type cable. If you are using a patch cable try using a crossover cable. If that does not work email me privatly and we'll work on it. Later! Jim Hatridge hatridge@straubing.baynet.de Proud Linux User #88484 VOTE Harry Browne www.HarryBrowne2000.org and www.lp.org ------------------------------------------------------------------------ Jim's Beowulf Project Looking for giveaway computers and parts I need it all! Email Jim for details on how you can help build a poor man's super computer. -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq
participants (2)
-
hatridge@straubing.baynet.de
-
mmartins@openmarket.com